Investigation of input and output energy for wheat production : a comprehensive study for Tehsil Mailsi (Pakistan)

The global increasing food demand can be met by efficient energy utilization in mechanized agricultural productions. In this study, input–output energy flow along with CO2 emissions for different wheat production cases (C-I to C-V) were investigated to identify the one that is most energy-efficient and environment-friendly case. Data and information about input and output sources were collected from farmers through questionnaires and face-to-face interviews. Input and output sources were converted into energy units by energy equivalents while CO2 emissions were calculated by emission equivalents. Data envelopment analysis (DEA) was conducted to compare technical efficiencies of the developed cases for optimization of inputs in inefficient cases. Results revealed that case C-Ⅴ (higher inputs, larger fields, the tendency of higher fertilizer application and tillage operations) has the highest energy inputs and outputs than the rest of the cases. Moreover, it possesses the lowest energy use efficiency and energy productivity. The highest CO2 emissions (1548 kg-CO2/ha) referred to C-Ⅴ while lowest emissions per ton of grain yield were determined in C-Ⅳ (higher electricity water pumping, moderate energy input). The grain yield increases directly with input energy in most of the cases, but it does not guarantee the highest values for energy indices. C-Ⅲ (moderate irrigations, educated farmers, various fertilizer applications) was found as an optimum case because of higher energy indices like energy use efficiency of 4.4 and energy productivity of 153.94 kg/GJ. Optimum input and better management practices may enhance energy proficiency and limit the traditionally uncontrolled CO2 emissions from wheat production. Therefore, the agricultural practices performed in C-Ⅲ are recommended for efficient cultivation of wheat in the studied area.The global increasing food demand can be met by efficient energy utilization in mechanized agricultural productions. In this study, input–output energy flow along with CO2 emissions for different wheat production cases (C-I to C-V) were investigated to identify the one that is most energy-efficient and environment-friendly case. Data and information about input and output sources were collected from farmers through questionnaires and face-to-face interviews. Input and output sources were converted into energy units by energy equivalents while CO2 emissions were calculated by emission equivalents. Data envelopment analysis (DEA) was conducted to compare technical efficiencies of the developed cases for optimization of inputs in inefficient cases. Results revealed that case C-Ⅴ (higher inputs, larger fields, the tendency of higher fertilizer application and tillage operations) has the highest energy inputs and outputs than the rest of the cases. Moreover, it possesses the lowest energy use efficiency and energy productivity. The highest CO2 emissions (1548 kg-CO2/ha) referred to C-Ⅴ while lowest emissions per ton of grain yield were determined in C-Ⅳ (higher electricity water pumping, moderate energy input). The grain yield increases directly with input energy in most of the cases, but it does not guarantee the highest values for energy indices. C-Ⅲ (moderate irrigations, educated farmers, various fertilizer applications) was found as an optimum case because of higher energy indices like energy use efficiency of 4.4 and energy productivity of 153.94 kg/GJ. Optimum input and better management practices may enhance energy proficiency and limit the traditionally uncontrolled CO2 emissions from wheat production. Therefore, the agricultural practices performed in C-Ⅲ are recommended for efficient cultivation of wheat in the studied area.King Saud University, Riyadh, Saudi Arabi

Monetary Policy and Financial Asset Prices: Empirical Evidence From Pakistan

Monetary transmission mechanism assumed to be significantly influenced by the effect of policy decisions on financial markets. However, various previous studies have come up with different outcomes. The purpose of this study is to examine the impact of monetary policy on different asset classes (shares and bonds) in Pakistan. This study using stock price and bond yield as dependent variable and discount rate, money supply, inflation, and exchange rate are independent variables. Data of all variables have collected from 2010 to 2016, and Vector Autoregressive (VAR) technique has applied. The empirical results indicate that there is an impact of monetary policy components on both stock and bond market as an increase in policy rate causes decline in stocks prices and bonds yields. The findings of this study will help the potential investors in making long-term (in general) and short-term (in particular) investment strategies concerning monetary policy.DOI: 10.15408/sjie.v7i2.709

Targeted Delivery of Insulin by Psyllium Plant (Plantago ispaghula) based hydrogels/membranes

Developments in therapeutics are the need of hour for the benefit of mankind and to increase the quality of life. Diabetes mellitus is a non-curable disease affecting a great amount of world’s population. This genetic disorder gets worse with time and ultimately leads to various complications like renal failure, lower limb amputation, heart diseases and blindness. Hydrogels for quite recent time are being used for the drug delivery. The present article is related to the fabrication of psyllium based dermal patches insulin drug delivery system that could release insulin in a sustained and controlled manner. Psyllium, a natural polysaccharide, is a medicinally important dietary fiber and drug delivery system has developed a novel insulin loaded psyllium based hydrogels for glucose lowering. They can be used for the transdermal delivery of insulin as hypodermic administration of insulin is painful, complicated, can also results in allergic reactions and infections. For the sustained and steady release of insulin from fabricated hydrogels were also modified with the addition of graphene oxide nanoparticles. To study the structural aspects of these various polymeric networks thus formed were characterized with FTIR (Fourier-transform infrared spectroscopy) and SEM (Scanning electron microscopy) which identifies the interaction/bonding among different functional groups and also indicating the layer of graphene oxide nanoparticles on the surface of hydrogels stage and release related experiments such as degradability, swelling kinetics, swelling ratio and drug kinetics were also performed. Because of its functionalization these unique 3D drug loaded polymeric hydrogels will have the double prospective of diabetes. Different types of psyllium based hydrogels were prepared, and the effect of ph on the release dynamics of insulin from drug loaded hydrogels has been studied to evaluate the drug release mechanism in-vitro and in-vivo. For in-vivo study avian skin was used a model. Fickian diffusion mechanism has been observed for the release of insulin at different ph both in and in-vivo and therefore these drug loaded hydrogels can be potentially used to develop pH-sensitive systems. Keeping in view the results of different analysis it can be concluded that these hydrogels can prove to be very useful for the treatment of diabetes mellitus

Evaporation-induced self-assembly of gold nanorods on a hydrophobic substrate for surface enhanced Raman spectroscopy applications

The controllable assembly of plasmonic nanoparticles has developed as one of the most significant approaches for surface enhanced Raman spectroscopy (SERS) applications. This study developed a simple approach to improve a large-scale ordered assembly of gold nanorods (GNRs) by controlling the droplet evaporation mode on hydrophobic substrates. The hydrophobic substrate was efficiently produced by spin coating the silicone oil onto the glass slides and annealing them. The analyte molecule rhodamine (R6G) was employed as a surface-enhanced Raman scattering probe to demonstrate the potential effects of the synthesized arrays. This hydrophobic platform enables the concentration and delivery of analyte molecules into the surface enhanced Raman spectroscopy sensitive site while suppressing the coffee ring effect generated by the smooth contraction motion of the base contact radius of the droplet without any pinning. Thus, the limit of detection (LOD) of the R6G analyte was lowered to 10−10 M and the homogenous dispersion of surface enhanced Raman spectroscopy hotspots within the self-assembly reproducible surface enhanced Raman spectroscopy signal. This new method enables a broad range of packing patterns and mechanisms by changing the host nanoparticles in the dispersion

Role of proline, K/Na ratio and chlorophyll content in salt tolerance of wheat (Triticum aestivum

Abstract Studies to determine the role of proline, K/Na ratio and chlorophyll contents in salt tolerance of wheat genotypes were conducted in lysimeters using hydroponics technique. Seeds were allowed to germinate under normal condition (1.5 dS m -1 ) and salinity treatment of 12 dS m -1 was imposed after one week of germination. Crop was irrigated at the interval of two weeks or whenever required with 1/4 th Hoagland nutrient solution of respective concentrations. Results clearly indicated that wheat genotypes with higher proline, K/Na ratio and chlorophyll contents had higher grain yield. On the basis of yield reduction, three genotypes viz. Lu-26s, Sarsabz and KTDH were found tolerant. These genotypes also maintained the higher concentration of proline, K/Na ratio and chlorophyll contents under saline conditions

Synthesis and characterization of cellulose/hydroxyapatite based dental restorative composites

The aim of this study was anin-situsynthesis of hydroxyapatite (HA) on cellulose fibers to be used as a new reinforcing agent for dental restorations. The microwave irradiation method was used for synthesis and the materials were characterized with analytical techniques. The prepared dental resin composites were mechanically tested by a universal testing machine and electrodynamic fatigue testing system. FTIR, XRD, SEM/EDS analysis confirmed the successful synthesis of HA on cellulose fibers. The Alamar blue biocompatibility assay showed more than 90% cell viability for the prepared cellulose/HA. The mechanical properties of resin composites improved with cellulose content from 30 wt.% to 50 wt.% in the polymer matrix. Substantially, increasing the cellulose/HA content from 40% to 50% improved the mechanical properties. The results suggested that HA could be successfully synthesized on cellulose fibers using microwave irradiation and contributed to improving the mechanical properties of dental resin composites

Expression of core antigen of HCV genotype 3a and its evaluation as screening agent for HCV infection in Pakistan

<p>Abstract</p> <p>Background</p> <p>Pakistan is facing a threat from hepatitis C infection which is increasing at an alarming rate throughout the country. More specific and sensitive screening assays are needed to timely and correctly diagnose this infection.</p> <p>Methods</p> <p>After RNA extraction from specimen (HCV-3a), cDNA was synthesized that was used to amplify full length core gene of HCV 3a. After verification through PCR, DNA sequencing and BLAST, a properly oriented positive recombinant plasmid for core gene was digested with proper restriction enzymes to release the target gene which was then inserted downstream of GST encoding DNA in the same open reading frame at proper restriction sites in multiple cloning site of pGEX4t2 expression vector. Recombinant expression vector for each gene was transformed in <it>E. coli </it>BL21 (DE3) and induced with IPTG for recombinant fusion protein production that was then purified through affinity chromatography. Western blot and Enzyme Linked Immunosorbant Assay (ELISA) were used to detect immuno-reactivity of the recombinant protein.</p> <p>Results</p> <p>The HCV core antigen produced in prokaryotic expression system was reactive and used to develop a screening assay. After validating the positivity (100%) and negativity (100%) of in-house anti-HCV screening assay through a standardized panel of 200 HCV positive and 200 HCV negative sera, a group of 120 serum specimens of suspected HCV infection were subjected to comparative analysis of our method with commercially available assay. The comparison confirmed that our method is more specific than the commercially available assays for HCV strains circulating in this specific geographical region of the world and could thus be used for HCV screening in Pakistan.</p> <p>Conclusion</p> <p>In this study, we devised a screening assay after successful PCR amplification, isolation, sequencing, expression and purification of core antigen of HCV genotype 3a. Our developed screening assay is more sensitive, specific and reproducible than the commercially available screening assays in Pakistan.</p

Operational experience with the GEM detector assembly lines for the CMS forward muon upgrade

The CMS Collaboration has been developing large-area triple-gas electron multiplier (GEM) detectors to be installed in the muon Endcap regions of the CMS experiment in 2019 to maintain forward muon trigger and tracking performance at the High-Luminosity upgrade of the Large Hadron Collider (LHC); 10 preproduction detectors were built at CERN to commission the first assembly line and the quality controls (QCs). These were installed in the CMS detector in early 2017 and participated in the 2017 LHC run. The collaboration has prepared several additional assembly and QC lines for distributed mass production of 160 GEM detectors at various sites worldwide. In 2017, these additional production sites have optimized construction techniques and QC procedures and validated them against common specifications by constructing additional preproduction detectors. Using the specific experience from one production site as an example, we discuss how the QCs make use of independent hardware and trained personnel to ensure fast and reliable production. Preliminary results on the construction status of CMS GEM detectors are presented with details of the assembly sites involvement

Prevalence of HCV and HIV infections in 2005-Earthquake-affected areas of Pakistan

<p>Abstract</p> <p>Background</p> <p>On October 8, 2005, an earthquake of magnitude 7.6 hit the Northern parts of Pakistan. In the post-earthquake scenario, overcrowding, improper sewage disposal, contamination of food and drinking water, hasty surgical procedures, and unscreened blood transfusions to earthquake victims most likely promotes the spread of infections already prevalent in the area.</p> <p>Objective</p> <p>The objective of the study reported here was to determine the prevalence of Human Immunodeficiency and Hepatitis C viruses (respectively, HIV and HCV) in the earthquake-affected communities of Pakistan. The samples were analyzed 2 months and then again 11 months after the earthquake to estimate the burden of HIV and HCV in these areas, and to determine any rise in the prevalence of these viral infections as a result of the earthquake.</p> <p>Methods</p> <p>Blood samples were initially collected during December, 2005 to March 2006, from 245 inhabitants of the earthquake-affected areas. These samples were screened for HCV and HIV, using immunochromatography and Enzyme-Linked Immuno-Sorbent Assay (ELISA).</p> <p>Results</p> <p>Out of 245 samples tested, 8 (3.26%) were found positive for HCV, and 0 (0.0%) for HIV, indicating the existence of HCV infection in the earthquake-stricken areas. The same methods were used to analyze the samples collected in the second round of screening in the same area, in September, 2006 – 11 months after the earthquake. This time 290 blood samples were collected, out of which 16 (5.51%) samples were positive for HCV, and 0 for HIV.</p> <p>Conclusion</p> <p>A slightly higher prevalence of HCV was recorded 11 months after the earthquake; this increase, however, was not statistically significant. None of the study participants was found HIV-infected.</p