Non-volatile resistive switching in dielectric superconductor YBCO

We report on the reversible, nonvolatile and polarity dependent resistive switching between superconductor and insulator states at the interfaces of a Au/YBa$_2$Cu$_3$O$_{7-\delta}$ (YBCO)/Au system. We show that the superconducting state of YBCO in regions near the electrodes can be reversibly removed and restored. The possible origin of the switching effect may be the migration of oxygen or metallic ions along the grain boundaries that control the intergrain superconducting coupling. Four-wire bulk resistance measurements reveal that the migration is not restricted to interfaces and produce significant bulk effects.Comment: 4 pages, 4 figures, corresponding author: C. Acha ([email protected]

Banks and Economic Growth in Nigeria

The study examines the contribution of banks in Nigeria to the growth of the economy. It used bank savings mobilization and credit to the real sector as proxy for banks contribution while gross domestic product growth rate proxies’ economic growth. Before correlation analysis and regression were used to test hypothesis, diagnostic tests were carried out on the variables to ensure stationarity and examine the cointegration properties of the model. Augmented Dickey-Fuller test was used to test stationarity while Trace statistic and Eigenvalue test were used to assess cointegration. Results show an insignificant impact of banks intermediation variables on economic growth. The study therefore concludes that the poor performance of these variables indicate that other variables such as human resources, social infrastructure, political stability and technology may play more robust role in economic growth in Nigeria than banks. In the light of this, urgent improvement in social infrastructure especially power supply and reversal of the decline in education were recommended

First-Order Insulator-to-Metal Mott Transition in the Paramagnetic 3D System GaTa4Se8

The nature of the Mott transition in the absence of any symmetry braking remains a matter of debate. We study the correlation-driven insulator-to-metal transition in the prototypical 3D Mott system GaTa4Se8, as a function of temperature and applied pressure. We report novel experiments on single crystals, which demonstrate that the transition is of first order and follows from the coexistence of two states, one insulating and one metallic, that we toggle with a small bias current. We provide support for our findings by contrasting the experimental data with calculations that combine local density approximation with dynamical mean-field theory, which are in very good agreement.Comment: 5 pages and 4 figures. Supplemental material: 2 pages, 2 figure

Reclutamiento de juveniles de peces a una pequeña laguna semi-obturada de clima templado (Argentina) y la influencia de factores ambientales durante el proceso

Juvenile fishes were sampled every 15 days from September 2009 to April 2010 along the marine-estuarine gradient (surf zone, estuary and a freshwater stream) of the Mar Chiquita lagoon, Argentina. The temporal variations of juvenile assemblages in spring-summer and the environmental variables related to the spatial and temporal patterns were analysed. Four groups of sampling stations were defined, indicating differences in fish composition among zones during the spring–early summer period (Groups I to III), while the composition of juvenile fishes was homogeneous along the marine-estuarine gradient during the late summer–early autumn period (Group IV). Platanichthys platana and Ramnogaster arcuata (Group A) and Odontesthes argentinensis and Brevoortia aureaz (Group B) contributed most to the temporal differences observed. The three first species reached this estuarine system in spring, although with lower abundances than in early summer, while B. aurea was dominant in late summer–early autumn, showing different periods of recruitment of these species into the lagoon. After factoring out variation due to shared spatial-temporal-environmental factors (4.43%), canonical correspondence analysis (CCA) showed that temporal factors had an almost five times greater contribution (15.15%) than spatial factors (2.85%) and almost twice as great as the pure environmental factors (8.11%) to explaining the variation in abundance of the juvenile fishes. From the significant environmental variables incorporated in the CCA, wind direction contributed more than water temperature, salinity or transparency in explaining data variability. Indeed, most species were related to “onshore winds” and therefore the importance of wind in the successful recruitment of juveniles into this shallow and micro-tidal estuary is discussed.Los juveniles de peces se recolectaron cada 15 días desde septiembre de 2009 a abril de 2010 a lo largo de un gradiente marino-estuarino (en una zona de rompiente, estuario y un arroyo de agua dulce) de la laguna costera Mar Chiquita (Argentina). Se analizaron las variaciones temporales de las asociaciones de juveniles durante el periodo primavera-verano y las variables ambientales que estuvieron relacionadas con los patrones espaciales y temporales. Fueron definidos cuatro grupos de estaciones de muestreo indicando diferencias en la composición de peces entre zonas durante el período de primavera-verano temprano (grupos I a III), mientras que la composición de peces juveniles fue homogénea a lo largo del gradiente marino-estuarino durante el período de verano tardío-otoño temprano (grupo IV). Platanichthys platana y Ramnogaster arcuata (Grupo A), y Odontesthes argentinensis y Brevoortia aurea (Grupo B) fueron las especies que más contribuyeron a las diferencias temporales observadas. Las tres primeras especies llegaron a este sistema estuarino durante la primavera, aunque con menor abundancia en relación a la registrada en verano temprano, mientras que B. aurea fue dominante durante el verano tardío-otoño temprano, mostrando períodos de reclutamiento a la laguna distintos. Después de factorizar la variación compartida entre el factor espacial, el temporal y las variables ambientales (4.43%), el análisis de correspondencia canónica (CCA) mostró que el componente temporal tuvo una contribución casi 5 veces mayor (15.15%) a la del componente espacial (2.85%), y casi el doble a la de los factores puramente ambientales (8.11%) para explicar la variación en la abundancia de los juveniles de peces. De las variables ambientales significativas que fueron incorporadas en el CCA, la dirección del viento contribuyó más que la temperatura, la salinidad o la transparencia del agua en explicar la variabilidad de los datos. De hecho, la mayoría de las especies estuvieron relacionadas con los “vientos marinos” y, por lo tanto, se discute la importancia del viento en el éxito del reclutamiento de juveniles de peces a este estuario poco profundo y de régimen micro-mareal

The Carbon Footprint of a UK Chemical Engineering Department – The Case of Imperial College London

As the UK strives towards net-zero it is important that all sectors, including Higher Education, take immediate measures to cut their greenhouse gas emissions. The greenhouse gases emitted by different Higher Education institutions are studied and are shown to be large. However, these studies are based on aggregated data, and it is therefore uncertain how effective institute-wide policies to cut emissions are at department level. Herein, we present a generic framework for university departments to calculate their carbon footprint considering Scope 1, 2 and 3 emissions. We estimate the carbon footprint of the Chemical Engineering Department at Imperial College London to be 7,620 and 8,330 tCO2eq in 2018/19 and 2019/20, respectively. Scope 3 emissions account for 54% of the Department's emissions with Scope 1 and 2 accounting for the remaining 46%. Scope 3 emissions are largely driven by purchased goods and travel, while Scope 1 emissions are predominantly from electricity usage

Integral recycling of end-of-life fibre reinforced epoxy and polyester plastic waste: thermal upgrading of pyrolysis oils

Please click Additional Files below to see the full abstrac

Influence of feedstock particle size on the determination of pollutants in pyrolysis oils

Please click Additional Files below to see the full abstrac

Performance of the Two Aerogel Cherenkov Detectors of the JLab Hall A Hadron Spectrometer

We report on the design and commissioning of two silica aerogel Cherenkov detectors with different refractive indices. In particular, extraordinary performance in terms of the number of detected photoelectrons was achieved through an appropriate choice of PMT type and reflector, along with some design considerations. After four years of operation, the number of detected photoelectrons was found to be noticeably reduced in both detectors as a result of contamination, yellowing, of the aerogel material. Along with the details of the set-up, we illustrate the characteristics of the detectors during different time periods and the probable causes of the contamination. In particular we show that the replacement of the contaminated aerogel and parts of the reflecting material has almost restored the initial performance of the detectors.Comment: 18 pages, 9 Figures, 4 Tables, 44 Reference

PLA/WOOD BIOCOMPOSITES: IMPROVING COMPOSITE STRENGTH BY CHEMICAL TREATMENT OF THE FIBERS

A resol type phenolic resin was prepared for the impregnation of wood particles used for the reinforcement of PLA. A preliminary study showed that the resin penetrates wood with rates depending on the concentration of the solution and on temperature. Treatment with a solution of 1 wt% resin resulted in a considerable increase of composite strength and decrease of water absorption. Composite strength improved as a result of increased inherent strength of the wood, but interfacial adhesion might be modified as well. When wood was treated with resin solutions of larger concentrations, the strength of the composites decreased, first slightly, then drastically to a very small value. A larger amount of resin results in a thick coating on wood with inferior mechanical properties. At large resin contents the mechanism of deformation changes; the thick coating breaks very easily leading to the catastrophic failure of the composites at very small loads