501 research outputs found
Recommended from our members
General method for prediction of thermal conductivity for well-characterized hydrocarbon mixtures and fuels up to extreme conditions using entropy scaling
A general and efficient technique is developed to predict the thermal conductivity of well-characterized hydrocarbon mixtures, rocket propellant (RP) fuels, and jet fuels up to high temperatures and high pressures (HTHP). The technique is based upon entropy scaling using the group contribution method coupled with the Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT) equation of state. The mixture number averaged molecular weight and hydrogen to carbon ratio are used to define a single pseudo-component to represent the compounds in a well-characterized hydrocarbon mixture or fuel. With these two input parameters, thermal conductivity predictions are less accurate when the mixture contains significant amounts of iso-alkanes, but the predictions improve when a single thermal conductivity data point at a reference condition is used to fit one model parameter. For eleven binary mixtures and three ternary mixtures at conditions from 288 to 360âŻK and up to 4,500âŻbar, thermal conductivities are predicted with mean absolute percent deviations (MAPDs) of 16.0 and 3.0% using the two-parameter and three-parameter models, respectively. Thermal conductivities are predicted for three RP fuels and three jet fuels at conditions from 293 to 598âŻK and up to 700âŻbar with MAPDs of 14.3 and 2.0% using the two-parameter and three-parameter models, respectively
MUDPIT ANALYSIS OF PSEUDOMONAS AERUGINOSA SECRETOME: CONSEQUENCES OF OXYGEN LIMITATION IN CLINICAL AND LABORATORY STRAINS
This review discusses the efficacy and safety in chronic inflammatory demyelinating polyradiculoneuropathy (CIDP) of intravenous immunoglobulin and compares this treatment with plasma exchange and prednisolone. We searched publications from 1985 onwards for randomised controlled studies examining the effects of intravenous immunoglobulin in patients with this immune-mediated neuromuscular disorder. Six trials, with 170 patients in total, were judged eligible. A significantly higher proportion of patients improved in disability within a month after the start of treatment with intravenous immunoglobulin than with placebo (relative risk 3.17 [95% CI 1.74 to 5.75]). During this period, intravenous immunoglobulin has similar efficacy to plasma exchange and oral prednisolone; therefore which of these treatments should be the first choice is currently uncertain. An algorithm on treatment approaches for CIDP is propose
Enhancing surface heat transfer by carbon nanofins: towards an alternative to nanofluids?
Background: Nanofluids are suspensions of nanoparticles and fibers which have recently attracted much attention because of their superior thermal properties. Nevertheless, it was proven that, due to modest dispersion of nanoparticles, such high expectations often remain unmet. In this article, by introducing the notion of nanofin, a possible solution is envisioned, where nanostructures with high aspect-ratio are sparsely attached to a solid surface (to avoid a significant disturbance on the fluid dynamic structures), and act as efficient thermal bridges within the boundary layer. As a result, particles are only needed in a small region of the fluid, while dispersion can be controlled in advance through design and manufacturing processes. Results: Toward the end of implementing the above idea, we focus on single carbon nanotubes to enhance heat transfer between a surface and a fluid in contact with it. First, we investigate the thermal conductivity of the latter nanostructures by means of classical non-equilibrium molecular dynamics simulations. Next, thermal conductance at the interface between a single wall carbon nanotube (nanofin) and water molecules is assessed by means of both steady-state and transient numerical experiments. Conclusions: Numerical evidences suggest a pretty favorable thermal boundary conductance (order of 107 W·m-2·K-1) which makes carbon nanotubes potential candidates for constructing nanofinned surface
Thermal conductivity measurement of liquids in a microfluidic device
A new microfluidic-based approach to measuring liquid thermal conductivity is developed to address the requirement in many practical applications for measurements using small (microlitre) sample size and integration into a compact device. The approach also gives the possibility of high-throughput testing. A resistance heater and temperature sensor are incorporated into a glass microfluidic chip to allow transmission and detection of a planar thermal wave crossing a thin layer of the sample. The device is designed so that heat transfer is locally one-dimensional during a short initial time period. This allows the detected temperature transient to be separated into two distinct components: a short-time, purely one-dimensional part from which sample thermal conductivity can be determined and a remaining long-time part containing the effects of three-dimensionality and of the finite size of surrounding thermal reservoirs. Identification of the one-dimensional component yields a steady temperature difference from which sample thermal conductivity can be determined. Calibration is required to give correct representation of changing heater resistance, system layer thicknesses and solid material thermal conductivities with temperature. In this preliminary study, methanol/water mixtures are measured at atmospheric pressure over the temperature range 30â50°C. The results show that the device has produced a measurement accuracy of within 2.5% over the range of thermal conductivity and temperature of the tests. A relation between measurement uncertainty and the geometric and thermal properties of the system is derived and this is used to identify ways that error could be further reduced
Numerical model for the combustion of a thermal lance
A mathematical model for the operation of a thermal lance is developed and validated, with the focus on its heat transfer and kinetics behavior. It has been found that there is a "window"of combustion rates in which the thermal lance can operate, which is mainly dictated by the oxygen partial pressure. The particular value of the combustion rate can be set by adjusting the flow rate of the oxygen supply, which is practically done by manipulating the oxygen supply pressure. An open issue is the lack of experimental kinetics data for thermal lance combustion
Influenza A/H1N1 in patients with cystic fibrosis in Italy: a multicenter survey of the Italian CF Society
Communications Biophysics
COntains reports on six research projects.National Institutes of Health (Grant 2 P01 MH-04737-06)National Institutes of Health (Grant 5 ROl NB-05462-02)Joint Services Electronics Programs (U. S. Army, U. S. Navy, and U. S. Air Force) under Contract DA 36-039-AMC-03200(E)National Science Foundation (Grant GK-835)National Aeronautics and Space Administration (Grant NsG-496
A phase 3, multi-center, multinational, randomized, double-blind, placebo-controlled study to evaluate the efficacy and safety of levofloxacin inhalation solution (APT-1026) in stable cystic fibrosis patients
Rationale
For patients with cystic fibrosis (CF), the use of inhaled antibiotics has become standard of care to suppress chronic Pseudomonas airways infection. There are limited antibiotic options formulated and approved for inhaled use and antibiotic efficacies attenuate over time, making additional inhaled antibiotic classes desirable. APT-1026 (levofloxacin inhalation solution, LIS) is a fluoroquinolone in development for management of chronic P. aeruginosa airways infection in patients with CF.
Objectives
To compare the safety and efficacy of a 28-day course of treatment with LIS 240 mg or placebo BID in persons â„ 12 years old with CF and chronic P. aeruginosa infection.
Methods
A multinational, randomized (2:1), double-blinded study of LIS and placebo over 28 days in CF patients â„ 12 years with chronic P. aeruginosa infection. Time to exacerbation was the primary endpoint. FEV1 (% predicted) and patient-reported quality of life were among secondary endpoints.
Main results
Baseline demographics for 330 subjects (LIS = 220) were similar although significantly more patients randomized to LIS had experienced multiple exacerbations in the year prior to study entry. There was no statistically significant difference in protocol-defined pulmonary exacerbations between treatment arms. Relative change in FEV1% predicted from baseline was significantly greater for patients randomized to LIS compared to those randomized to placebo (mean difference 1.31%, p = 0.01 [95% CI 0.27, 2.34%]). LIS was well-tolerated, with dysguesia the most frequent adverse event.
Conclusions
LIS did not demonstrate a difference in time to next exacerbation when compared to placebo. Reasons for this result are discussed but may be due to an imbalance in the frequency of prior pulmonary exacerbations between the two groups. An improvement in FEV1 (% predicted) at 28 days was observed and LIS was well tolerated. LIS is safe and has a potential role in the management of CF patients with chronic P. aeruginosa
MudPIT analysis of released proteins in Pseudomonas aeruginosa laboratory and clinical strains in relation to pro-inflammatory effects
Pseudomonas aeruginosa (Pa) is the most common virulent pathogen contributing to the pathogenesis of cystic fibrosis (CF). During bacterial lung colonization, the products of its metabolism are released in the extracellular space contributing to the pathogenic events associated with its presence. To gain insights on the mechanisms involved in the Pa pathogenesis we focused our attention on proteins released by Pa using a MudPIT approach combined with cell biology assays. Conditioned medium (CM) collected under aerobic and microaerobic conditions from Pa clinical strains (in early and late colonization), unlike the laboratory strain, induced expression of IL-8 mRNA in CF airway epithelial cells. We have identified proteins released by clinically relevant Pa strains, focusing on the pro-inflammatory effects as metalloproteases (MMPs). In fact, their expression pattern was associated with the highest pro-inflammatory activity measured in the early clinically isolated strain. The relation was further supported by the result of the analysis of a larger and independent set of Pa isolates derived from sporadically and chronically infected CF patients: 76% of sporadic samples expressed protease activity (n = 44), while only 27% scored positive in the chronically infected individuals (n = 38, p < 0.0001, Fisher's exact test). Finally, looking for a possible mechanism of action of bacterial MMPs, we found that CM from early clinical isolates can cleave CXCR1 on the surface of human neutrophils, suggesting a potential role for the bacterially released MMPs in the protection of the pathogen from the host's response
- âŠ