Analysis of Tool Wear and Counter Surface Roughness in the Flexible Abrasive Tool Finishing

This work uses the solvent casting method to fabricate an elastomeric tool with polyurethane as the base material and silicon carbide (SiC) as embedded abrasive particles. The distribution of abrasive particles and the pore structure in the fabricated tools are analyzed. The fabricated tools are porous in nature and have self-replenishing as well as self-lubrication properties. Aluminum 6061 alloy and electroless nickel-phosphorus plating having different initial roughness are selected as workpieces to study the wear mechanisms and loading of the flexible abrasive tool. The rotational speed of the tool, tool compression, and feed rate are fixed input process parameters. Total finishing time, sliding distance, and roughness are varied to obtain output responses. The workpiece material is also taken into account as a variable parameter in this study. These materials are classified as different counter surfaces as their surface roughness and mechanical properties vary. The finishing time and sliding distance for these counter surfaces differ in order to relate their effects on tool wear and loading. The nickel-plated surface shows a higher percentage reduction in surface roughness of 92% as compared to the aluminum surface, with a 62% reduction in surface roughness. The coefficient of friction, wear, and tool condition are analyzed to understand the mechanism of tool wear and tool loading. In this process, both two-body and three-body abrasions occur simultaneously and continuously

Magnetorheological Finishing of Chemically Treated Electroless Nickel Plating

Electroless nickel plating with a nanofinished surface is used in space mirrors, automobile parts, aircraft components, optical instruments, and electronic equipment. Finishing of these components using conventional finishing techniques is limited due to size, shape, material, and process constraints. This work reports the nanofinishing of electroless nickel-plated surfaces using a magnetorheological finishing process where the surfaces are pre-treated with chemicals. The chemicals used in this work are hydrogen peroxide (H2O2) and hydrofluoric acid (HF). The effect of exposure time and concentration on the microhardness and roughness is studied to understand the surface chemistry after chemical treatment. The hydrogen peroxide forms a passivated layer, and it helps in easy material removal. Hydrofluoric acid improves surface quality and also helps in the removal of contaminants. The finished surface is characterized to understand the effect of chemical treatment on the finishing rate and surface topography. Normal and tangential forces are mainly affected by the hardness and surface condition after the chemical treatment. The best combination of parameters (chemical treatment with 1% HF for 30 min) was obtained and finishing was carried out to obtain a nanofinished surface with its areal surface roughness (Sa) reduced to 10 nm

Magnetorheological Finishing of Chemically Treated Electroless Nickel Plating

Electroless nickel plating with a nanofinished surface is used in space mirrors, automobile parts, aircraft components, optical instruments, and electronic equipment. Finishing of these components using conventional finishing techniques is limited due to size, shape, material, and process constraints. This work reports the nanofinishing of electroless nickel-plated surfaces using a magnetorheological finishing process where the surfaces are pre-treated with chemicals. The chemicals used in this work are hydrogen peroxide (H2O2) and hydrofluoric acid (HF). The effect of exposure time and concentration on the microhardness and roughness is studied to understand the surface chemistry after chemical treatment. The hydrogen peroxide forms a passivated layer, and it helps in easy material removal. Hydrofluoric acid improves surface quality and also helps in the removal of contaminants. The finished surface is characterized to understand the effect of chemical treatment on the finishing rate and surface topography. Normal and tangential forces are mainly affected by the hardness and surface condition after the chemical treatment. The best combination of parameters (chemical treatment with 1% HF for 30 min) was obtained and finishing was carried out to obtain a nanofinished surface with its areal surface roughness (Sa) reduced to 10 nm