Antimicrobial resistance, virulence factorsand genetic lineages of hospital-onsetmethicillin-resistant Staphylococcus aureus isolates detected in a hospital in Zaragoza

Introduction MRSA population dynamics is undergoing significant changes, and for this reason it is important to know which clones are circulating in our nosocomial environment. Materials and methods A total of 118 MRSA isolates were collected from clinical samples from patients with previous hospital or healthcare contact (named as hospital-onset MRSA (HO-MRSA)) during a one year period. Susceptibility testing was performed by disk diffusion and microdilution. The presence of resistance genes and virulence factors were tested by PCR. All isolates were typed by SCCmec, spa and agr typing. PFGE and MLST were applied to a selection of them. Results Eighty-three HO-MRSA isolates (70.3%) were resistant to any antibiotic included in the macrolide–lincosamide–streptogramin B group. Among these isolates, the M phenotype was the most frequent (73.5%). One hundred and seven of HO-MRSA isolates (90.7%) showed aminoglycoside resistance. The combination aac(6')-Ie-aph(2")-Ia + ant(4')-Ia genes was the most frequent (22.4%). Tetracycline resistance rates in HO-MRSA isolates were low (3.4%), although a high level of mupirocin resistance was observed (25.4%). Most of the HO-MRSA isolates (approximately 90%) showed SCCmec type IVc and agr type II. Fifteen unrelated pulsotypes were identified. CC5 was the most prevalent (88.1%), followed by CC8 (5.9%), CC22 (2.5%), CC398 (2.5%) and CC1 (0.8%). Conclusion CC5/ST125/t067 lineage was the most frequent. This lineage was related to aminoglycoside resistance, and to a lesser extent, with macrolide resistance. The presence of international clones as EMRSA-15 (CC22/ST22), European clones as CC5/ST228, community clones related to CC1 or CC8 and livestock associated clones, as CC398, were observed in a low percentage

Two decades of carbonate budget change on shifted coral reef assemblages: are these reefs being locked into low net budget states?

This is the author accepted manuscript. The final version is available from the Royal Society via the DOI in this recordThe ecology of coral reefs is rapidly shifting from historical baselines. One key-question is whether under these new, less favorable ecological conditions, coral reefs will be able to sustain key geo-ecological processes such as the capacity to accumulate carbonate structure. Here, we use data from 34 Caribbean reef sites to examine how the carbonate production, net erosion, and net carbonate budgets, as well as the organisms underlying these processes, have changed over the past 15 years in the absence of further severe acute disturbances. We find that despite fundamental benthic ecological changes, these ecologically shifted coral assemblages have exhibited a modest but significant increase in their net carbonate budgets over the past 15 years. However, contrary to expectations this trend was driven by a decrease in erosion pressure, largely resulting from changes in the abundance and size-frequency distribution of parrotfishes, and not by an increase in rates of coral carbonate production. Although in the short term the carbonate budgets seem to have benefitted marginally from reduced parrotfish erosion, the absence of these key substrate grazers, particularly of larger individuals, is unlikely to be conducive to reef recovery and will thus likely lock these reefs into low budget states.Universidad Nacional Autónoma de MéxicoRoyal SocietyMexican Council of Science and Technology (CONACYT

Tailoring block copolymer nanoporous thin films with acetic acid as a small guest molecule

Block copolymers offer the fabrication of mesoporous thin films with distinct nanoscale structural features. In this contribution, we present the use of acetic acid (CH3COOH) as a low‐molecular‐weight guest molecule to tune the supramolecular assembly of poly[styrene‐block‐(4‐vinylpyridine)] (PS‐b‐P4VP), offering a versatile and straightforward method to obtain tailored nanostructured films with controlled topography and pore size. Spin‐coating toluene solutions of PS‐b‐P4VP, with a variable amount of CH3COOH, leads to micellar thin films, where the micelles contain the carboxylic acid as a guest molecule. The size can be conveniently modified in these films (from 48 to 75 nm) by varying the amount of organic acid in the starting solutions. Subsequent surface reconstruction of micellar films using ethanol leads to ring‐shaped copolymer nanoporous films with modulated diameter. Controlling the micelle reconstruction process, cylindrical porous films are also obtained. Interestingly, changing the type of aliphatic carboxylic acid leads to a modification of the observed film morphology from micelles to out‐of‐plane P4VP cylinders (or lamellae) in a PS matrix

Effort estimation of FLOSS projects: A study of the Linux kernel

This is the post-print version of the Article. The official published version can be accessed from the link below - Copyright @ 2011 SpringerEmpirical research on Free/Libre/Open Source Software (FLOSS) has shown that developers tend to cluster around two main roles: “core” contributors differ from “peripheral” developers in terms of a larger number of responsibilities and a higher productivity pattern. A further, cross-cutting characterization of developers could be achieved by associating developers with “time slots”, and different patterns of activity and effort could be associated to such slots. Such analysis, if replicated, could be used not only to compare different FLOSS communities, and to evaluate their stability and maturity, but also to determine within projects, how the effort is distributed in a given period, and to estimate future needs with respect to key points in the software life-cycle (e.g., major releases). This study analyses the activity patterns within the Linux kernel project, at first focusing on the overall distribution of effort and activity within weeks and days; then, dividing each day into three 8-hour time slots, and focusing on effort and activity around major releases. Such analyses have the objective of evaluating effort, productivity and types of activity globally and around major releases. They enable a comparison of these releases and patterns of effort and activities with traditional software products and processes, and in turn, the identification of company-driven projects (i.e., working mainly during office hours) among FLOSS endeavors. The results of this research show that, overall, the effort within the Linux kernel community is constant (albeit at different levels) throughout the week, signalling the need of updated estimation models, different from those used in traditional 9am–5pm, Monday to Friday commercial companies. It also becomes evident that the activity before a release is vastly different from after a release, and that the changes show an increase in code complexity in specific time slots (notably in the late night hours), which will later require additional maintenance efforts

Environmentally friendly analysis of emerging contaminants by pressurized hot water extraction-stir bar sorptive extraction-derivatization and gas chromatography-mass spectrometry

This work describes the development, optimiza- tion, and validation of a new method for the simultaneous determination of a wide range of pharmaceuticals (beta- blockers, lipid regulators ... ) and personal care products (fragrances, UV filters, phthalates ... ) in both aqueous and solid environmental matrices. Target compounds were extracted from sediments using pressurized hot water ex- traction followed by stir bar sorptive extraction. The first stage was performed at 1,500 psi during three static extrac- tion cycles of 5 min each after optimizing the extraction temperature (50 – 150 °C) and addition of organic modifiers (% methanol) to water, the extraction solvent. Next, aqueous extracts and water samples were processed using polydime- thylsiloxane bars. Several parameters were optimized for this technique, including extraction and desorption time, ionic strength, presence of organic modifiers, and pH. Fi- nally, analytes were extracted from the bars by ultrasonic irradiation using a reduced amount of solvent (0.2 mL) prior to derivatization and gas chromatography – mass spectrome- try analysis. The optimized protocol uses minimal amounts of organic solvents (<10 mL/sample) and time ( ≈ 8 h/sam- ple) compared to previous ex isting methodologies. Low standard deviation (usually below 10 %) and limits of de- tection (sub-ppb) vouch for the applicability of the method- ology for the analysis of target compounds at trace levels. Once developed, the method was applied to determin

A population-based controlled experiment assessing the epidemiological impact of digital contact tracing

While Digital contact tracing (DCT) has been argued to be a valuable complement to manual tracing in the containment of COVID-19, no empirical evidence of its effectiveness is available to date. Here, we report the results of a 4-week population-based controlled experiment that took place in La Gomera (Canary Islands, Spain) between June and July 2020, where we assessed the epidemiological impact of the Spanish DCT app Radar Covid. After a substantial communication campaign, we estimate that at least 33% of the population adopted the technology and further showed relatively high adherence and compliance as well as a quick turnaround time. The app detects about 6.3 close-contacts per primary simulated infection, a significant percentage being contacts with strangers, although the spontaneous follow-up rate of these notified cases is low. Overall, these results provide experimental evidence of the potential usefulness of DCT during an epidemic outbreak in a real population

Comparison of outcomes following a cytological or histological diagnosis of malignant mesothelioma

Background: Survival with the epithelioid subtype of malignant mesothelioma (MM) is longer than the biphasic or sarcomatoid subtypes. There is concern that cytology-diagnosed epithelioid MM may underdiagnose the biphasic subtype. This study examines survival differences between patients with epithelioid MM diagnosed by cytology only and other subtypes diagnosed by histology. Methods: Demographics, diagnosis method, MM subtype and survival were extracted from the Western Australia (WA) Mesothelioma Registry, which records details of all MM cases occurring in WA. Results: A total of 2024 MM cases were identified over 42 years. One thousand seven hundred forty-four (86.2%) were male, median (IQR) age was 68.6 (60.4–77.0) years. A total of 1212 (59.9%) cases were identified as epithelioid subtype of which 499 (41.2%) were diagnosed using fluid cytology only. Those with a cytology-only diagnosis were older than the histology group (median 70.2 vs 67.6 years, P<0.001), but median survival was similar (cytology 10.6 (5.5–19.2) vs histology 11.1 (4.8–19.8) months, P=0.727) and Cox regression modelling adjusting for age, sex, site and time since first exposure showed no difference in survival between the different diagnostic approaches. Conclusions: Survival of cytologically and histologically diagnosed epithelioid MM cases does not differ. A diagnostic tap should be considered adequate to diagnose epithelioid MM without need for further invasive testing

Microwave-assisted hydrolysis and extraction of tricyclic antidepressants from human hair

The objective of this research was to develop, optimize, and validate a modern, rapid method of preparation of human hair samples, using microwave irradiation, for analysis of eight tricyclic antidepressants (TCADs): nordoxepin, nortriptyline, imipramine, amitriptyline, doxepin, desipramine, clomipramine, and norclomipramine. It was based on simultaneous alkaline hair microwave-assisted hydrolysis and microwave-assisted extraction (MAH–MAE). Extracts were analyzed by high-performance liquid chromatography with diode-array detection (HPLC–DAD). A mixture of n-hexane and isoamyl alcohol (99:1, v/v) was used as extraction solvent and the process was performed at 60°C. Application of 1.0 mol L−1 NaOH and microwave irradiation for 40 min were found to be optimum for hair samples. Limits of detection ranged from 0.3 to 1.2 μg g−1 and LOQ from 0.9 to 4.0 μg g−1 for the different drugs. This enabled us to quantify them in hair samples within average therapeutic concentration ranges

Roadmap to DILI research in Europe. A proposal from COST action ProEuroDILINet

\ua9 2024 The AuthorsIn the current article the aims for a constructive way forward in Drug-Induced Liver Injury (DILI) are to highlight the most important priorities in research and clinical science, therefore supporting a more informed, focused, and better funded future for European DILI research. This Roadmap aims to identify key challenges, define a shared vision across all stakeholders for the opportunities to overcome these challenges and propose a high-quality research program to achieve progress on the prediction, prevention, diagnosis and management of this condition and impact on healthcare practice in the field of DILI. This will involve 1. Creation of a database encompassing optimised case report form for prospectively identified DILI cases with well-characterised controls with competing diagnoses, biological samples, and imaging data; 2. Establishing of preclinical models to improve the assessment and prediction of hepatotoxicity in humans to guide future drug safety testing; 3. Emphasis on implementation science and 4. Enhanced collaboration between drug-developers, clinicians and regulatory scientists. This proposed operational framework will advance DILI research and may bring together basic, applied, translational and clinical research in DILI