FOURIER-MUKAI TRANSFORMS FOR SINGULAR PROJECTIVE VARIETIES

This Ph. D thesis deals with various aspects of the theory of derived categories of sheaves on projective varieties. The first result is a generalization of a representability theorem by Lunts and Orlov for fully faithful functors where the source derived category is the derived category of sheaves over the double point scheme. The second result is a description of the space of stability conditions for the same derived category. The final result is a descend criterion for equivariant sheaves to the quotient variety with respect to an action by a finite group

Effective resolution concepts for lidar observations

Abstract. Since its establishment in 2000, EARLINET (European Aerosol Research Lidar NETwork) has provided, through its database, quantitative aerosol properties, such as aerosol backscatter and aerosol extinction coefficients, the latter only for stations able to retrieve it independently (from Raman or high-spectral-resolution lidars). These coefficients are stored in terms of vertical profiles, and the EARLINET database also includes the details of the range resolution of the vertical profiles. In fact, the algorithms used in the lidar data analysis often alter the spectral content of the data, mainly acting as low-pass filters to reduce the high-frequency noise. Data filtering is described by the digital signal processing (DSP) theory as a convolution sum: each filtered signal output at a given range is the result of a linear combination of several signal input data samples (relative to different ranges from the lidar receiver), and this could be seen as a loss of range resolution of the output signal. Low-pass filtering always introduces distortions in the lidar profile shape. Thus, both the removal of high frequency, i.e., the removal of details up to a certain spatial extension, and the spatial distortion produce a reduction of the range resolution. This paper discusses the determination of the effective resolution (ERes) of the vertical profiles of aerosol properties retrieved from lidar data. Large attention has been dedicated to providing an assessment of the impact of low-pass filtering on the effective range resolution in the retrieval procedure

La salute degli anziani LGBT dalla prospettiva del minority stress. Rassegna della letteratura e raccomandazioni di ricerca

Lesbian, gay, bisexual, and transgender (LGBT) older adults have not received proper attention by the scientific literature and gerontology research, especially in Italy. This lack represents only an aspect of a more general condition of social invisibility that weighs on this population. The present contribution aims to provide researchers and clinicians with a review of scientific works which, especially in the USA, have casted light on experiences of stigmatization, discrimination, and victimization experienced and perceived by this population. The theoretical framework is represented by the minority stress perspective which provides an overview of risk and protective factors related to physical and mental health of minority groups. In the current review, authors considered studies conducted through quantitative, qualitative, and mixed methods, starting from 2000. Following the above described perspective, results are presented in two sections: the first one is focused on the different forms of stigma which weigh on LGBT older adults and the second one on the mental and physical health outcomes and on protective factors. The application of the minority stress perspective on LGBT older adults provides researchers and social and health care system providers with a psychosocial and clinical framework through which reading the phenomenon. Finally, main research recommendations are discussed

A fast Reoptimization approach for the dynamic technician routing and scheduling problem

The Technician Routing and Scheduling Problem (TRSP) consists in routing staff to serve requests for service, taking into account time windows, skills, tools, and spare parts. Typical applications include maintenance operations and staff routing in telecoms, public utilities, and in the health care industry. In this paper we tackle the Dynamic TRSP (D-TRSP) in which new requests appear over time. We propose a fast reoptimization approach based on a parallel Adaptive Large Neighborhood Search (RpALNS) able to achieve state-of-the-art results on the Dynamic Vehicle Routing Problem with Time Windows. In addition, we solve a set of randomly generated D-TRSP instances and discuss the potential gains with respect to a heuristic modeling a human dispatcher solution

Cooperativas e desenvolvimento de comunidades: promessas e decepções.

O artigo apresenta os resultados de uma pesquisa que analisou a aplicação dos princípios cooperativos pelas organizações cooperativas e seus efeitos no desenvolvimento da comunidade onde estão inseridas, em estudo de caso realizado no município de Três Pontas, Minas Gerais. Após análise dos dados quantitativos e qualitativos, verificou-se que o cooperativismo trespontano apresenta inúmeras potencialidades que poderiam impulsionar um melhor desenvolvimento municipal, tanto pela atividade econômica exercida pelas cooperativas, como pelos projetos sociais que elas desenvolvem na vida associativa local. No entanto, não se aprecia sua articulação entre si e com as políticas públicas, de forma a conseguir um vigoroso desenvolvimento local

Low-Velocity Impacts on a Polymeric Foam for the Passive Safety Improvement of Sports Fields: Meshless Approach and Experimental Validation

Over the past few years, foam materials have been increasingly used in the passive safety of sport fields, to mitigate the risk of crash injury. Currently, the passive safety certification process of these materials represents an expensive and time-consuming task, since a considerable number of impact tests on material samples have to be carried out by an ad hoc testing apparatus. To overcome this difficulty and speed up the design process of new protective devices, a virtual model for the low-velocity impact behaviour of foam protective mats is needed. In this study a modelling approach based on the mesh-free Element Galerkin method was developed to investigate the impact behaviour of ethylene-vinyl acetate (EVA) foam protective mats. The main advantage of this novel technique is that the difficulties related to the computational mesh distortion and caused by the large deformation of the foam material are avoided and a good accuracy is achieved at a relatively low computational cost. The numerical model was validated statistically by comparing numerical and experimental acceleration data acquired during a series of impact events on EVA foam mats of various thicknesses. The findings of this study are useful for the design and improvement of foam protective devices and allow for optimizing sports fields’ facilities by reducing head injury risk by a reliable computational method

Wind of change: Better air for microbial environmental control

Background: The COVID19 epidemic highlighted the importance of air in the transmission of pathogens. Air disinfection is one of the key points to reduce the risk of transmission both in the health sector and in public, civil and industrial environments. All bacteria and viruses tested to date can be inactivated by UV-C rays. Laboratory tested UV-C systems are increasingly popular and proposed as effective technologies for air purification; few studies have evaluated their performance in populated indoor environments. The aim of this investigation was to evaluate the effectiveness of a UV-C disinfection system for air in a real working context. Methods: This experimental study was conducted between December 2020 and February 2021 in an office of the Department of Molecular and Developmental Medicine of the University of Siena, Italy. A pre-final version air purifier (Cleaning Air T12), capable of treating 210 m3/h of air, was first tested for its ability to filter particulates and reduce microbial air contamination in the absence of people. Subsequently, the experiments were conducted in the presence of 3–5 subjects who worked for several hours in an office. During the tests, microbiological samples of air were collected in real time, switching the system on and off periodically. Air samples were collected and incubated on Petri dishes at 36 ◦C and 22 ◦C. Statistical analysis was performed with Stata 16 software assuming a significance level of 95%. An interpolating model was identified to describe the dynamics of contamination reduction when the device operates. Results: Preliminary tests showed a significant 62.5% reduction in Colony-Forming Units (CFUs) with 36 ◦C incubation. Reductions in the particulate component were also observed. In the main test, comparison of CFU data, between the device-on phase (90 min) and the subsequent device-off phase (60 min), showed statistically significant increase (p = 0.001) of environmental contamination passing from a mean of 86.6 (65.8–107.4) to 171.1 (143.9–198.3) CFU/m3, that is a rise of about 100%. The interpolating model exhibited a good fit of CFU reduction trend with the device on. Conclusions: The system, which mainly uses UV-C lamps for disinfection, was able to significantly reduce envi- ronmental and human contamination in real time. Experimental tests have shown that as soon as the device is switched off, after at least half an hour of operation, the healthiness of the air decreases drastically within 10 minutes, bringing the airborne microbial contamination (induced by the presence of operators in the environ- ment) to levels even higher than 150% of the last value with the device on. Re-engineering strategies for system improvement were also discusse

One year of CNR-IMAA multi-wavelength Raman lidar measurements in coincidence with CALIPSO overpasses: Level 1 products comparison

At CNR-IMAA, an aerosol lidar system has operated since May 2000 in the framework of EARLINET (European Aerosol Research Lidar Network), the first lidar network for tropospheric aerosol study on a continental scale. High quality multi-wavelength measurements make this system a reference point for the validation of data products provided by CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations), the first satellite-borne lidar specifically designed for aerosol and cloud study. Since 14 June 2006, dedicated measurements have been performed at CNR-IMAA in coincidence with CALIPSO overpasses. For the first time, results on 1-year comparisons between ground-based multi-wavelength Raman lidar measurements and corresponding CALIPSO lidar Level 1 profiles are presented. A methodology for the comparison is presented and discussed in detail. Night-time cases are considered to take advantage from Raman capability of the ground based lidar. Cases with the detection of cirrus clouds in CALIPSO data are separately analysed for taking into account multiple scattering effects. For cirrus cloud cases, few cases are available to draw any conclusions. For clear sky conditions, the comparison shows good performances of the CALIPSO on-board lidar: the mean relative difference between the ground-based and CALIPSO Level 1 measurements is always within its standard deviation at all altitudes, with a mean difference in the 3–8 km altitude range of (−2±12)%. At altitude ranges corresponding to the typical PBL height observed at CNR-IMAA, a mean difference of (−24±20)% is observed in CALIPSO data, probably due to the difference in the aerosol content at the location of PEARL and CALIPSO ground-track location. Finally, the mean differences are on average lower at all altitude ranges for the closest overpasses (at about 40 km) respect to the 80-km overpasses