334 research outputs found
An Assessment to Benchmark the Seismic Performance of a Code-Conforming Reinforced-Concrete Moment-Frame Building
This report describes a state-of-the-art performance-based earthquake engineering methodology
that is used to assess the seismic performance of a four-story reinforced concrete (RC) office
building that is generally representative of low-rise office buildings constructed in highly seismic
regions of California. This “benchmark” building is considered to be located at a site in the Los
Angeles basin, and it was designed with a ductile RC special moment-resisting frame as its
seismic lateral system that was designed according to modern building codes and standards. The
building’s performance is quantified in terms of structural behavior up to collapse, structural and
nonstructural damage and associated repair costs, and the risk of fatalities and their associated
economic costs. To account for different building configurations that may be designed in
practice to meet requirements of building size and use, eight structural design alternatives are
used in the performance assessments.
Our performance assessments account for important sources of uncertainty in the ground
motion hazard, the structural response, structural and nonstructural damage, repair costs, and
life-safety risk. The ground motion hazard characterization employs a site-specific probabilistic
seismic hazard analysis and the evaluation of controlling seismic sources (through
disaggregation) at seven ground motion levels (encompassing return periods ranging from 7 to
2475 years). Innovative procedures for ground motion selection and scaling are used to develop
acceleration time history suites corresponding to each of the seven ground motion levels.
Structural modeling utilizes both “fiber” models and “plastic hinge” models. Structural
modeling uncertainties are investigated through comparison of these two modeling approaches,
and through variations in structural component modeling parameters (stiffness, deformation
capacity, degradation, etc.). Structural and nonstructural damage (fragility) models are based on
a combination of test data, observations from post-earthquake reconnaissance, and expert
opinion. Structural damage and repair costs are modeled for the RC beams, columns, and slabcolumn connections. Damage and associated repair costs are considered for some nonstructural
building components, including wallboard partitions, interior paint, exterior glazing, ceilings,
sprinkler systems, and elevators. The risk of casualties and the associated economic costs are
evaluated based on the risk of structural collapse, combined with recent models on earthquake
fatalities in collapsed buildings and accepted economic modeling guidelines for the value of
human life in loss and cost-benefit studies.
The principal results of this work pertain to the building collapse risk, damage and repair
cost, and life-safety risk. These are discussed successively as follows.
When accounting for uncertainties in structural modeling and record-to-record variability
(i.e., conditional on a specified ground shaking intensity), the structural collapse probabilities of
the various designs range from 2% to 7% for earthquake ground motions that have a 2%
probability of exceedance in 50 years (2475 years return period). When integrated with the
ground motion hazard for the southern California site, the collapse probabilities result in mean
annual frequencies of collapse in the range of [0.4 to 1.4]x10
-4
for the various benchmark
building designs. In the development of these results, we made the following observations that
are expected to be broadly applicable:
(1) The ground motions selected for performance simulations must consider spectral
shape (e.g., through use of the epsilon parameter) and should appropriately account for
correlations between motions in both horizontal directions;
(2) Lower-bound component models, which are commonly used in performance-based
assessment procedures such as FEMA 356, can significantly bias collapse analysis results; it is
more appropriate to use median component behavior, including all aspects of the component
model (strength, stiffness, deformation capacity, cyclic deterioration, etc.);
(3) Structural modeling uncertainties related to component deformation capacity and
post-peak degrading stiffness can impact the variability of calculated collapse probabilities and
mean annual rates to a similar degree as record-to-record variability of ground motions.
Therefore, including the effects of such structural modeling uncertainties significantly increases
the mean annual collapse rates. We found this increase to be roughly four to eight times relative
to rates evaluated for the median structural model;
(4) Nonlinear response analyses revealed at least six distinct collapse mechanisms, the
most common of which was a story mechanism in the third story (differing from the multi-story
mechanism predicted by nonlinear static pushover analysis);
(5) Soil-foundation-structure interaction effects did not significantly affect the structural
response, which was expected given the relatively flexible superstructure and stiff soils.
The potential for financial loss is considerable. Overall, the calculated expected annual
losses (EAL) are in the range of 97,000 for the various code-conforming benchmark
building designs, or roughly 1% of the replacement cost of the building (3.5M, the fatality rate translates to an EAL due to
fatalities of 5,600 for the code-conforming designs, and 66,000, the monetary value associated with life loss is small,
suggesting that the governing factor in this respect will be the maximum permissible life-safety
risk deemed by the public (or its representative government) to be appropriate for buildings.
Although the focus of this report is on one specific building, it can be used as a reference
for other types of structures. This report is organized in such a way that the individual core
chapters (4, 5, and 6) can be read independently. Chapter 1 provides background on the
performance-based earthquake engineering (PBEE) approach. Chapter 2 presents the
implementation of the PBEE methodology of the PEER framework, as applied to the benchmark
building. Chapter 3 sets the stage for the choices of location and basic structural design. The subsequent core chapters focus on the hazard analysis (Chapter 4), the structural analysis
(Chapter 5), and the damage and loss analyses (Chapter 6). Although the report is self-contained,
readers interested in additional details can find them in the appendices
The Effect of Covid-19 Outbreak on Turkish Diesel Consumption Volatility Dynamics
We analyze the effect of the COVID-19 outbreak on volatility dynamics of the Turkish diesel market. We observe that a high volatility pattern starts around mid-April, 2020 and reaches its peak on 24/05/2020. This is due to the government imposed weekend curfews and bans on intercity travels. Two policy suggestions are provided. First is a temporary rearrangement of profit margins of dealers and liquid fuel distributors; and, second is a temporary tax regulation to compensate lost tax revenue
Recommended from our members
Coherent Coupling of Multiple Transverse Modes in Quantum Cascade Lasers
Quantum cascade lasers are a unique laboratory for studying nonlinear laser dynamics because of their high intracavity intensity, strong intersubband optical nonlinearity, and an unusual combination of relaxation time scales. Here we investigate the nonlinear coupling between the transverse modes of quantum cascade lasers. We present evidence for stable phase coherence of multiple transverse modes over a large range of injection currents. We explain the phase coherence by a four-wave mixing interaction originating from the strong optical nonlinearity of the gain transition. The phase-locking conditions predicted by theory are supported by spectral data and both near- and far-field mode measurements.Engineering and Applied Science
The relation of the pleural thickening in tuberculosis pleurisy with the activity of adenosine deaminase
Selvi, A. Kant, S. Arslan, M. Ozgel. Background: Residual pleural thickening (RPT) still occurs in most patients with tuberculosis pleurisy despite advances in the treatment of tuberculosis. The aim of this study was to evaluate the significance of RPT in tuberculosis pleurisy with the patients clinical findings, biochemical and microbiological properties of pleural effusion and with the total adenosine deaminase (ADA) and isoenzymes levels. Methods: 121 tuberculosis pleurisy patients were evaluated retrospectively. According to posteroanterior chest x-rays, the 63 (52%) cases with the thickness 2 mm or more in lower lateral hemithorax were grouped as I and the 58 (48%) cases without pleural thickness were grouped as II. The amount of pleural effusion was classified into small, medium or massive according to their chest x-rays. In both groups; sex, age, symptoms score, bacteriological and biochemical tests and ADA levels were recorded. Results: 81 (67%) male and 40 (33%) female, overall 121 patients were enrolled into the study. RPT was found higher in males (p=0.014) and the increase ran parallel with the amount of cigarette smoking (p=0.014). RPT was found to be lower in small effusions (p=0.001). The group with RPT, the serum albumin was found lower (p=0.002), pleural fluid total protein (p=0.047) and the ratio of pleural fluid protein to serum protein (p=0.002) were found higher. In group I, total ADA: 69.5±38.9 IU/L and ADA2: 41.3±31.6 IU/L were higher than the cases without RPT (p=0.032, p=0.017, respectively). Conclusions: We suggest that the immunological mechanisms are effective in the development of pleural thickening
Multiarticular chronic tophaceous gout with severe and multiple ulcerations: a case report
<p>Abstract</p> <p>Introduction</p> <p>Gout is a common inflammatory arthritis caused by articular precipitation of monosodium urate crystals. It usually affects the first metatarsophalangeal joint of the foot and less commonly other joints, such as wrists, elbows, knees and ankles.</p> <p>Case presentation</p> <p>We report the case of a 75-year-old Caucasian man with tophaceous multiarticular gout, soft-tissue involvement and ulcerated tophi on the first metatarsophalangeal joint of the left foot, on the first interphalangeal joint of the right foot and on the left thumb.</p> <p>Conclusion</p> <p>Ulcers due to tophaceous gout are currently uncommon considering the positive effect of pharmaceutical treatment in controlling hyperuricemia. Surgical treatment is seldom required for gout and is usually reserved for cases of recurrent attacks with deformities, severe pain, infection and joint destruction.</p
Cloud e-learning for mechatronics: CLEM
his paper describes results of the CLEM project, Cloud E-learning for Mechatronics. CLEM is an example of a domain-specific cloud that is especially tuned to the needs of VET (Vocational, Education and Training) teachers. An interesting development has been the creation of remote laboratories in the cloud. Learners can access such laboratories to support their practical learning of mechatronics without the need to set up laboratories at their own institutions. The cloud infrastructure enables multiple laboratories to come together virtually to create an ecosystem for educators and learners. From such a system, educators can pick and mix materials to create suitable courses for their students and the learners can experience different types of devices and laboratories through the cloud. The paper provides an overview of this new cloud-based e-learning approach and presents the results. The paper explains how the use of cloud computing has enabled the development of a new method, showing how a holistic e-learning experience can be obtained through use of static, dynamic and interactive material together with facilities for collaboration and innovation
Ex Situ Left Ventricular Pressure-Volume Loop Analyses for Donor Hearts: Proof of Concept in an Ovine Experimental Model.
Ex situ heart perfusion (ESHP) has emerged as an important strategy to preserve donation after brain death (DBD) and donation after circulatory death (DCD) donor hearts. Clinically, both DBD and DCD hearts are successfully preserved using ESHP. Viability assessment is currently based on biochemical values, while a reliable method for graft function assessment in a physiologic working mode is unavailable. As functional assessment during ESHP has demonstrated the highest predictive value of outcome post-transplantation, this is an important area for improvement. In this study, a novel method for ex situ assessment of left ventricular function with pressure-volume loop analyses is evaluated. Ovine hearts were functionally evaluated during normothermic ESHP with the novel pressure-volume loop system. This system provides an afterload and adjustable preload to the left ventricle. By increasing the preload and measuring end-systolic elastance, the system could successfully assess the left ventricular function. End-systolic elastance at 60 min and 120 min was 2.8 ± 1.8 mmHg/mL and 2.7 ± 0.7 mmHg/mL, respectively. In this study we show a novel method for functional graft assessment with ex situ pressure-loop analyses during ESHP. When further validated, this method for pressure-volume assessments, could be used for better graft selection in both DBD and DCD donor hearts
A field-trial of two restorative materials used with atraumatic restorative treatment in rural Turkey: 24-month results
- …