Physicochemical and biological properties of different Cocoa Pod Husk-based composts

The objective was to evaluate the properties of cocoa pod husk-based composts for potential application as soil amendments for crop production. The physicochemical and biological properties of the compost types were analysed. Four compost types were prepared by mixing cocoa pod husk, poultry manure and Panicum maximum in different proportions. A phytotoxicity test was carried out using maize (Zea mays L.) to test whether the compost types contain substances that inhibit seed germination or growth of the radicle. Bulk densities of the compost types were higher than 0.160 Mg m-3, an indication that the compost types as soil amendment will restrict root growth thereby inhibiting plant growth. The average pH of the compost types falls within the optimum range of 6.5 to 8.5 and thus, the composts are stabilized. The compost types had high nitrogen content, so when utilized as a soil amendment would improve the nitrogen content of soils. Copper concentrations in the compost types were far below the WHO/FAO permissible limit of 100 mg kg-1, therefore can be applied at high rates without any problem of copper accumulation in soil. Phytophthora palmivora and Phytophthora megakarya were not detected from the compost types, therefore the compost types could be used without Phytophthora disease infection. Germination percentage and germination index showed that the analyzed compost types achieved high percentages of the germinating capacity of maize seeds and had no phytotoxic substances. The cocoa pod husk-based composts showed substantially varied physicochemical and biological properties suitable to support plant growth. The results clearly showed that, CPHcomp3 made from CPH residues, poultry manure and Panicum maximum at the ratio 6: 1: 2 mixture is recommended for use as a soil amendment for crop production

Thermodynamics of clay – Drug complex dispersions: Isothermal titration calorimetry and high-performance liquid chromatography

An understanding of the thermodynamics of the complexation process utilized in sustaining drug release in clay matrices is of great importance. Several characterisation techniques as well as isothermal calorimetry were utilized in investigating the adsorption process of a model cationic drug (diltiazem hydrochloride, DIL) onto a pharmaceutical clay system (magnesium aluminium silicate, MAS). X-ray powder diffraction (XRPD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and optical microscopy confirmed the successful formation of the DIL-MAS complexes. Drug quantification from the complexes demonstrated variable behaviour in the differing media used with DIL degrading to desacetyl diltiazem hydrochloride (DC-DIL) in the 2 M HCl media. Here also, the authors report for the first time two binding processes that occurred for DIL and MAS. A competitor binding model was thus proposed and the thermodynamics obtained suggested their binding processes to be enthalpy driven and entropically unfavourable. This information is of great importance for a formulator as care and consideration should be given with appropriate media selection as well as the nature of binding in complexes

The influence of hydroalcoholic media on the performance of Grewia polysaccharide in sustained release tablets

Co-administration of drugs with alcohol can affect the plasma concentration of drugs in patients. It is also known that the excipients used in the formulation of drugs may not always be resistant to alcohol. This study evaluates effect of varying alcohol concentrations on theophylline release from two grades of Grewia mollis polysaccharides. X-ray microtomography showed that native polysaccharide formulation compacts were not homogenous after the mixing process resulting in its failure in swelling studies. Removal of starch from the native polysaccharide resulted in homogenous formulation compacts resistant to damage in high alcoholic media in pH 6.8 (40%v/v absolute ethanol). Destarched polymer compacts had a significantly higher hardness (375 N) than that of the native polysaccharide (82 N) and HPMC K4 M (146 N). Dissolution studies showed similarity at all levels of alcohol tested (f2 = 57-91) in simulated gastric media (pH 1.2). The dissolution profiles in the simulated intestinal fluids were also similar (f2 = 60-94), with the exception of the native polysaccharide in pH 6.8 (40%v/v absolute ethanol) (f2 = 43). This work highlights the properties of Grewia polysaccharide as a matrix former that can resist high alcoholic effects therefore; it may be suitable as an alternative to some of the commercially available matrix formers with wider applications for drug delivery as a cheaper alternative in the developing world

Real time calorimetric characterisation of clay – drug complex dispersions and particles

Isothermal titration calorimetry (ITC) along with attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) and high-performance liquid chromatography (HPLC) were employed to investigate the process of adsorption of propranolol hydrochloride (PPN) onto magnesium aluminium silicate (MAS) and to characterise the MAS-PPN particles formed upon complexation. The composition of MAS was confirmed by infrared (IR) spectroscopy and a calcimeter. The calorimetric results confirmed the binding between PPN and MAS at various pHs and temperatures. The overall change in enthalpy was found to be exothermic with a comparatively small entropic contribution to the total change in Gibbs free energy. These findings suggest that the binding process was enthalpically driven and entropically unfavourable (lower affinity) suggesting hydrogen bonding and electrostatic interactions dominating the interaction. The variation of pH and temperature did not have a great impact on the thermodynamics of the binding process, as observed from the similarity in enthalpy (ΔH), entropy (ΔS) or Gibbs free energy (ΔG). A slight reduction in the binding affinity (Ka) with varing pH and temperature was however observed. SEM/EDX studies showed the occurrence of changes in the microstructural properties of MAS following complexation which may explain the potential of MAS-PPN complexes for controlled drug release promoting pharmaceutical innovation

Hot-melt extrusion process impact on polymer choice of glyburide solid dispersions : the effect of wettability and dissolution

The aim of this study was to evaluate the choice of polymer and polymer level on the performance of the microstructure and wettability of hot-melt extruded solid dispersion of Glyburide (Gly) as a model drug. The produced solid dispersion were characterised using scanning electron microscopy (SEM), image analysis using a focus variation instrument (FVI), differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), X-ray microtomography (XµT), dynamic contact angle measurement and dissolution analysis using biorelevant dissolution media (FASSIF). SEM and focus variation analysis showed that the microstructure and surface morphology was significantly different between samples produced. This was confirmed by further analysis using XµT which showed that an increase in polymer content brought about a decrease in the porosity of the hot-melt extruded dispersions. DSC suggested complete amorphorisation of Gly whereas XRPD suggested incomplete amorphorisation. The static and dynamic contact angle measurement correlated with the dissolution studies using FASSIF media indicating that the initial liquid imbibition process as captured by the dynamic contact angle directly affects the dissolution performance

Hydro-alcoholic media effects on theophylline release from sesamum polysaccharide gum matrices

Concomitant ingestion of alcohol and medications can greatly affect drug plasma concentrations as dose dumping or failure may occur as a result of the fact that formulation excipients may not always be resistant to alcohol. In this study, a natural polysaccharide (Sesamum radiatum gum) (SG) was extracted, characterised and used to formulate sustained release theophylline compacts to study the effect of varying alcohol concentrations (v/v) in dissolution media on drug release from these compacts. X-ray powder diffraction showed that the extracted gum was amorphous in nature with the powder having excellent compaction properties as observed with its compact being significantly harder than those prepared with pure hydroxypropyl methyl cellulose (HPMC) K4M. X-ray microtomography showed that the compacts produced were homogenous in nature, however, swelling studies showed failure of the compacts at the highest concentration of absolute ethanol used (40 %v/v). Dissolution studies showed similarity at all levels of alcohol tested (f2 = 57-91) in simulated gastric (0.1N HCl, pH 1.2) and intestinal fluids (phosphate buffer, pH 6.8) for the HPMC compacts whereas dissimilarity only occurred for the SG compacts at the highest alcohol concentration in both media (f2 = 35). The suitability of SG as a matrix former that can resist alcoholic effects therefore makes it suitable as an alternative polymer with wider applications for drug delivery

Evaluation of sesamum gum as an excipient in matrix tablets

In developing countries modern medicines are often beyond the affordability of the majority of the population. This is due to the reliance on expensive imported raw materials despite the abundance of natural resources which could provide an equivalent or even an improved function. The aim of this study was to investigate the potential of sesamum gum (SG) extracted from the leaves of Sesamum radiatum (readily cultivated in sub-Saharan Africa) as a matrix former. Directly compressed matrix tablets were prepared from the extract and compared with similar matrices of HPMC (K4M) using theophylline as a model water soluble drug. The compaction, swelling, erosion and drug release from the matrices were studied in deionized water, 0.1 N HCl (pH 1.2) and phosphate buffer (pH 6.8) using USP apparatus II. The data from the swelling, erosion and drug release studies were also fitted into the respective mathematical models. Results showed that the matrices underwent a combination of swelling and erosion, with the swelling action being controlled by the rate of hydration in the medium. SG also controlled the release of theophylline similar to the HPMC and therefore may have use as an alternative excipient in regions where Sesamum radiatum can be easily cultivated

Preparation and scale up of extended-release tablets of bromopride

Reproducibility of the tablet manufacturing process and control of its pharmaceutics properties depends on the optimization of formulation aspects and process parameters. Computer simulation such as Design of Experiments (DOE) can be used to scale up the production of this formulation, in particular for obtaining sustained-release tablets. Bromopride formulations are marketed in the form of extended-release pellets, which makes the product more expensive and difficult to manufacture. The aim of this study was to formulate new bromopride sustained release formulations as tablets, and to develop mathematical models to standardize the scale up of this formulation, controlling weight and hardness of the tablets during manufacture according to the USP 34th edition. DOE studies were conducted using Minitab(tm) software. Different excipient combinations were evaluated in order to produce bromopride sustained-release matrix tablets. In the scale-up study, data were collected and variations in tableting machine parameters were measured. Data were processed by Minitab(tm) software, generating mathematical equations used for prediction of powder compaction behavior, according to the settings of the tableting machine suitable for scale-up purposes. Bromopride matrix tablets with appropriate characteristics for sustained release were developed. The scale-up of the formulation with the most suitable sustained release profile was established by using mathematical models, indicating that the formulation can be a substitute for the pellets currently marketed

Macrophage susceptibility to infection by Ghanaian Mycobacterium tuberculosis complex lineages 4 and 5 varies with self-reported ethnicity

BackgroundThe epidemiology of Mycobacterium tuberculosis complex (MTBC) lineage 5 (L5) infections in Ghana revealed a significantly increased prevalence in Ewes compared to other self-reported ethnic groups. In that context, we sought to investigate the early phase of tuberculosis (TB) infection using ex vivo infection of macrophages derived from the blood of Ewe and Akan ethnic group volunteers with MTBC L4 and L5 strains.MethodsThe study participants consisted of 16 controls, among which self-reported Akan and Ewe ethnicity was equally represented, as well as 20 cured TB cases consisting of 11 Akans and 9 Ewes. Peripheral blood mononuclear cells were isolated from both healthy controls and cured TB cases. CD14+ monocytes were isolated and differentiated into monocyte-derived macrophages (MDMs) before infection with L4 or L5 endemic strains. The bacterial load was assessed after 2 hours (uptake) as well as 3 and 7 days post-infection.ResultsWe observed a higher capacity of MDMs from Ewes to phagocytose L4 strains (p < 0.001), translating into a higher bacillary load on day 7 (p < 0.001) compared to L5, despite the higher replication rate of L5 in Ewe MDMs (fold change: 1.4 vs. 1.2, p = 0.03) among the controls. On the contrary, within macrophages from Akans, we observed a significantly higher phagocytic uptake of L5 (p < 0.001) compared to L4, also translating into a higher load on day 7 (p = 0.04). However, the replication rate of L4 in Akan MDMs was higher than that of L5 (fold change: L4 = 1.2, L4 = 1.1, p = 0.04). Although there was no significant difference in the uptake of L4 and L5 among cured TB cases, there was a higher bacterial load of both L4 (p = 0.02) and L5 (p = 0.02) on day 7 in Ewe MDMs.ConclusionOur results suggest that host ethnicity (driven by host genetic diversity), MTBC genetic diversity, and individual TB infection history are all acting together to modulate the outcome of macrophage infections by MTBC