Hot Corrosion of Weldments

Hot corrosion of the weldment is the result of the reaction between oxidation and sulfidation, which affects welded joints exposed to combustion gases containing sulfate coal ash at high temperature. It is also demonstrated that welding processes, weld consumables, temperature of exposure, and mixture of salt environment are important factors in hot corrosion of the weldment

Nutrient Content and Nutrient Uptake of Rice by The Impact of Inorganic, Organic, and Biological Sources of Nutrients in An Inceptisol Soil of Tamil Nadu

Using the rice variety ADT-37, a field experiment was conducted in the rabi season of 2023 in Tamil Nadu.  The scope of the study is to find out the impact of different sources of nutrients on nutrient content and uptake of rice.  Most of the previous research work has combined inorganic and organic sources, or inorganic alone or organic alone or anyone with biological.  Here we have included inorganic, organic and biological sources of nutrients. The experiment included of nine treatments viz., T1 – Control, T2 - 100% RDF, T3 - 125% RDF , T4 - 100% RDF + Press mud @ 10 t ha-1 + 2% Zinc Solubilizing Bacteria, T5 – 100% RDF + Vermicompost @ 6 t ha-1 + 2% Zinc Solubilizing Bacteria, T6 – 100% RDF + Coirpith Compost @ 6 t ha-1 + 2% Zinc Solubilizing Bacteria, T7 – 125% RDF + Press mud @ 10 t ha-1 + 2% Zinc Solubilizing Bacteria, T8 – 125% RDF + Vermicompost @ 6 t ha-1 + 2% Zinc Solubilizing Bacteria, T9 – 125% RDF + Coirpith Compost @ 6 t ha-1 + 2% Zinc Solubilizing Bacteria.  The result concluded that 125% RDF + Vermicompost @ 6 t ha-1 + 2% Zinc Solubilizing Bacteria (T8) resulted maximum values in nutrient content and significantly higher in nutrient uptake values

Effect of timing and graded levels of nitrogen and potassium in SRI cultivation

A field experiment was carried out at Annamalai University Experimental farm, Annamalai nagar, during Kuruvai and Navarai in the year 2008-09. To study the timing and graded levels of nitrogen and potassium in rice crop under SRI (System of rice intensification) cultivation. The experiment was laid out on deep clay soil by adopting randomized block design with factorial technique (FRBD). The results of field experiment revealed that the maximum growth and yield attributes were recorded in the treatment which received P2O5 as fully basal dose and nitrogen as three split doses viz., 50% basal and 25% each at tillering and panicle initiation stages. Potassium was applied as 33.3% K2O each at 15, 30 and 45 DAT. This treatment significantly recorded higher grain yield of 6278.7 kg ha-1 in field experiment – I and 6577.9 kg ha-1 in field experiment – II; and the straw yield of 7010.3 and 7309.7 kg ha-1 in field experiment I and II respectively. The shoot and grain uptake of nutrients (N, P and K) were high during 15, 30 and 45 DAT and at harvest which received 33.3 % K2O each at 15, 30 and 45 DAT

Mechanical Characterization of Monel 400 and 316 Stainless Steel Weldments

AbstractDissimilar combinations of Monel 400 and austenitic stainless steel AISI 316 is widely used in the petrochemical, nuclear industries where the weldments are usually subjected to hot corrosion. This paper deals with the assessment of metallurgical and mechanical properties of these bimetallic joints obtained by Gas Tungsten Arc Welding process using ERNiCrMo-3 filler metal. A detailed structure- property relationship was made on these bimetallic joints using the combined techniques of optical microscopy, SEM/EDAX analysis

Silencing by nuclear matrix attachment distinguishes cell-type specificity: association with increased proliferation capacity

DNA loop organization by nuclear scaffold/matrix attachment is a key regulator of gene expression that may provide a means to modulate phenotype. We have previously shown that attachment of genes to the NaCl-isolated nuclear matrix correlates with their silencing in HeLa cells. In contrast, expressed genes were associated with the lithium 3,5-diiodosalicylate (LIS)-isolated nuclear scaffold. To define their role in determining phenotype matrix attached regions (MARs) on human chromosomes 14–18 were identified as a function of expression in a primary cell line. The locations of MARs in aortic adventitial fibroblast (AoAF) cells were very stable (r = 0.909) and 96% of genes attached at MARs are silent (P < 0.001). Approximately one-third of the genes uniquely expressed in AoAF cells were associated with the HeLa cell nuclear matrix and silenced. Comparatively, 81% were associated with the AoAF cell nuclear scaffold (P < 0.001) and expressed. This suggests that nuclear scaffold/matrix association mediates a portion of cell type-specific gene expression thereby modulating phenotype. Interestingly, nuclear matrix attachment and thus silencing of specific genes that regulate proliferation and maintain the integrity of the HeLa cell genome suggests that transformation may at least in part be achieved through aberrant nuclear matrix attachment

Empirical investigation to explore potential gains from the amalgamation of Phase Changing Materials (PCMs) and wood shavings

The reduction of gained heat, heat peak shifting and the mitigation of air temperature fluctuations are some desirable properties that are sought after in any thermal insulation system. It cannot be overstated that these factors, in addition to others, govern the performance of such systems thus their effect on indoor ambient conditions. The effect of such systems extends also to Heating, Ventilation and Air-conditioning (HVAC) systems that are set up to operate optimally in certain conditions. Where literature shows that PCMs and natural materials such as wood-shavings can provide efficient passive insulation for buildings, it is evident that such approaches utilise methods that are of a degree of intricacy which requires specialist knowledge and complex techniques, such as micro-encapsulation for instance. With technical and economic aspects in mind, an amalgam of PCM and wood-shavings has been created for the purpose of being utilised as a feasible thermal insulation. The amalgamation was performed in the simplest of methods, through submerging the wood shavings in PCM. An experimental procedure was devised to test the thermal performance of the amalgam and compare this to the performance of the same un-amalgamated materials. Comparative analysis revealed that no significant thermal gains would be expected from such amalgamation. However, significant reduction in the total weight of the insulation system would be achieved that, in this case, shown to be up to 20.94%. Thus, further reducing possible strains on structural elements due to the application of insulation on buildings. This can be especially beneficial in vernacular architectural approaches where considerably large amounts and thicknesses of insulations are used. In addition, cost reduction could be attained as wood shavings are significantly cheaper compared to the cost of PCMs