Jointly Optimal Spatial Channel Assignment and Power Allocation for MIMO SWIPT Systems

The joint design of spatial channel assignment and power allocation in multiple input multiple output (MIMO) systems capable of simultaneous wireless information and power transfer is studied. Assuming availability of channel state information at both communications ends, we maximize the harvested energy at the multi-antenna receiver, while satisfying a minimum information rate requirement for the MIMO link. We first derive the globally optimal eigenchannel assignment and power allocation design, and then present a practically motivated tight closed-form approximation for the optimal design parameters. Selected numerical results verify the validity of the optimal solution and provide useful insights on the proposed designs as well as the Pareto-optimal rate-energy tradeoff

Energy-Aware mode selection for throughput maximization in RF-Powered D2D Communications

Doubly-near-far problem in RF-powered networks can be mitigated by choosing appropriate device-To-device (D2D) communication mode and implementing energy-efficient information transfer (IT). In this work, we present a novel RF energy harvesting architecture where each transmitting-receiving user pair is allocated a disjoint channel for its communication which is fully powered by downlink energy transfer (ET) from hybrid access point (HAP). Considering that each user pair can select either D2D or cellular mode of communication, we propose an optimized transmission protocol controlled by the HAP that involves harvested energy-Aware jointly optimal mode selection (MS) and time allocation (TA) for ET and IT to maximize the sum-Throughput. Jointly global optimal solutions are derived by efficiently resolving the combinatorial issue with the help of optimal MS strategy for a given TA for ET. Closed-form expressions for the optimal TA in D2D and cellular modes are also derived to gain further analytical insights. Numerical results show that the joint optimal MS and TA, which significantly outperforms the benchmark schemes in terms of achievable RF-powered sum-Throughput, is closely followed by the optimal TA scheme for D2D users. In fact, about 2/3 fraction of the total user pairs prefer to follow the D2D mode for efficient RF-powered IT

The deleted in brachydactyly B domain of ROR2 is required for receptor activation by recruitment of Src

The transmembrane receptor 'ROR2' resembles members of the receptor tyrosine kinase family of signalling receptors in sequence but its' signal transduction mechanisms remain enigmatic. This problem has particular importance because mutations in ROR2 are associated with two human skeletal dysmorphology syndromes, recessive Robinow Syndrome (RS) and dominant acting Brachydactyly type B (BDB). Here we show, using a constitutive dimerisation approach, that ROR2 exhibits dimerisation-induced tyrosine kinase activity and the ROR2 C-terminal domain, which is deleted in BDB, is required for recruitment and activation of the non-receptor tyrosine kinase Src. Native ROR2 phosphorylation is induced by the ligand Wnt5a and is blocked by pharmacological inhibition of Src kinase activity. Eight sites of Src-mediated ROR2 phosphorylation have been identified by mass spectrometry. Activation via tyrosine phosphorylation of ROR2 receptor leads to its internalisation into Rab5 positive endosomes. These findings show that BDB mutant receptors are defective in kinase activation as a result of failure to recruit Src

Complexity of coordinated beamforming and scheduling for OFDMA based heterogeneous networks

Coordination is foreseen to be an important component of future mobile radio networks. It is especially relevant in heterogeneous networks, where high power base stations produce strong interference to an underlying layer of low power base stations. This work investigates in detail the achievable performance gains for one coordination technique—coordinated beamforming. It reveals the main factors that influence the throughput of the mobile stations. These findings are combined with an analysis of the computational complexity. As a result, a heuristic algorithm is presented that achieves results close to an exhaustive search with significantly less calculations. Detailed simulation analysis is presented on a realistic network layout

Data-precoded algorithm for multiple-relay-assisted systems

A data-precoded relay-assisted (RA) scheme is proposed for a system cooperating with multiple relay nodes (RNs), each equipped with either a single-antenna or a two-antenna array. The classical RA systems using distributed space-time/frequency coding algorithms, because of the half-duplex constraint at the relays, require the use of a higher order constellation than in the case of a continuous link transmission from the base station to the user terminal. This implies a penalty in the power efficiency. The proposed precoding algorithm exploits the relation between QPSK and 4 L -QAM, by alternately transmitting through L relays, achieving full diversity, while significantly reducing power penalty. This algorithm explores the situations where a direct path (DP) is not available or has poor quality, and it is a promising solution to extend coverage or increase system capacity. We present the analytical derivation of the gain obtained with the data-precoded algorithm in comparison with distributed space-frequency block code (SFBC) ones. Furthermore, analysis of the pairwise error probability of the proposed algorithm is derived and confirmed with numerical results. We evaluate the performance of the proposed scheme and compare it relatively to the equivalent distributed SFBC scheme employing 16-QAM and non-cooperative schemes, for several link quality scenarios and scheme configurations, highlighting the advantages of the proposed scheme

2017 IEEE 7th International Workshop on Computational Advances in Multi-Sensor Adaptive Processing, CAMSAP 2017

We consider the problem of maximizing the harvested power in Multiple Input Multiple Output (MIMO) Simultaneous Wireless Information and Power Transfer (SWIPT) systems with power splitting reception. Different from recently proposed designs, we target with our novel problem formulation at the jointly optimal transmit precoding and receive uniform power splitting (UPS) ratio maximizing the harvested power, while ensuring that the Quality-of-Service (QoS) requirement of the MIMO link is satisfied. We assume generic practical Radio Frequency (RF) Energy Harvesting (EH) receive operation that results in a non-convex optimization problem for the design parameters, which we then solve optimally after formulating it in an equivalent generalized convex form. Our representative results including comparisons of achievable EH gains with benchmark schemes provide key insights on various system parameters

Bit Error Rate of Underlay Decode-and-Forward Cognitive Networks with Best Relay Selection

This paper provides an analytic performance evaluation of the bit error rate (BER) of underlay decode-and-forward cognitive networks with best relay selection over Rayleigh multipath fading channels. A generalized BER expression valid for arbitrary operational parameters is firstly presented in the form of a single integral, which is then employed for determining the diversity order and coding gain for different best relay selection scenarios. Furthermore, a novel and highly accurate closed-form approximate BER expression is derived for the specific case where relays are located relatively close to each other. The presented results are rather convenient to handle both analytically and numerically, while they are shown to be in good agreement with results from respective computer simulations. In addition, it is shown that as in the case of conventional relaying networks, the behaviour of underlay relaying cognitive networks with best relay selection depends significantly on the number of involved relays

Power minimizing mec offloading with qos constraints over ris-empowered communications

This work lies at the intersection of two cutting edge technologies envisioned to proliferate in future 6G wireless systems: Multi-access Edge Computing (MEC) and Reconfigurable Intelligent Surfaces (RISs). While the former will bring a powerful information technology environment at the wireless edge, the latter will enhance communication performance, thanks to the possibility of adapting wireless propagation as per end users' convenience, according to specific service requirements. We propose a joint optimization of radio, computing, and wireless environment reconfiguration through an RIS, with the goal of enabling low power computation offloading services with reliability guarantees. Going beyond previous works on this topic, multi-carrier frequency selective RIS elements' responses and wireless channels are considered. This opens new challenges in RIS optimization, accounting for frequency dependent RIS response profiles, which strongly affect RIS-aided wireless links and, as a consequence, MEC service performance. We formulate an optimization problem accounting for short and long-term constraints involving device transmit power allocation across multiple subcarriers and local computing resources, as well as RIS reconfiguration parameters according to a recently developed Lorentzian model. Besides a theoretical optimization framework, numerical results show the effectiveness of the proposed method in enabling low power reliable computation offloading over RISaided frequency selective channels

Receive Quadrature Reflecting Modulation for RIS-Empowered Wireless Communications

In this paper, we propose a novel reconfigurable intelligent surface (RIS)-based modulation scheme, named RIS-aided receive quadrature reflecting modulation (RIS-RQRM), by resorting to the concept of spatial modulation. In RIS-RQRM, the whole RIS is virtually partitioned into two halves to create signals with only in-phase (I-) and quadrature (Q-) components, respectively, and each half forms a beam to a receive antenna whose index carries the bit information. Furthermore, we design a low-complexity and non-coherent detector for RIS-RQRM, which measures the maximum power and polarities of the I- and Q- components of the received signals. Approximate bit error rate (BER) expressions are derived for RIS-RQRM over Rician fading channels. Simulation results show that RIS-RQRM outperforms the existing counterpart without I/Q index modulation in terms of BER in the low signal-to-noise ratio region