3,679 research outputs found
An experimental investigation of the flow past a finite circular cylinder at a low subcritical Reynolds number
Results of hot wire measurements made in the near wake at a Reynolds number of 9955 are reported. The measurements include the mean velocity profiles, root mean square values of the velocity fluctuations, frequency spectra, and velocity cross correlations. The mean velocity profiles were used to determine the wake width, whose variation in the downstream and spanwise directions was examined. It is observed that close to the cylinder, the wake is narrower toward the free end than it is away from it, while further downstream the wake is wider toward the tip than it is away from it. It is found that the flow over the span can be characterized by four regions: a tip region where vortex shedding occurs at a lower frequency than that prevalent for away from the tip; an intermediate region adjacent to the first one where a frequency component of a nonshedding character is present; a third region characterized by a gradually increasing shedding frequency with increasing distance from the tip; and a two dimensional region where the shedding frequency is constant
Recommended from our members
Finite element model for predicting the shear behavior of FRP-strengthened RC members
The shear behavior of FRP strengthened reinforced concrete (FRP strengthened RC) membrane elements can be predicted by developing logical models that satisfy the principles of mechanics of materials namely stress equilibrium, strain compatibility, and constitutive relationships of concrete, steel and, FRP reinforcements. The Softened Membrane Model (SMM), which was developed for predicting the shear behavior of reinforced concrete (RC) membrane elements, is extended to FRP strengthened RC members subjected to shear. This new analytical model, referred to as the Softened Membrane Model for FRP strengthened RC members (SMM-FRP), considers new constitutive laws for each material component of the member. Similar to the case of the SMM model for RC, this new SMM-FRP model can predict the entire stress-strain curve, including pre- and post-cracking, and the ascending and descending branches. The SMM-FRP is implemented into an OpenSees-based finite element program for a membrane 2-D element that will allow structural engineers to predict the monotonic responses of FRP strengthened RC members subjected to shear. The developed program is validated in this paper by the prediction of the monotonic responses of 10 FRP strengthened RC panels subjected to pure shear stresses. The good agreement between the experimental and analytical results confirms the validity of the analytical model in predicting the shear behavior of RC members strengthened with FRP sheets
Blueprint for a high-performance biomaterial: full-length spider dragline silk genes.
Spider dragline (major ampullate) silk outperforms virtually all other natural and manmade materials in terms of tensile strength and toughness. For this reason, the mass-production of artificial spider silks through transgenic technologies has been a major goal of biomimetics research. Although all known arthropod silk proteins are extremely large (>200 kiloDaltons), recombinant spider silks have been designed from short and incomplete cDNAs, the only available sequences. Here we describe the first full-length spider silk gene sequences and their flanking regions. These genes encode the MaSp1 and MaSp2 proteins that compose the black widow's high-performance dragline silk. Each gene includes a single enormous exon (>9000 base pairs) that translates into a highly repetitive polypeptide. Patterns of variation among sequence repeats at the amino acid and nucleotide levels indicate that the interaction of selection, intergenic recombination, and intragenic recombination governs the evolution of these highly unusual, modular proteins. Phylogenetic footprinting revealed putative regulatory elements in non-coding flanking sequences. Conservation of both upstream and downstream flanking sequences was especially striking between the two paralogous black widow major ampullate silk genes. Because these genes are co-expressed within the same silk gland, there may have been selection for similarity in regulatory regions. Our new data provide complete templates for synthesis of recombinant silk proteins that significantly improve the degree to which artificial silks mimic natural spider dragline fibers
Recommended from our members
Softening Coefficient of Reinforced Concrete Elements Subjected to Three-Dimensional Loads
Reinforced concrete structures are prone to fail under the effect of complex threedimensional loading conditions. Accurate constitutive models for concrete under the effect of triaxial stresses are therefore necessary in order to predict the proper response. Strong interaction between in-plane and out of plane shear loads has been observed in experimental tests of concrete structures. This paper presents the derivation of concrete constitutive laws under the effect of triaxial stresses, in particular the softening coefficient, using the results of large-scale tests on representative concrete panels. The experimental program of 7 full-scale panel specimens is briefly described, and the results are then used to derive analytical expressions for the softening coefficient under the effect of bi-directional shear. Finally, existing membrane shear theories are modified to take into consideration the effect of applied out-of-plane shear. The response of the tested panels proved to be accurately predicted using the new theory
Recommended from our members
Behavior of Reinforced Concrete Membrane Elements Subjected to Bidirectional Shear Loads
The shear design and behavior of a typical membrane reinforced concrete (RC) element has been extensively studied in the past several decades. Such design requires knowledge of the constitutive behavior of RC elements subjected to a shear stress acting along its plane (in-plane shear). These constitutive models were accurately derived from experimental test data on representative RC panel elements. The true behavior of many large, complex structures, however, involves interaction between the in-plane and out-of-plane shear stresses acting on the RC element. To investigate this interaction, large-scale tests on representative concrete panels need to be conducted. The University of Houston is equipped with a unique universal panel testing machine that was used for this purpose. The panel tester enhanced the understanding of the in-plane shear behavior of RC elements. Recently, 10 additional hydraulic jacks were mounted in the out-of-plane direction of the universal panel tester to facilitate testing of concrete elements subjected to bidirectional and tridirectional shear stresses. The experimental program included designing, fabricating, instrumenting, and testing full-scale RC elements. The elements were subjected to different combinations of in-plane and out-of-plane shear loads. A strong interaction between in-plane shear strength and out-of-plane shear stresses was observed
The six-functor formalism for rigid analytic motives
We offer a systematic study of rigid analytic motives over general rigid analytic spaces, and we develop their six-functor formalism. A key ingredient is an extended proper base change theorem that we are able to justify by reducing to the case of algebraic motives. In fact, more generally, we develop a powerful technique for reducing questions about rigid analytic motives to questions about algebraic motives, which is likely to be useful in other contexts as well. We pay special attention to establishing our results without noetherianity assumptions on rigid analytic spaces. This is indeed possible using Raynaud's approach to rigid analytic geometry
Acute entanglement and Photon/Phonons statistics in a balanced/unbalanced PT-symmetry systems
We study the significance of Photon/Phonons bunching and antibunching on the
dynamics of the quantum entanglement in the presence of coupled PT-symmetry
systems with balanced/unbalanced gain and loss. We suggest a hybrid
electromechanical system to realize a strong and tunable coupling between a
Coplanar-Waveguide (CPW) microwave cavity and a nanomechanical resonator (NAMR)
via a superconducting Transmon qubit. The hybrid electromechanical system
consists of a non-hermitian Hamiltonian with balanced/unbalanced gain and loss.
The interplay between the quantum entanglement and the -symmetry systems is
also thoroughly investigated. We frame a connection between Number operators,
Photon/Phonons antibunching, and entanglement. It has been observed that the
relative Photon/Phonons numbers play a key role in quantum entanglement
dynamics. Furthermore, we study that quantum entanglement can be characterized
by defining a Photon/Phonons antibunching. The Photon/Phonons antibunching is
strongly dependent on the initial squeezed state and the rate of
balanced/unbalanced gain and loss of the system
Recommended from our members
Explicit fiber beam-column elements for impact analysis of structures
The solution of impact problems requires advanced computational techniques to overcome the difficulties associated with large short-duration loads. In this case, the explicit time integration method is typically used, since it provides a stable solution for problems such as the analysis of structures subjected to shock and impact loads. However, most explicit-based finite elements were developed for continuum models such as membrane and solid elements, which renders the problem computationally expensive. On the other hand, the development of fiber-based beam finite elements allows for the simulation of the global structural behavior with very few degrees of freedoms, while accounting for the detailed material nonlinearity along the element length. However, explicit-based fiber beam elements have not been properly formulated, in particular for the case of the emerging force-based beam element. In this paper, two developed fiber plane beam elements that consider an explicit time integration scheme for the solution of the dynamic equation of motion are presented. The first element uses a displacement-based formulation, while the second element uses a force-based formulation. For the latter case, a new algorithm that eliminates the need for iterations at the element level is proposed. The developed elements require the use of a lumped mass matrix and a small time increment to ensure numerical stability. No iterations or convergence checks are required, which renders the problem numerically efficient. The developed explicit fiber beam-column models, particularly the force-based element, represents a simple yet powerful tool for simulating the nonlinear complex effect of impact loads on structures accurately while using very few finite elements. The traditional implicit method of analysis typically fails to provide numerical stable behavior for such short time duration problems. Two correlation studies are presented to highlight the efficiency of the developed elements in modelling impact problems where the strain rate effect is considered in the material models. These examples confirm the accuracy and efficiency of the presented elements
Recommended from our members
Behavior of FRP-strengthened RC elements subjected to pure shear
The shear behavior of fiber reinforced polymer strengthened reinforced concrete (FRP-strengthened RC) has been the focus of extensive research studies. However, the mechanism of this complex phenomenon has not been fully clarified. Recent analytical models which were developed for predicting the shear capacity of FRP strengthened RC girders were based on test results of simply supported beam specimens with various shear span-to-depth (a/d) ratios. In such tests no region of the specimen is subjected to uniform stress conditions, Therefore, the results of such tests cannot predict the true pure shear behavior due to non-uniformity of stresses, the presence of flexural and other non-shear related effects such as a/d ratio that cannot be filtered out. Therefore, proper design of shear strengthening using FRP requires testing of elements that are subjected to pure shear case primary before adding other governing effects. This allows a careful investigation and full understanding of the behavior at the element level. In order to accomplish this task, panel testing of representative RC specimens strengthened with FRP sheets were needed. This paper reports the testing of 10 FRP strengthened RC panels subjected to pure shear stress field. The tests were carried out to evaluate the effects of three variables: FRP stiffness, FRP wrapping scheme, and transverse steel reinforcement ratio. The test results showed that these three variables greatly affected the shear behavior due to various types of failure modes associated with FRP strengthening. In addition, it was observed that the magnitude of increased shear capacity associated with the application of FRP sheets depends not only upon the stiffness of FRP, but also on the stiffness of internal shear reinforcement. With the increase of internal steel shear reinforcement, the effectiveness of shear gain due to externally bonded FRP decreases
A Predictive Structural Model of Standards-Based School Evaluation on Student Outcome
The current study examined the relationship between school leadership, school environment, teaching and learning strategies, and students’ performance on national assessment in math and science. In addition, it examined the mediating role of teaching and learning strategies in its relation to school leadership, school environment, and students’ performance in math and science as well. Study data was utilized from two datasets. First, the School Evaluation Standards scale (SES), which includes three subscales: school leadership, school environment, and teaching and learning strategies was utilized from a total of 711 schools that were randomly chosen from Saudi Arabia. Second, these school average scores in national assessment of math and science were collected. The finding revealed that there were direct and indirect effects of school leadership, school environment, teaching and learning strategies on students’ performance in math and science. Furthermore, teaching and learning strategies played as mediator between school leadership and school environment and students performance in math and science. The results of the research provided insights on how school evaluation standards (SES) affect academic performance and learning outcomes. Educational policy makers can benefit from the results of this study by evaluating school performance assessment standards and the level of practices to gauge the degree of application in real world practices and determine the room for improvements
- …