Prevalence of anti-sperm antibodies, risk factors associated and their impact on spermatobioscopy in infertile men

Background: The first immunological correlation with male infertility was reported in 1954 by Wilson and Rumke with the identification of anti-sperm antibodies. The prevalence of anti-sperm antibodies in infertile men varies from 9%-36%, the main cause being the loss of the blood-testicular barrier and otherwise the association with chronic inflammation. It has been shown that immune infertility is found in 15% of patients with varicocele.Methods: A transversal comparative study was carried out with 360 infertile men who were tested for anti-sperm antibodies between January 2011 and July 2018. Two groups were integrated; Group 1, infertile men with positive anti-sperm antibodies >50%, group 2, infertile men with negative anti-sperm <50%. Seminogram parameters were evaluated according to the WHO 5th edition and associated risk factors with anti-sperm antibodies.Results: 360 infertile men were evaluated during the study, 42 were excluded because they did not meet the inclusion criteria, the prevalence of anti-sperm antibodies was 14.5%. Group 1; n=46 (14.5%) and group 2, n=272 (85.5%), the clinical characteristics and the hormonal profile were compared at study admission without significant difference. There was a significant decrease in progressive motility in group 1 (38.7±23.8) vs group 2 (50.1±18.9) p=0.03. Analyzing the risk factors, varicocele was found to be significant 23.7%, OR 2.14 (1.27-3.61) p=0.004 as well as retractable testicle 26.4%, OR 2.13 (1.23-3.70) p= 0.008.Conclusions: The affectation of motility was confirmed, which leads to the suspect varicocele and retractable testicle as risk factors

Towards precision medicine: defining and characterizing adipose tissue dysfunction to identify early immunometabolic risk in symptom-free adults from the GEMM family study

Interactions between macrophages and adipocytes are early molecular factors influencing adipose tissue (AT) dysfunction, resulting in high leptin, low adiponectin circulating levels and low-grade metaflammation, leading to insulin resistance (IR) with increased cardiovascular risk. We report the characterization of AT dysfunction through measurements of the adiponectin/leptin ratio (ALR), the adipo-insulin resistance index (Adipo-IRi), fasting/postprandial (F/P) immunometabolic phenotyping and direct F/P differential gene expression in AT biopsies obtained from symptom-free adults from the GEMM family study. AT dysfunction was evaluated through associations of the ALR with F/P insulin-glucose axis, lipid-lipoprotein metabolism, and inflammatory markers. A relevant pattern of negative associations between decreased ALR and markers of systemic low-grade metaflammation, HOMA, and postprandial cardiovascular risk hyperinsulinemic, triglyceride and GLP-1 curves was found. We also analysed their plasma non-coding microRNAs and shotgun lipidomics profiles finding trends that may reflect a pattern of adipose tissue dysfunction in the fed and fasted state. Direct gene differential expression data showed initial patterns of AT molecular signatures of key immunometabolic genes involved in AT expansion, angiogenic remodelling and immune cell migration. These data reinforce the central, early role of AT dysfunction at the molecular and systemic level in the pathogenesis of IR and immunometabolic disorders

Diseño de un colector solar de placa plana; Design of a Solar Flat Plate Collector

En el presente artículo se integra el uso de un software de diseño mecánico y un algoritmo de simulación de la operación de un colector solar de placa plana, con el objetivo de simplificar el proceso de diseño y manufactura de este último. Se exponen los resultados de la simulación de la operación del colector solar considerando diferentes combinaciones en los parámetros de los materiales utilizados, tales como sus propiedades y características físico químicas, además de la variación de las dimensiones del sistema adiseñar. Finalmente en el artículo se evalúa la operación de un colector solar para las condiciones climatológicas típicas de la irradiancia, velocidad de viento y temperatura ambiente a partir de una serie de curvas sinusoidales, típicas de Cuba, validándose la viabilidad del algoritmo como apoyo en la etapa de diseño y selección de materiales.In this article the use of mechanical design software and an algorithm for simulating the operation of a flat plate solar collector, with the objective of simplifying the process of design and manufacture of the latter isintegrated. The simulation results of the operation of the solar collector considering different combinations in the parameters of the materials used, such as its physicochemical properties and features in addition to thevariation of the dimensions of the system design are set. The article finally evaluates the operation of a solar collector for typical climatic conditions of irradiance, wind speed and ambient temperature from a series ofsinusoidal, typical Cuba curves is evaluated, validating the feasibility of the algorithm as support in step design and material selection.</em

Diseño de un colector solar de placa plana

In this article the use of mechanical design software and an algorithm for simulating the operation of a flat plate solar collector, with the objective of simplifying the process of design and manufacture of the latter is integrated. The simulation results of the operation of the solar collector considering different combinations in the parameters of the materials used, such as its physicochemical properties and features in addition to the variation of the dimensions of the system design are set. The article finally evaluates the operation of a solar collector for typical climatic conditions of irradiance, wind speed and ambient temperature from a series of sinusoidal, typical Cuba curves is evaluated, validating the feasibility of the algorithm as support in step design and material selection.En el presente artículo se integra el uso de un software de diseño mecánico y un algoritmo de simulación de la operación de un colector solar de placa plana, con el objetivo de simplificar el proceso de diseño y manufactura de este último. Se exponen los resultados de la simulación de la operación del colector solar considerando diferentes combinaciones en los parámetros de los materiales utilizados, tales como sus propiedades y características físico químicas, además de la variación de las dimensiones del sistema a diseñar. Finalmente en el artículo se evalúa la operación de un colector solar para las condiciones climatológicas típicas de la irradiancia, velocidad de viento y temperatura ambiente a partir de una serie de curvas sinusoidales, típicas de Cuba, validándose la viabilidad del algoritmo como apoyo en la etapa de diseño y selección de materiales

Phase and amplitude reconstruction in single-pixel transmission microscopy: a comparison of Hadamard, cosine, and noiselet bases

Hadamard, cosine, and noiselet bases are implemented into a digital holographic microscope based on single-pixel imaging with the capability to retrieve images of complex objects. The object is illuminated with coherent light modulated with different patterns deployed in a digital micromirror device, and the resulting fields are captured by single-pixel detection. For amplitude images, the experimental results of the three bases are evaluated with the peak SNR criteria. It is shown that the cosine basis recovers amplitude distributions with the best quality. Regarding phase images, the recovered ones compare well with those obtained with a CMOS camera.Ministerio de Ciencia, Innovación y Universidades (PID2019-110927RB-I00/AEI/10.13039/501100011033); Consejo Nacional de Ciencia y Tecnología (CB-252867, Infraestrcutura-299552); Generalitat Valenciana (PROMETEO/2020/029)

Sociedad y economía : estudios sobre Puerto Vallarta y su región

De manera general, podemos decir que los temas que se incluyen en este libro abordan aspectos muy significativos sobre la problemática económica y social de la región de Bahía de Banderas que seguramente nos permitirán entender la realidad que se vive en esta parte de la costa de Jalisco, y por qué no, tratar de incidir en ella para transformarla

Acute Consumption of Resistant Starch Reduces Food Intake but Has No Effect on Appetite Ratings in Healthy Subjects

Previous studies have shown the benefits of native banana starch (NBS) supplementation in improving glucose metabolism and reducing body weight (BW) in humans. However, the effect of this starch on appetite regulation is unknown. The aim of this study was to examine the effects of NBS rich resistant starch on subjective measurements of appetite, energy intake, and appetite hormones in healthy subjects. Postprandial glucose and insulin responses were also assessed. In a randomized, single-blind, crossover study, 28 healthy young subjects consumed a beverage containing either 40 g of NBS or 40 g of digestible corn starch (DCS) on two separate occasions. Effects on appetite were estimated using visual analogue scales (VAS) and satiety hormone responses. At the end of the intervention, participants were provided with a pre-weighed ad libitum homogeneous test meal. After a washout period of 1 week, subjects received the alternative treatment. NBS supplementation induced a reduction in food intake, glucose area under the curve (AUC)-180 min, and insulin AUC-180 min. However, there was no associated effect on the subjective appetite ratings or gut hormones. NBS supplementation may help to reduce meal size and control BW