The relationship between cumulative low back loads and heart rate determined physical activity level during non-occupational tasks.

The aim of this study was to quantify the relationship between heart rate determined physical activity levels (HR-PAL), and estimates of cumulative low back loads estimated from video records of non-occupational activities. Subjects were videotaped while performing self-determined, non-occupational activities within their own homes, for a period of 2 hours. Subject HR was continuously recorded during the data collection period. The 2-hour HR profile, along with subjects\u27 height, mass, age, gender, and median sitting HR, were used as inputs into a regression-based mathematical model to estimate HR-PAL. The video data were captured to digital format at 3 samples/sec; the video was trimmed to match the heart rate file, and each task was then trimmed out into separate video image clips. The video clips were analyzed with the 3-D Match video analysis tool. At an alpha level of 0.05, quadratic regression equations were able to account for a significant amount of variance in cumulative compression force (R2 = 0.817), cumulative flexion moment (R2 = 0.757), and cumulative right axial twist moment (R2 = 0.769). (Abstract shortened by UMI.) Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .A93. Source: Masters Abstracts International, Volume: 43-01, page: 0204. Adviser: David Andrews. Thesis (M.H.K.)--University of Windsor (Canada), 2004

Comparative study of bolometric and non-bolometric switching elements for microwave phase shifters

The performance of semiconductor and high critical temperature superconductor switches is compared as they are used in delay-line-type microwave and millimeter-wave phase shifters. Such factors as their ratios of the off-to-on resistances, parasitic reactances, power consumption, speed, input-to-output isolation, ease of fabrication, and physical dimensions are compared. Owing to their almost infinite off-to-on resistance ratio and excellent input-to-output isolation, bolometric superconducting switches appear to be quite suitable for use in microwave phase shifters; their only drawbacks are their speed and size. The SUPERFET, a novel device whose operation is based on the electric field effect in high critical temperature ceramic superconductors is also discussed. Preliminary results indicate that the SUPERFET is fast and that it can be scaled; therefore, it can be fabricated with dimensions comparable to semiconductor field-effect transistors

Effects of dietary L-arginine on orthodontic tooth movement in rats

The purpose of this study was to investigate the effects of dietary L-arginine as nitric oxide (NO) precursor on orthodontic tooth movement in rats. 36 male ten-week old Wistar rats were randomly divided into experimental and control groups. The experimental group received 2% (w/w) dietary Larginine in drinking water six days before the insertion of springs to elevate their blood level. On the seventh day, in both groups, maxillary incisors was moved by the insertion of springs and 12 days after insertion of springs, the rats were sacrificed, then the mesioincisal distance between maxillary incisors was measured. Afterwards, 12 and six rats from both groups were selected randomly for preparing histological section to count osteoclasts under a light microscope and for examining the surface area of root resorption lacunae under a scanning electron microscope, respectively. The data on the extent of orthodontic tooth movement and the number of osteoclasts were analyzed by independent sample t test and findings on root resorption were analyzed by using Mann-Whitney U test. The results showed that in L-arginine group, the orthodontic tooth movement (p < 0.001) and the number of osteoclasts (p < 0.05) were significantly higher when compared with the control grou. However, there was no significant difference between the two groups in terms of the surface area of resorption lacunae.Key words: L-Arginine, dietary, orthodontic tooth movement, nitric oxide, root resorption, osteoclast, nitric oxide synthase (NOS)

Evidence of a Double Pulse Muscle Activation Strategy in Drummers’ Trunk and Upper Limb Muscles During High-velocity Cymbal Crashes

Background: Playing the drum kit is a physically and cognitively demanding task, and skilled drummers share many such attributes with elite athletes. The ‘double pulse’ muscle activation (DPMA) pattern is a motor control strategy that has been observed in athletes of sports involving ballistic movements (e.g., baseball, golf, Mixed Martial Arts), and is believed to function to increase force transfer to the target. Objective: This study examined the muscle activation patterns of highly skilled drummers for evidence of a DPMA during high-velocity cymbal crashes. Methods: Five drummers were instrumented with electromyography electrodes on the right latissimus dorsi, triceps brachii, erector spinae, rectus abdominis, deltoideus posterior (DP), teres major, extensor carpi radialis, and flexor carpi ulnaris muscles. Six trials of data were collected, including a resting baseline, three maximum voluntary exertions (MVE) consisting of maximal effort cymbal crashes, a drumming pattern that included multiple crashes, and a ‘free-play’ trial. Results: The DPMA waveform was observed in all trials, but only those observed during the MVE trials were confirmed to coincide with the crashing movement via video analysis. The DP muscle – which functions to extend the shoulder joint to crash the stick on to the cymbal – exhibited confirmed DPMAs the most frequently. Conclusion: The extent to which drummers use the DPMA to produce high-velocity cymbal crashes within authentic playing conditions is inconclusive and needs further examination. Future study of the DPMA phenomenon in drummers would benefit from the addition of 3-dimensional motion capture to further understand the purpose of the muscle contractions of the DPMA

Modeling of a Cantilever-Based Near-Field Scanning Microwave Microscope

We present a detailed modeling and characterization of our scalable microwave nanoprobe, which is a micro-fabricated cantilever-based scanning microwave probe with separated excitation and sensing electrodes. Using finite-element analysis, the tip-sample interaction is modeled as small impedance changes between the tip electrode and the ground at our working frequencies near 1GHz. The equivalent lumped elements of the cantilever can be determined by transmission line simulation of the matching network, which routes the cantilever signals to 50 Ohm feed lines. In the microwave electronics, the background common-mode signal is cancelled before the amplifier stage so that high sensitivity (below 1 atto-Farad capacitance changes) is obtained. Experimental characterization of the microwave probes was performed on ion-implanted Si wafers and patterned semiconductor samples. Pure electrical or topographical signals can be realized using different reflection modes of the probe.Comment: 7 figure

Online Makespan Minimization with Parallel Schedules

In online makespan minimization a sequence of jobs $\sigma = J_1,..., J_n$ has to be scheduled on $m$ identical parallel machines so as to minimize the maximum completion time of any job. We investigate the problem with an essentially new model of resource augmentation. Here, an online algorithm is allowed to build several schedules in parallel while processing $\sigma$. At the end of the scheduling process the best schedule is selected. This model can be viewed as providing an online algorithm with extra space, which is invested to maintain multiple solutions. The setting is of particular interest in parallel processing environments where each processor can maintain a single or a small set of solutions. We develop a (4/3+\eps)-competitive algorithm, for any 0<\eps\leq 1, that uses a number of 1/\eps^{O(\log (1/\eps))} schedules. We also give a (1+\eps)-competitive algorithm, for any 0<\eps\leq 1, that builds a polynomial number of (m/\eps)^{O(\log (1/\eps) / \eps)} schedules. This value depends on $m$ but is independent of the input $\sigma$. The performance guarantees are nearly best possible. We show that any algorithm that achieves a competitiveness smaller than 4/3 must construct $\Omega(m)$ schedules. Our algorithms make use of novel guessing schemes that (1) predict the optimum makespan of a job sequence $\sigma$ to within a factor of 1+\eps and (2) guess the job processing times and their frequencies in $\sigma$. In (2) we have to sparsify the universe of all guesses so as to reduce the number of schedules to a constant. The competitive ratios achieved using parallel schedules are considerably smaller than those in the standard problem without resource augmentation

On-line load balancing

AbstractThe setup for our problem consists of n servers that must complete a set of tasks. Each task can be handled only by a subset of the servers, requires a different level of service, and once assigned cannot be reassigned. We make the natural assumption that the level of service is known at arrival time, but that the duration of service is not. The on-line load balancing problem is to assign each task to an appropriate server in such a way that the maximum load on the servers is minimized. In this paper we derive matching upper and lower bounds for the competitive ratio of the on-line greedy algorithm for this problem, namely, [(3n)23/2](1+o(1)), and derive a lower bound, Ω(n12), for any other deterministic or randomized on-line algorithm

Resource augmentation in load balancing

We consider load-balancing in the following setting. The on-line algorithm is allowed to use $n$ machines, whereas the optimal off-line algorithm is limited to $m$ machines, for some fixed $m < n$. We show that while the greedy algorithm has a competitive ratio which decays linearly in the inverse of $n/m$, the best on-line algorithm has a ratio which decays exponentially in $n/m$. Specifically, we give an algorithm with competitive ratio of 1+2^{- frac{n{m (1- o (1)), and a lower bound of 1+ e^{ - frac{n{m (1+ o(1)) on the competitive ratio of any randomized algorithm. We also consider the preemptive case. We show an on-line algorithm with a competitive ratio of 1+ e^{ - frac{n{m (1+ o(1)). We show that the algorithm is optimal by proving a matching lower bound. We also consider the non-preemptive model with temporary tasks. We prove that for $n=m+1$, the greedy algorithm is optimal. (It is not optimal for permanent tasks.

Extended Spectrum Beta-Lactamase Carriage State among Elderly Nursing Home Residents in Beirut

Introduction. ESBL-producing Enterobacteriaceae can cause severe infections, but they are also isolated from the stool of asymptomatic subjects. Faecal carriage of such organism is poorly understood. Methods. First phase of the study was cross-sectional with prevalence and epidemiology of ESBL faecal carriage in two nursing homes in Beirut: 57 residents in the first (NH1) and 151 residents in the second (NH2). In second phase, faecal swabs from cohort of NH1 residents were examined for carriage at six-week intervals over three-month period. Residents’ charts were reviewed to assess carriage risk factors. Results. Over 3 consecutive samplings at NH1, 81% of residents were at least one-time carriers with 50% at the first round, 60.4% at the second, and 74.5% at the last one. At NH2, 68.2% of residents were carriers. Constipation (in NH1) and antibiotic intake (in NH2) were significantly associated with higher ESBL faecal carriage while the length of stay at the nursing home (in NH2) was associated with less carriage. Conclusion. Faecal carriage of ESBL-producing Enterobacteriaceae is high among nursing home patients in Beirut. The rate of carriage changes rapidly and significantly over time either with multiple factors playing a possible role like outbreak spreading, antibiotic, and health care system exposure