Increased intraspecies diversity in Escherichia coli biofilms promotes cellular growth at the expense of matrix production

Intraspecies diversity in biofilm communities is associated with enhanced survival and growth of the individual biofilm populations. Studies on the subject are scarce, namely, when more than three strains are present. Hence, in this study, the influence of intraspecies diversity in biofilm populations composed of up to six different Escherichia coli strains isolated from urine was evaluated in conditions mimicking the ones observed in urinary tract infections and catheter-associated urinary tract infections. In general, with the increasing number of strains in a biofilm, an increase in cell cultivability and a decrease in matrix production were observed. For instance, single-strain biofilms produced an average of 73.1 µg·cm-2 of extracellular polymeric substances (EPS), while six strains biofilms produced 19.9 µg·cm-2. Hence, it appears that increased genotypic diversity in a biofilm leads E. coli to direct energy towards the production of its offspring, in detriment of the production of public goods (i.e., matrix components). Apart from ecological implications, these results can be explored as another strategy to reduce the biofilm burden, as a decrease in EPS matrix production may render these intraspecies biofilms more sensitive to antimicrobial agents.This work was financially supported by Base Funding—UIDB/00511/2020 of the Laboratory for Process Engineering, Environment, Biotechnology and Energy—LEPABE—funded by national funds through the FCT/MCTES (PIDDAC); Project POCI-01-0145-FEDER-030431 (CLASInVivo) and project POCI-01-0145-FEDER-029841 (POLY-PREVENTT), funded by FEDER funds through COMPETE2020—Programa Operacional Competitividade e Internacionalização (POCI) and by national funds (PIDDAC) through FCT/MCTES; Strategic funding of UIDB/04469/2020 of the Centre of Biological Engineering–CEB–funded by national funds through the FCT; Project BeMundus Brazil Europe/Erasmus Mundus scholarship granted by BM13DF0014

Water-induced modulation of Helicobacter pylori virulence properties

While the influence of water in Helicobacter pylori culturability and membrane integrity has been extensively studied, there are little data concerning the effect of this environment on virulence properties. Therefore, we studied the culturability of water-exposed H. pylori and determined whether there was any relation with the bacterium’s ability to adhere, produce functional components of pathogenicity and induce inflammation and alterations in apoptosis in an experimental model of human gastric epithelial cells. H. pylori partially retained the ability to adhere to epithelial cells even after complete loss of culturability. However, the microorganism is no longer effective in eliciting in vitro host cell inflammation and apoptosis, possibly due to the non-functionality of the cag type IV secretion system. These H. pylori-induced host cell responses, which are lost along with culturability, are known to increase epithelial cell turnover and, consequently, could have a deleterious effect on the initial H. pylori colonisation process. The fact that adhesion is maintained by H. pylori to the detriment of other factors involved in later infection stages appears to point to a modulation of the physiology of the pathogen after water exposure and might provide the microorganism with the necessary means to, at least transiently, colonise the human stomach.FCT (SFRH/BD/24579/2005) (to NMG

Critical analysis of methods to determine growth, control and analysis of biofilms for potential non-submerged antibiofilm surfaces and coatings

The potential uses for antibiofilm surfaces reach across different sectors with significant resultant economic, societal and health impact. For those interested in using antibiofilm surfaces in the built environment, it is important that efficacy testing methods are relevant, reproducible and standardised where possible, to ensure data outputs are applicable to end-use, and comparable across the literature. Using pre-defined keywords, a review of literature reporting on antimicrobial surfaces (78 articles), within which a potential application was described as non-submerged/non-medical surface or coating with antibiofilm action, was undertaken. The most used methods utilized the growth of biofilm in submerged and static systems. Quantification varied (from most to least commonly used) across colony forming unit counts, non-microscopy fluorescence or spectroscopy, microscopy analysis, direct agar-contact, sequencing, and ELISA. Selection of growth media, microbial species, and incubation temperature also varied. In many cases, definitions of biofilm and attempts to quantify antibiofilm activity were absent or vague. Assessing a surface after biofilm recovery or assessing potential regrowth of a biofilm after initial analysis was almost entirely absent. It is clear the field would benefit from widely agreed and adopted approaches or guidance on how to select and incorporate end-use specific conditions, alongside minimum reporting guidelines may benefit the literature

BiofOmics: A Web Platform for the Systematic and Standardized Collection of High-Throughput Biofilm Data

Background: Consortia of microorganisms, commonly known as biofilms, are attracting much attention from the scientific community due to their impact in human activity. As biofilm research grows to be a data-intensive discipline, the need for suitable bioinformatics approaches becomes compelling to manage and validate individual experiments, and also execute inter-laboratory large-scale comparisons. However, biofilm data is widespread across ad hoc, non-standardized individual files and, thus, data interchange among researchers, or any attempt of cross-laboratory experimentation or analysis, is hardly possible or even attempted. Methodology/Principal findings This paper presents BiofOmics, the first publicly accessible Web platform specialized in the management and analysis of data derived from biofilm high-throughput studies. The aim is to promote data interchange across laboratories, implementing collaborative experiments, and enable the development of bioinformatics tools in support of the processing and analysis of the increasing volumes of experimental biofilm data that are being generated. BiofOmics data deposition facility enforces data structuring and standardization, supported by controlled vocabulary. Researchers are responsible for the description of the experiments, their results and conclusions. BiofOmics curators interact with submitters only to enforce data structuring and the use of controlled vocabulary. Then, BiofOmics search facility makes publicly available the profile and data associated with a submitted study so that any researcher can profit from these standardization efforts to compare similar studies, generate new hypotheses to be tested or even extend the conditions experimented in the study. Significance BiofOmics novelty lays on its support to standardized data deposition, the availability of computerizable data files and the free-of-charge dissemination of biofilm studies across the community. Hopefully, this will open promising research possibilities, namely: the comparison of results between different laboratories, the reproducibility of methods within and between laboratories, and the development of guidelines and standardized protocols for biofilm formation devices and analytical methods.The financial support from the Institute of Biotechnology and Bioengineering - Center of Biological Engineering (IBB-CEB), Fundacao para a Ciencia e Tecnologia (FCT) and European Community fund FEDER (Program COMPETE), project PTDC/SAU-ESA/646091/2006/FCOMP-01-0124-FEDER-007480 and PhD grant of Idalina Machado (SFRH/BD/31065/2006) are gratefully acknowledged. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

Validation of a fluorescence in situ hybridization method using peptide nucleic acid probes for detection of helicobacter pylori clarithromycin resistance in gastric biopsy specimens

Here, we evaluated a previously established peptide nucleic acid-fluorescence in situ hybridization (PNA-FISH) method as a new diagnostic test for Helicobacter pylori clarithromycin resistance detection in paraffin-embedded gastric biopsy specimens. Both a retrospective study and a prospective cohort study were conducted to evaluate the specificity and sensitivity of a PNA-FISH method to determine H. pylori clarithromycin resistance. In the retrospective study (n 30 patients), full agreement between PNA-FISH and PCR-sequencing was observed. Compared to the reference method (culture followed by Etest), the specificity and sensitivity of PNA-FISH were 90.9% (95% confidence interval [CI], 57.1% to 99.5%) and 84.2% (95% CI, 59.5% to 95.8%), respectively. In the prospective cohort (n 93 patients), 21 cases were positive by culture. For the patients harboring clarithromycin- resistant H. pylori, the method showed sensitivity of 80.0% (95% CI, 29.9% to 98.9%) and specificity of 93.8% (95% CI, 67.7% to 99.7%). These values likely represent underestimations, as some of the discrepant results corresponded to patients infected by more than one strain. PNA-FISH appears to be a simple, quick, and accurate method for detecting H. pylori clarithromycin resistance in paraffin-embedded biopsy specimens. It is also the only one of the methods assessed here that allows direct and specific visualization of this microorganism within the biopsy specimens, a characteristic that allowed the observation that cells of different H. pylori strains can subsist in very close proximity in the stomach

Proposal for a method to estimate nutrient shock effects in bacteria

Plating methods are still the golden standard in microbiology; however, some studies have shown that these techniques can underestimate the microbial concentrations and diversity. A nutrient shock is one of the mechanisms proposed to explain this phenomenon. In this study, a tentative method to assess nutrient shock effects was tested. Findings To estimate the extent of nutrient shock effects, two strains isolated from tap water (Sphingomonas capsulata and Methylobacterium sp.) and two culture collection strains (E. coli CECT 434 and Pseudomonas fluorescens ATCC 13525) were exposed both to low and high nutrient conditions for different times and then placed in low nutrient medium (R2A) and rich nutrient medium (TSA). The average improvement (A.I.) of recovery between R2A and TSA for the different times was calculated to more simply assess the difference obtained in culturability between each medium. As expected, A.I. was higher when cells were plated after the exposition to water than when they were recovered from high-nutrient medium showing the existence of a nutrient shock for the diverse bacteria used. S. capsulata was the species most affected by this phenomenon. This work provides a method to consistently determine the extent of nutrient shock effects on different microorganisms and hence quantify the ability of each species to deal with sudden increases in substrate concentration. <br/

Discriminating multi-species populations in biofilms with peptide nucleic acid fluorescence in situ hybridization (PNA FISH)

Background: ur current understanding of biofilms indicates that these structures are typically composed of many different microbial species. However, the lack of reliable techniques for the discrimination of each population has meant that studies focusing on multi-species biofilms are scarce and typically generate qualitative rather than quantitative data.Methodology/principal findings: we employ peptide nucleic acid fluorescence in situ hybridization (PNA FISH) methods to quantify and visualize mixed biofilm populations. As a case study, we present the characterization of Salmonella enterica/Listeria monocytogenes/Escherichia coli single, dual and tri-species biofilms in seven different support materials. Ex-situ, we were able to monitor quantitatively the populations of ~56 mixed species biofilms up to 48 h, regardless of the support material. In situ, a correct quantification remained more elusive, but a qualitative understanding of biofilm structure and composition is clearly possible by confocal laser scanning microscopy (CLSM) at least up to 192 h. Combining the data obtained from PNA FISH/CLSM with data from other established techniques and from calculated microbial parameters, we were able to develop a model for this tri-species biofilm. The higher growth rate and exopolymer production ability of E. coli probably led this microorganism to outcompete the other two [average cell numbers (cells/cm2) for 48 h biofilm: E. coli 2,1×108 (±2,4×107); L. monocytogenes 6,8×107 (±9,4×106); and S. enterica 1,4×106 (±4,1×105)]. This overgrowth was confirmed by CSLM, with two well-defined layers being easily identified: the top one with E. coli, and the bottom one with mixed regions of L. monocytogenes and S. enterica.Significance: while PNA FISH has been described previously for the qualitative study of biofilm populations, the present investigation demonstrates that it can also be used for the accurate quantification and spatial distribution of species in polymicrobial communities. Thus, it facilitates the understanding of interspecies interactions and how these are affected by changes in the surrounding environmen

Critical review on biofilm methods

Biofilms are widespread in nature and constitute an important strategy implemented by microorganisms to survive in sometimes harsh environmental conditions. They can be beneficial or have a negative impact particularly when formed in industrial settings or on medical devices. As such, research into the formation and elimination of biofilms is important for many disciplines. Several new methodologies have been recently developed for, or adapted to, biofilm studies that have contributed to deeper knowledge on biofilm physiology, structure and composition. In this review, traditional and cutting-edge methods to study biofilm biomass, viability, structure, composition and physiology are addressed. Moreover, as there is a lack of consensus among the diversity of techniques used to grow and study biofilms. This review intends to remedy this, by giving a critical perspective, highlighting the advantages and limitations of several methods. Accordingly, this review aims at helping scientists in finding the most appropriate and up-to-date methods to study their biofilms.The authors would like to acknowledge the support from the EU COST Action BacFoodNet FA1202