urinary metabolomics study of workers exposed to hexavalent chromium

Exposure to hexavalent chromium Cr(VI) may occur in several occupational activities, placing workers in many industries at risk for potential related health outcomes. Untargeted metabolomics was applied to investigate changes in metabolic pathways in response to Cr(VI) exposure. We obtained our data from a study population of 220 male workers with exposure to Cr(VI) and 102 male controls from Belgium, Finland, Poland, Portugal and the Netherlands within the HBM4EU Chromates Study. Urinary metabolite profiles were determined using liquid chromatography mass spectrometry, and differences between post-shift exposed workers and controls were analyzed using principal component analysis. Based on the first two principal components, we observed clustering by industrial chromate application, such as welding, chrome plating, and surface treatment, distinct from controls and not explained by smoking status or alcohol use. The changes in the abundancy of excreted metabolites observed in workers reflect fatty acid and monoamine neurotransmitter metabolism, oxidative modifications of amino acid residues, the excessive formation of abnormal amino acid metabolites and changes in steroid and thyrotropin-releasing hormones. The observed responses could also have resulted from work-related factors other than Cr(VI). Further targeted metabolomics studies are needed to better understand the observed modifications and further explore the suitability of urinary metabolites as early indicators of adverse effects associated with exposure to Cr(VI).publishersversionpublishe

usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposure

Funding Information: This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. Luxembourg entered the study at a later stage and thus financed the study at its own means. Publisher Copyright: © 2022 The AuthorsOccupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P–Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P–Cr concentrations. RBC-Cr and P–Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P–Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P–Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context.publishersversionpublishe

HBM4EU chromates study: determinants of exposure to hexavalent chromium in plating, welding and other occupational settings

Work-related exposures in industrial processing of chromate (chrome plating, surface treatment, and welding) raise concerns regarding the health risk of hexavalent chromium (Cr(VI)). In this study, performed under the HBM4EU project, we focused on better understanding the determinants of exposure and recognising how risk management measures (RMMs) contribute to a reduction in exposure. HBM and occupational hygiene data were collected from 399 workers and 203 controls recruited in nine European countries. Urinary total chromium (U-Cr), personal inhalable and respirable dust of Cr and Cr(VI), and Cr from hand wipes were collected. Data on the RMMs were collected by questionnaires. We studied the association between different exposure parameters and the use of RMMs. The relationship between exposure by inhalation and U-Cr in different worker groups was analysed using regression analysis and found a strong association. Automatisation of Cr electroplating dipping explained lower exposure levels in platers. The use of personal protective equipment resulted in lower U-Cr levels in welding, bath plating, and painting. An effect of wearing gloves was observed in machining. An effect of local exhaust ventilation and training was observed in welding. Regression analyses showed that in platers, exposure to an air level of 5 µg/m3 corresponds to a U-Cr level of 7 µg/g of creatinine. In welders, the same inhalation exposure resulted in lower U-Cr levels reflecting toxicokinetic differences of different chromium species.info:eu-repo/semantics/publishedVersio

HBM4EU chromates study - Usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposure

Occupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P-Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P-Cr concentrations. RBC-Cr and P-Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P-Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P-Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context.Highlights: - Suitability of blood biomarkers was evaluated to assess occupational Cr(VI)exposure; - Bath platers and painters had higher Red Blood Cells-Cr levels compared to controls; - Bath platers, painters and welders had higher plasma-Cr levels compared to controls; Red Blood Cells- and Plasma-Cr were highly correlated with inhalable Cr(VI) in platers; Blood-Cr biomarkers can provide information on systemic and intracellular availability.This work has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author’s organizations and/or Ministries. Luxembourg entered the study at a later stage and thus financed the study at its own means.info:eu-repo/semantics/publishedVersio

The HBM4EU chromates study – Outcomes and impacts on EU policies and occupational health practices

Within the EU human biomonitoring initiative (HBM4EU), a targeted, multi-national study on occupational exposure to hexavalent chromium (Cr(VI)) was performed. Cr(VI) is currently regulated in EU under REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) and under occupational safety and health (OSH) legislation. It has recently been subject to regulatory actions to improve its risk management in European workplaces. Analysis of the data obtained within the HBM4EU chromates study provides support both for the implementation of these regulatory actions and for national enforcement programs and may also contribute to the updating of occupational limit values (OELs) and biological limit values for Cr(VI). It also provides useful insights on the contribution of different risk management measures (RMMs) to further reduce the exposure to Cr(VI) and may support the evaluation of applications for authorisation under REACH. Findings on chrome platers’ additional per- and polyfluoroalkyl substances (PFAS) exposure highlight the need to also pay attention to this substance group in the metals sector. A survey performed to evaluate the policy relevance of the HBM4EU chromates study findings supports the usefulness of the study results. According to the responses received from the survey, the HBM4EU chromates study was able to demonstrate the added value of the human biomonitoring (HBM) approach in assessment and management of occupational exposure to Cr(VI). For future occupational studies, we emphasise the need for engagement of policy makers and regulators throughout the whole research process to ensure awareness, relevance and uptake of the results in future policies.Highlights: Potential policy impact of the HBM4EU chromates study is presented and discussed; Surveyed policy makers confirmed policy relevance of biomonitoring results; Study considered to support national enforcement and further lowering of OELs; Added value of HBM in the management of occupational exposure to Cr(VI) was demonstrated; Close co-operation with regulators to support policy uptake is emphasised.Funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries.info:eu-repo/semantics/publishedVersio

The HBM4EU chromates study – Outcomes and impacts on EU policies and occupational health practices

Funding Information: The recently completed EU human biomonitoring initiative (HBM4EU, www.hbm4eu.eu/about-hbm4eu/), was a European Joint Programme that aimed to harmonise the collection and use of biomonitoring data to better understand human exposure to chemicals in the environment, in occupational settings and through the use of consumer products to improve chemical risk assessment and management efforts, and to support policy making (Ganzleben et al., 2017). Within the context of the HBM4EU project several priority substances were selected for investigation based on the most important needs of policy makers and risk assessors, as well as common needs of participating countries and a broad range of other stakeholders including trade unions (Ougier et al., 2021). Many of the priority substances, along with having an important economic role, also pose health risks for workers due to their occupational use. One of the priority substances was hexavalent chromium (Cr(VI)), which was the main focus of the first of a series of three different HBM4EU occupational studies (Santonen et al. 2019a, 2022), the other two being focussed on electronic waste (E-waste) and diisocyanates exposures (Jones et al., 2022; Scheepers et al., 2021). In addition to Cr(VI), it was recognised that in chrome plating activities there may also be exposure to another group of HBM4EU priority chemicals, per- and polyfluoroalkyl substances (PFASs). PFASs, including PFOS (perfluorooctane sulfonate), have been used as mist suppressants in chrome plating baths to prevent the evaporation of Cr(VI) vapours (Blepp et al., 2017; Gluge et al., 2020). Although PFOS has now been largely replaced in the EU, many of its substitutes in chrome plating activities are also PFASs which may cause similar health and environmental concerns.Occupational exposure to Cr(VI) has been associated with an increased risk of lung and sinonasal cancers and is suspected to lead to gastrointestinal tract cancers (den Braver-Sewradj et al., 2021; ECHA 2013; IARC 2012). In addition, it is a common cause of occupational asthma, allergic dermatitis and there is a concern for adverse effects on reproductive health (Sun and Costa 2022). Exposure to Cr(VI) may occur in several occupational activities, e.g., in welding, Cr(VI) electroplating and other surface treatment processes such as paint application and removal of old paint containing Cr(VI) (SCOEL 2017). In order to limit the workers’ exposure to Cr(VI) in the EU, Cr(VI) is currently regulated under both the European regulation (EC 1907/2006) on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) and the EU Directive 2004/37/EC on the protection of workers from the risks related to exposure to carcinogens, mutagens or reprotoxic substances at work (CMRD) (EU 2004). The current binding Occupational Exposure Limit (OEL) set under the EU Directive 2004/37/EC is 10 μg/m3 (8-h time-weighted average (8-h TWA)) until January 17, 2025. After that period, the OEL (8-h TWA) will be reduced to 5 μg/m3. For welding, plasma-cutting processes and similar work processes that generate fumes, there is a derogation with an OEL of 25 μg/m³ (8-h TWA) until January 2025; after that date the OEL (8-h TWA) of 5 μg/m3 will be applicable. France, the Netherlands and Denmark already have stricter limits, with an OEL of 1 μg/m3 (8-h TWA) for Cr(VI) in all uses (Beskæftigelsesministeriet 2020; Ministère du travail, 2012; MinSZW 2016). In the US, the American Conference of Governmental Industrial Hygienists (ACGIH) has published, for inhalable Cr(VI) compounds, a threshold limit value (TLV) of 0.2 μg/m3 (8-h TWA) and a TLV Short-Term Exposure Limit (STEL) of 0.5 μg/m3 (ACGIH 2021). No EU-wide biological limit values (BLVs) for Cr(VI) are available, however some Member States have set BLVs for occupational exposure to Cr(VI), measured as urinary chromium (U–Cr). For example, France and Finland have derived BLVs of 2.5 μg/L and 10 μg/L corresponding to their respective OELs of 1 μg/m3 and 5 μg/m3 for Cr(VI) (ANSES 2017; STM 2020). The German Research Foundation (DFG 2020) has established biological exposure equivalents for carcinogenic substances (EKA values), ranging from 12 to 40 μg/L for U–Cr. These correspond to exposures ranging between 30 and 100 μg/m3 soluble alkaline chromate and/or Cr(VI) containing welding fumes over an 8-h work shift (Bolt and Lewalter 2012). Since these current national BLVs are mainly based on studies from plating workers, they include uncertainties especially concerning their applicability to workplaces other than the electroplating industry. One of the main aims of the HBM4EU chromates study was to provide EU relevant data on the current occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making process. In addition, exposure to PFASs was evaluated in a subset of workers performing chrome plating activities.This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. The project team would like to thank all the companies and workers who participated in the HBM4EU chromates study and all the experts who have contributed to the conduct of the study. Participants of the HBM4EU chromates study workshop and policy questionnaires are also acknowledged. Mr. Jouko Remes and Dr. Kia Gluschkoff (Finnish Institute of Occupational Health) are acknowledged for their assistance with the statistical analyses and figures. Funding Information: This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. Publisher Copyright: © 2022 The AuthorsWithin the EU human biomonitoring initiative (HBM4EU), a targeted, multi-national study on occupational exposure to hexavalent chromium (Cr(VI)) was performed. Cr(VI) is currently regulated in EU under REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) and under occupational safety and health (OSH) legislation. It has recently been subject to regulatory actions to improve its risk management in European workplaces. Analysis of the data obtained within the HBM4EU chromates study provides support both for the implementation of these regulatory actions and for national enforcement programs and may also contribute to the updating of occupational limit values (OELs) and biological limit values for Cr(VI). It also provides useful insights on the contribution of different risk management measures (RMMs) to further reduce the exposure to Cr(VI) and may support the evaluation of applications for authorisation under REACH. Findings on chrome platers’ additional per- and polyfluoroalkyl substances (PFAS) exposure highlight the need to also pay attention to this substance group in the metals sector. A survey performed to evaluate the policy relevance of the HBM4EU chromates study findings supports the usefulness of the study results. According to the responses received from the survey, the HBM4EU chromates study was able to demonstrate the added value of the human biomonitoring (HBM) approach in assessment and management of occupational exposure to Cr(VI). For future occupational studies, we emphasise the need for engagement of policy makers and regulators throughout the whole research process to ensure awareness, relevance and uptake of the results in future policies.publishersversionepub_ahead_of_prin

Risk of survival, establishment and spread of Batrachochytrium salamandrivorans (Bsal) in the EU

Batrachochytrium salamandrivorans (Bsal) is an emerging fungal pathogen of salamanders. Despite limited surveillance, Bsal was detected in kept salamanders populations in Belgium, Germany, Spain, the Netherlands and the United Kingdom, and in wild populations in some regions of Belgium, Germany and the Netherlands. According to niche modelling, at least part of the distribution range of every salamander species in Europe overlaps with the climate conditions predicted to be suitable for Bsal. Passive surveillance is considered the most suitable approach for detection of Bsal emergence in wild populations. Demonstration of Bsal absence is considered feasible only in closed populations of kept susceptible species. In the wild, Bsal can spread by both active (e.g. salamanders, anurans) and passive (e.g. birds, water) carriers; it is most likely maintained/spread in infected areas by contacts of salamanders or by interactions with anurans, whereas human activities most likely cause Bsal entry into new areas and populations. In kept amphibians, Bsal contamination via live silent carriers (wild birds and anurans) is considered extremely unlikely. The risk-mitigation measures that were considered the most feasible and effective: (i) for ensuring safer international or intra-EU trade of live salamanders, are: ban or restrictions on salamander imports, hygiene procedures and good practice manuals; (ii) for protecting kept salamanders from Bsal, are: identification and treatment of positive collections; (iii) for on-site protection of wild salamanders, are: preventing translocation of wild amphibians and release/return to the wild of kept/temporarily housed wild salamanders, and setting up contact points/emergency teams for passive surveillance. Combining several risk-mitigation measures improve the overall effectiveness. It is recommended to: introduce a harmonised protocol for Bsal detection throughout the EU; improve data acquisition on salamander abundance and distribution; enhance passive surveillance activities; increase public and professionals’ awareness; condition any movement of captive salamanders on Bsal known health status.info:eu-repo/semantics/publishedVersio

HBM4EU chromates study - Overall results and recommendations for the biomonitoring of occupational exposure to hexavalent chromium

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals.This work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 733032 and received co-funding from the author's organizations and/or Ministries. Luxembourg entered the study at a later stage and thus financed the study at its own means.S

Amorphous formulations of indomethacin and griseofulvin prepared by electrospinning

Following an array of optimization experiments, two series of electrospun polyvinylpyrrolidone (PVP) fibers were prepared. One set of fibers contained various loadings of indomethacin, known to form stable glasses, and the other griseofulvin (a poor glass former). Drug loadings of up to 33% w/w were achieved. Electron microscopy data showed the fibers largely to comprise smooth and uniform cylinders, with evidence for solvent droplets in some samples. In all cases, the drug was found to exist in the amorphous physical state in the fibers on the basis of X-ray diffraction and differential scanning calorimetry (DSC) measurements. Modulated temperature DSC showed that the relationship between a formulation’s glass transition temperature (<i>T</i>_g) and the drug loading follows the Gordon–Taylor equation, but not the Fox equation. The results of Gordon–Taylor analysis indicated that the drug/polymer interactions were stronger with indomethacin. The interactions between drug and polymer were explored in more detail using molecular modeling simulations and again found to be stronger with indomethacin; the presence of significant intermolecular forces was further confirmed using IR spectroscopy. The amorphous form of both drugs was found to be stable after storage of the fibers for 8 months in a desiccator (relative humidity <25%). Finally, the functional performance of the fibers was studied; in all cases, the drug-loaded fibers released their drug cargo very rapidly, offering accelerated dissolution over the pure drug

Genotoxicity biomarkers in workers exposed to hexavalent chromium: a study under the European Human Biomonitoring Initiative

No âmbito da Iniciativa Europeia em Biomonitorização Humana (HBM4EU) realizou-se um estudo ocupacional, envolvendo trabalhadores com potencial exposição a crómio hexavalente [Cr( VI)], um reconhecido agente carcinogénico. No presente estudo são apresentados os resultados de biomarcadores de genotoxicidade, incluindo a análise de lesão no DNA e de alterações cromossómicas em células sanguíneas. O estudo foi realizado em vários Países Europeus e abrangeu trabalhadores de diversos setores industriais e atividades, bem como um grupo de controlo constituído por trabalhadores administrativos das mesmas empresas (controlo interno) e de outras não relacionadas com produção/aplicação de Cr( VI) (controlo externo). Os resultados mostraram níveis de alterações cromossómicas (ensaio do micronúcleo) e de lesão no DNA (ensaio do cometa) significativamente aumentados nos trabalhadores expostos comparativamente aos controlos externos ( p=0,03; p<0,001, respetivamente). Estes resultados sugerem que mesmo um baixo nível de exposição ao Cr( VI) representa um risco acrescido para a saúde dos trabalhadores e, principalmente, para os que realizam cromagem em banho. O grupo controlo interno apresentou níveis médios de lesões no DNA e nos cromossomas comparáveis aos do grupo exposto, salientando a relevância de se considerarem também em risco. O uso de biomarcadores de efeito demonstrou ser crucial para a deteção precoce de efeitos biológicos decorrentes de baixos níveis de exposição ao Cr( VI), contribuindo para a identificação de subgrupos em maior risco. O presente estudo vem apoiar a necessidade de uma reavaliação do limite de exposição ocupacional a Cr( VI), bem como da implementação de medidas de gestão de risco conducentes a uma melhor proteção da saúde dos trabalhadores.An occupational study was carried out within the scope of the European Initiative on Human Biomonitoring (HBM4EU), involving workers with potential exposure to hexavalent chromium [Cr(VI)], a recognized carcinogenic agent. In the present study, the results of biomarkers of genotoxicity are presented, including the analysis of DNA damage and chromosomal alterations in blood cells. The study was carried out in several countries and included workers from different industrial sectors and activities, as well as a control group including administrative workers from the same companies (internal control) and from others not related to the production/application of Cr(VI) (external control). Results showed significantly increased levels of chromosomal alterations (micronucleus assay) and DNA damage (comet assay) in exposed workers compared to external controls (p=0.03; p<0.001, respectively). These results suggest that even a low level of exposure to Cr(VI) represents an increased risk for the health of workers and, mainly, for those who per form chromium bath plating. The internal control group displayed DNA and chromosomal damage levels comparable to those of the exposed group, highlighting the impor tance of also being considered as potentially at risk. The use of ef fect biomarkers proved to be crucial for the early detection of biological ef fects resulting from low levels of exposure to Cr(VI), contributing to the identification of subgroups at a higher risk. The present study suppor ts the need for a reassessment of the occupational exposure limit to Cr(VI), as well as the implementation of risk management measures leading to a better protection of workers' health.Este projeto recebeu financiamento do programa de investigação e inovação Horizonte 2020 da União Europeia sob o acordo de subvenção n.º 733032 e recebeu cofinanciamento das organizações dos autores.info:eu-repo/semantics/publishedVersio