Study the Effect of Water Content on the Structure of Electrochemically Prepared TiO2 Nanotubes

In this research, the pure titanium foil was treated in glycerol base electrolyte with 0.7 wt.% NH4F and a small amount of H2O at 17 V for 2 hours by electrochemical anodization process in order to prepare Titania nanotube arrays at room temperature (~25 ºC), different water content was added to the electrolyte as a tube enhancing agent. The high density uniform arrays are prepared by using organized and well aligned these tubes. The average size of tube diameter, ranging from 57 to 92 nm which found it increases with increasing water content, and the length of the tube ranging from 2.76 to 4.12 µm, also found to increase with increasing water content and ranging in size of wall thickness from 23 to 35 nm. A possible growth mechanism is presented. The X-ray diffraction (XRD), atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to study the structure and morphology of the Titania films

Study of user effects on two-port MIMO antennas at 2.4 GHz and 5.8 GHz for Wi-Fi and WLAN applications

In this paper, two multiple input multiple output (MIMO) antennas for Wi-Fi/WLAN mobile applications are proposed. The designed two-port MIMO antennas are made up of planar inverted-F antennas (PIFAs). The antenna elements for both designs are symmetrical and placed on the short-edged corners of the substrate used, FR4. The performance of both antennas in the presence of user’s hand is compared in terms of impedance bandwidth and efficiency. An upward shift of up to 0.17 GHz in impedance bandwidth was found for 2.4 GHz and 5.8 GHz antenna. Due to the smaller size of antennas at 5.8 GHz compared to antennas at 2.4 GHz, the antennas are less obstructed by hands and thus the exhibited total efficiency of up to 45.58 % in the presence of human hand. The designed antennas have been fabricated for validation purpose. It is shown that there is a good agreement between simulated and measured results

Fixed-time adaptive chaotic control for permanent magnet synchronous motor subject to unknown parameters and perturbations

It is well known that the permanent magnet synchronous motor (PMSM) exhibits chaotic characteristics when its parameters fall within a certain range, which can lead to system instability. This article proposes an adaptive control strategy for achieving the fixed-time chaotic stabilization of PMSM, even in the presence of unknown parameters and perturbations. The developed controller is synthesized by combining a parametric adaptive mechanism with a fixed-time control technique. The stability analysis demonstrates that the system states under the developed controller can converge to small neighborhoods around the equilibrium point within a fixed time. Thanks to the adoption of the parametric adaptive mechanism, the developed controller is not only insensitive to unknown parameters but also robust against perturbations. Finally, simulated studies are conducted to verify and emphasize the effectiveness of the developed control strategy

DEVELOPMENT AND VALIDATION OF UV-VIS SPECTROSCOPIC METHOD OF ASSAY OF CARBAMAZEPINE IN MICROPARTICLES

Objective: This study aimed to develop a new, rapid, robust, effective, inexpensive, and accurate UV-Vis method for the quantification analysis of carbamazepine (CBZ) in the carbamazepine-loaded microparticles.Methods: CBZ was encapsulated in ethyl cellulose microparticles by a solvent evaporation method using polyvinyl alcohol (PVA) as a stabilizer. Methanol was used to dissolve CBZ followed by dilution with distilled water as diluent. CBZ drug, excipients, and microparticles were subjected to specificity, solution stability, linearity, precision and accuracy to confirm and ensure the validity of this method.Results: The results showed no interference from the excipients in the selected wavelength 286 nm. It was exhibited linearity in the range 2-12 μg/ml with R2 = 0.9992. CBZ solution was stable during 24 h. Accuracy and precision were within the accepted limits (100±2%). All results were in accordance to the ICH-Q2 guideline.Conclusion: As a conclusion, CBZ could be quantified from loaded EC microparticles using UV-Vis spectrophotometer at 286 nm. Therefore, this method can be used for the quantification analysis of CBZ in CBZ-loaded microparticles can be utilized also as an alternative method to calculate CBZ in different dosage forms.Â

Algorithm for Demand Response to Maximize the Penetration of Renewable Energy

n/

Overview On Surgical Management Of Overactive Bladder

Overactive bladder syndrome is a persistent and incapacitating disorder that has profound medical, psychological, and social implications, greatly impacting the wellbeing of countless individuals globally. A significant number of individuals experience urine urgency, which can be extremely bothersome. The primary indicator of overactive bladder (OAB) is a sense of urgency, often accompanied by increased urine frequency and nocturia. After ruling out other medical conditions with similar symptoms, the initial approach to managing OAB is providing guidance on fluid consumption and bladder training. If needed, antimuscarinic medicines may be added as a supplement. If patients have significant distress from OAB symptoms even after maximizing medicinal treatment, they may choose to undergo invasive procedures. There is currently a limited understanding of the hierarchical structure of central nervous system control. However, the use of functional imaging is starting to reveal the difficulties that need to be addressed in this area. Current research is exploring the use of botulinum neurotoxin-A injection, oral β3-adrenergic agonists, and innovative methods for nerve stimulation as potential therapies. The inherent subjectivity of urine urgency, the absence of animal models, and the complex pathophysiology of overactive bladder (OAB) pose substantial obstacles to achieving effective clinical therapy

ANTIMICROBIAL AND ANTIOXIDANT ACTIVITY OF PSIDIUM GUAJAVA. (GUAVA) MEDICINAL PLANT LEAVES USED IN FOLK MEDICINE FOR TREATMENT OF WOUNDS AND BURNS IN HUFASH DISTRICT AL MAHWEET GOVERNORATE–YEMEN

Objective: Psidium guajava (PG) belongs to the family Myrtaceae that is believed to have active components that help to treat conditions like malaria, gastroenteritis, vomiting, diarrhea, dysentery, wounds, ulcers, toothache, coughs, sore throat, inflamed gums, and a number of other condition. The objective of current study was phytochemical screening of chemical constituents of Psidium guajava extract.Methods: In this study methanolic and aqueous extracts of one plant namely Psidium guajava, were screened for the presence of phytochemical constituents and tested for their antimicrobial and antioxidant activity.Results: TLC tests conducted revealed Rf values in the leaves for alkaloids, Flavonoids, Tannins, Phenols and Saponins(0.96-0.97-0.99-0.97-0.99) respectively. The antimicrobial activity extracts against four bacterial isolates Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa and Klebsiella sp. and a single fungal isolate Candida albicans with concentrations (0.5 mg/ml, and 1,0 mg/ml) of the extract were added to the disc and respective solvent was used as negative control. The antioxidative activity of leaf was evaluated by using 1,1- diphenyl-2 picrylhydrazyl (DPPH), the results showed are 88.4%, highest from standard, ascorbic acid 87.5%.Conclusion: The qualitative phytochemical analysis revealed the results showed presence of alkaloids, terpenoids, glycosides, resins, saponins, tannins, flavonoids, phenols, and amino acid were present in the methanol extract, with absence of glycosides, and amino acids in the aqueous extracts in leaves plant.                               Peer Review History: Received 24 March 2019;   Revised 10 April; Accepted 20 April, Available online 15 May 2019 Academic Editor:  Dr. Iman Muhammad Higazy, National Research Center, Egypt, [email protected] UJPR follows the most transparent and toughest ‘Advanced OPEN peer review’ system. The identity of the authors and, reviewers will be known to each other. This transparent process will help to eradicate any possible malicious/purposeful interference by any person (publishing staff, reviewer, editor, author, etc) during peer review. As a result of this unique system, all reviewers will get their due recognition and respect, once their names are published in the papers. We expect that, by publishing peer review reports with published papers, will be helpful to many authors for drafting their article according to the specifications. Auhors will remove any error of their article and they will improve their article(s) according to the previous reports displayed with published article(s). The main of it is ‘to improve the quality of a candidate manuscript’. Our reviewers check the ‘strength and weakness of a manuscript honestly’. There will increase in the perfection, and transparency. Received file:                Reviewer's Comments: Average Peer review marks at initial stage: 5.5/10 Average Peer review marks at publication stage: 7.5/10 Reviewer(s) detail: Ahmad Najib, Universitas Muslim Indonesia, Makassar, Indonesia, [email protected] Dr. Md. Shahidul Islam, USTC, Chittagong, Bangladesh, [email protected] Similar Articles: PHYTOCHEMICAL ANALYSIS AND ANTIMICROBIAL ACTIVITY OF COLOCASIA ESCULENTA (TARO) MEDICINAL PLANT LEAVES USED IN FOLK MEDICINE FOR TREATMENT OF WOUNDS AND BURNS IN HUFASH DISTRICT AL MAHWEET GOVERNORATE–YEME

Organ-specific toxicity evaluation of stearamidopropyl dimethylamine (SAPDMA) surfactant using zebrafish embryos

Surfactants are widely used in the industry of detergents, household products, and cosmetics. SAPDMA is a cationic surfactant that is used mostly in cosmetics, conditioning agents and has recently gained attention as a corrosion inhibitor in the sea pipelines industry. In this regard, literature concerning the ecotoxicological classification of SAPDMA on aquatic animals is lacking. This study aims to evaluate the potential ecotoxicity of SAPDMA using the aquatic zebrafish embryo model. The potential toxic effects of SAPDMA were assessed by different assays. This includes (i) mortality/survival assay to assess the median lethal concentration (LC50); (ii) teratogenicity assay to assess the no observed effect concentration (NOEC); (iii) organ-specific toxicity assays including cardiotoxicity, neurotoxicity (using locomotion assay), hematopoietic toxicity (hemoglobin synthesis using o-dianisidine staining), hepatotoxicity (liver steatosis and yolk retention using Oil Red O (ORO) stain); (iv) cellular cytotoxicity (mitochondrial membrane potential) by measuring the accumulation of JC-1 dye into mitochondria. Exposure of embryos to SAPDMA caused mortality in a dose-dependent manner with a calculated LC50 of 2.3 mg/L. Thus, based on the LC50 value and according to the Fish and Wildlife Service (FWS) Acute Toxicity Rating Scale, SAPDMA is classified as “moderately toxic”. The No Observed Effect Concentration (NOEC) concerning a set of parameters including scoliosis, changes in body length, yolk, and eye sizes was 0.1 mg/L. At the same NOEC concentration (0.1 mg/L), no organ-specific toxicity was detected in fish treated with SAPDMA, except hepatomegaly with no associated liver dysfunctions. However, higher SAPDMA concentrations (0.8 mg/L) have dramatic effects on zebrafish organ development (eye, heart, and liver development). Our data recommend a re-evaluation of the SAPDMA employment in the industry setting and its strictly monitoring by environmental and public health agencies

Sickle Cell Illness Awareness among the General Public

Background: Lifelong ickle cell disease (SCD), a group of inherited blood disorders, afflicts millions of individuals. Sickle cell disease (SCD), with a global prevalence of 112 cases per 100,000 individuals, frequently gives rise to this condition. Sickle Cell Disease (SCD) exhibits a high prevalence in various regions, including Sub-Saharan Africa, Saudi Arabia, India, South and Central America, as well as the Mediterranean. We conducted a study in Tabuk, Saudi Arabia to assess the level of public knowledge and awareness of Sickle Cell Disease (SCD). Methods: The present study employed a cross-sectional observational design, encompassing a sample of 386 individuals residing in Tabuk, who were over the age of 18 and represented both genders and various nationalities. Demographic data and sickle cell disease awareness were obtained through the utilization of a structured questionnaire that was developed from previous research. Results: The present study included a total of 386 adults residing in Tabuk, Saudi Arabia, who satisfied the predetermined inclusion criteria. Among the participants, 47.4% fell between the age range of 18 to 25 years. The majority of participants had a satisfactory level of knowledge, with 24.1% of individuals aged 18-25, 10.1% of those aged 26-35, 7.3% and 6.55% of individuals aged 36-45, and a significant proportion of participants aged over 45. Conclusion: The survey participants demonstrated a satisfactory degree of understanding on the prevalence of sickle cell disease (SCD) in the Kingdom of Saudi Arabia (KSA).&nbsp

Power Generation from Utilizing Thermal Energy of Hazardous Waste Incinerators

A large amount of thermal energy is generated from burning hazardous chemical wastes, and the temperature of the flue gases in hazardous waste incinerators reaches up to (1200 °C). The flue gases are cooled to (40°C) and are treated before emission. This thermal energy can be utilized to produce electrical power by designing a system suitable for dangerous flue gases in the future depending on the results of much research about using a proto-type small steam power plant that uses safe fuel to study and develop the electricity generation process with water tube boiler which is manufactured experimentally with theoretical development for some of its parts which are inefficient in experimental work. The studied system generates theoretically (120 kg steam /h at 8 bars) with dry wood as fuel and preheating for the air of combustion and feed water and a diesel engine of (8 hp) four-stroke with single piston converted to steam engine coupled with the electrical generator of (3 kVA). The results are compared with practical values valid in the literature about small power plants of steam capacity (0.1-1) ton/h and operating pressure up to 10 bars. Experimentally, the generated electrical power is little and sufficient to operate a small fan and lump. The current converted steam engine is better than a conventional steam engine in auto lubrication with some operational problems. The boiler efficiency is 63.28%