A Location Privacy Extension for DVB-RCS

In this paper we studied the DVB-RCS (Return Channel through Satellite) standard from a privacy perspective and proposed an approach to incorporate a location privacy enhancing mechanism into the standard. Offering location based privacy in DVB-RCS communication is a challenge as the location of a satellite terminal must be revealed to the network operator of the DVB-RCS network for technical and administrative reasons. We proposed an approach of cloaking the location by intentionally compromising its accuracy whilst maintaining the operability and integrity of the communications system. In addition we implemented a proof of concept technique utilizing the theoretical findings of this work on a real DVB-RCS system, presenting the methodology along with the tools used and the experimental results

Acoustic emission behavior of steel fibre reinforced concrete under bending

The present paper describes the acoustic emission (AE) behavior of concrete under four-point bending. Steel fibres of varying content were used as reinforcement in concrete slabs and their influence on the fracture process and the acoustic activity was investigated. The total acoustic emission (AE) activity was found to be directly proportional to the fibre content. Analysis revealed that particular AE parameters change monotonically with the progress of damage and can be used for the characterization of the failure process

Recommendation of RILEM TC 212-ACD: acousticemission and related NDE techniques for crack detectionand damage evaluation in concrete. Measurement method for acoustic emission signals in concrete

The text presented hereafter is a draft for general consideration

Recommendation of RILEM TC 212-ACD: acousticemission and related NDE techniques for crack detectionand damage evaluation in concrete.Test method for damage qualification of reinforced concrete beams by acousticemission

The text presented hereafter is a draft for general consideration

Rhodosporidium toruloides cultivated in NaCl-enriched glucose-based media: adaptation dynamics and lipid production

In the present report and for the first time in the international literature, the impact of the addition of NaCl upon growth and lipid production on the oleaginous yeast Rhodosporidium toruloides was studied. Moreover, equally for first time, lipid production by R. toruloides was performed under non-aseptic conditions. Therefore, the potentiality of R. toruloides DSM 4444 to produce lipid in media containing several initial concentrations of NaCl with glucose employed as carbon source was studied. Preliminary batch-flask trials with increasing amounts of NaCl revealed the tolerance of the strain against NaCl content up to 6.0% (w/v). However, 4.0% (w/v) of NaCl stimulated lipid accumulation for this strain, by enhancing lipid production up to 71.3% (w/w) per dry cell weight. The same amount of NaCl was employed in pasteurized batch-flask cultures in order to investigate the role of the salt as bacterial inhibiting agent. The combination of NaCl and high glucose concentrations was found to satisfactorily suppress bacterial contamination of R. toruloides cultures under these conditions. Batch-bioreactor trials of the yeast in the same media with high glucose content (up to 150 g/L) resulted in satisfactory substrate assimilation, with almost linear kinetic profile for lipid production, regardless of the initial glucose concentration imposed. Finally, fed-batch bioreactor cultures led to the production of 37.2 g/L of biomass, accompanied by 64.5% (w/w) of lipid yield. Lipid yield per unit of glucose consumed received the very satisfactory value of 0.21 g/g, a value amongst the highest ones in the literature. The yeast lipid produced contained mainly oleic acid and to lesser extent palmitic and stearic acids, thus constituting a perfect starting material for “second generation” biodiese

Acoustic emission behavior of steel fibre reinforced concrete under bending

a b s t r a c t The present paper describes the acoustic emission (AE) behavior of concrete under four-point bending. Steel fibres of varying content were used as reinforcement in concrete slabs and their influence on the fracture process and the acoustic activity was investigated. The total acoustic emission (AE) activity was found to be directly proportional to the fibre content. Analysis revealed that particular AE parameters change monotonically with the progress of damage and can be used for the characterization of the failure process

Modeling growth, lipid accumulation and lipid turnover in submerged batch cultures of Umbelopsis isabellina

The production of lipids by oleaginous yeast and fungi becomes more important because these lipids can be used for biodiesel production. To understand the process of lipid production better, we developed a model for growth, lipid production and lipid turnover in submerged batch fermentation. This model describes three subsequent phases: exponential growth when both a C-source and an N-source are available, carbohydrate and lipid production when the N-source is exhausted and turnover of accumulated lipids when the C-source is exhausted. The model was validated with submerged batch cultures of the fungus Umbelopsis isabellina (formerly known as Mortierella isabellina) with two different initial C/N-ratios. Comparison with chemostat cultures with the same strain showed a significant difference in lipid production: in batch cultures, the initial specific lipid production rate was almost four times higher than in chemostat cultures but it decreased exponentially in time, while the maximum specific lipid production rate in chemostat cultures was independent of residence time. This indicates that different mechanisms for lipid production are active in batch and chemostat cultures. The model could also describe data for submerged batch cultures from literature well

Airborne non-contact and contact broadband ultrasounds for frequency attenuation profile estimation of cementitious materials

[EN] In this paper, the study of frequency-dependent ultrasonic attenuation in strongly heterogeneous cementitious materials is addressed. To accurately determine the attenuation over a wide frequency range, it is necessary to have suitable excitation techniques. We have analysed two kinds of ultrasound techniques: contact ultrasound and airborne non-contact ultrasound. The mathematical formulation for frequency-dependent attenuation has been established and it has been revealed that each technique may achieve similar results but requires specific different calibration processes. In particular, the airborne non-contact technique suffers high attenuation due to energy losses at the air-material interfaces. Thus, its bandwidth is limited to low frequencies but it does not require physical contact between transducer and specimen. In contrast, the classical contact technique can manage higher frequencies but the measurement depends on the pressure between the transducer and the specimen. Cement specimens have been tested with both techniques and frequency attenuation dependence has been estimated. Similar results were achieved at overlapping bandwidth and it has been demonstrated that the airborne non-contact ultrasound technique could be a viable alternative to the classical contact technique.The authors acknowledge the support from University College Cork (Ireland), Universidad Politecnica de Valencia and the Spanish Administration under grant BIA2014-55311-C2-2-P and Salvador Madariaga's Programme (PR2016-00344/PR2017-00658).Gosálbez Castillo, J.; Wright, W.; Jiang, W.; Carrión García, A.; Genovés, V.; Bosch Roig, I. (2018). Airborne non-contact and contact broadband ultrasounds for frequency attenuation profile estimation of cementitious materials. Ultrasonics. 88:148-156. https://doi.org/10.1016/j.ultras.2018.03.011S1481568

Functional characterization of a melon alcohol acyl-transferase gene family involved in the biosynthesis of ester volatiles. Identification of the crucial role of a threonine residue for enzyme activity

Volatile esters, a major class of compounds contributing to the aroma of many fruit, are synthesized by alcohol acyl-transferases (AAT). We demonstrate here that, in Charentais melon (Cucumis melo var. cantalupensis), AAT are encoded by a gene family of at least four members with amino acid identity ranging from 84% (Cm-AAT1/Cm-AAT2) and 58% (Cm-AAT1/Cm-AAT3) to only 22% (Cm-AAT1/Cm-AAT4). All encoded proteins, except Cm-AAT2, were enzymatically active upon expression in yeast and show differential substrate preferences. Cm-AAT1 protein produces a wide range of short and long-chain acyl esters but has strong preference for the formation of E-2-hexenyl acetate and hexyl hexanoate. Cm-AAT3 also accepts a wide range of substrates but with very strong preference for producing benzyl acetate. Cm-AAT4 is almost exclusively devoted to the formation of acetates, with strong preference for cinnamoyl acetate. Site directed mutagenesis demonstrated that the failure of Cm-AAT2 to produce volatile esters is related to the presence of a 268-alanine residue instead of threonine as in all active AAT proteins. Mutating 268-A into 268-T of Cm-AAT2 restored enzyme activity, while mutating 268-T into 268-A abolished activity of Cm-AAT1. Activities of all three proteins measured with the prefered substrates sharply increase during fruit ripening. The expression of all Cm-AAT genes is up-regulated during ripening and inhibited in antisense ACC oxidase melons and in fruit treated with the ethylene antagonist 1-methylcyclopropene (1-MCP), indicating a positive regulation by ethylene. The data presented in this work suggest that the multiplicity of AAT genes accounts for the great diversity of esters formed in melon

Quantitative analysis of left atrial function in asymptomatic patients with b-thalassemia major using real-time three-dimensional echocardiography

<p>Abstract</p> <p>Background</p> <p>There is strong evidence that left atrial (LA) size is a prognostic marker in a variety of heart diseases. Recently, real-time three-dimensional echocardiography (RT3DE) has been reported as a useful tool for studying the phasic changes of the left atrial volumes. The aim of this study was to investigate the performance of the left atrium in beta-thalassemic patients with preserved left ventricular ejection fraction (EF) and no iron overload, using RT3DE.</p> <p>Methods</p> <p>Twenty-eight asymptomatic b-thalassemic patients (32.2 ± 4.3 years old, 17 men) who were on iron chelating therapy, as well as 20 age- and sex-matched healthy controls underwent transthoracic RT3DE. The patient group had normal echocardiographic systolic and diastolic indices, while there was no myocardial iron disposition according to MRI. Apical full volume data sets were obtained and LA volumes were measured at 3 time points of the cardiac cycle: (1) maximum volume (LAmax) at end-systole, just before mitral valve opening; (2) minimum volume (LAmin) at end-diastole, just before mitral valve closure; and (3) volume before atrial active contraction (LApreA) obtained from the last frame before mitral valve reopening or at time of the P wave on the surface electrocardiogram. From the derived values, left atrial active and passive emptying volumes, as well as the respective emptying fractions were calculated.</p> <p>Results</p> <p>Left ventricular EF (59.2 ± 2.5% patients vs. 60.1 ± 2.1% controls), E/A, E/E' were similar between the two groups. Differences in the LAmax, LAmin and LApreA between b-thalassemic patients and controls were non-significant, LAmax:(35.5 ± 13.4 vs 31.8 ± 9.8)cm³, LAmin:(16.0 ± 6.0 vs. 13.5 ±4.2)cm³, and LApreA:(25.4 ± 9.8 vs. 24.3 ± 7.2)cm³. However, left atrial active emptying fraction was reduced in the patient group as compared to the healthy population (34.3 ± 16.4% vs. 43.2 ± 11.4%, p < 0.05).</p> <p>Conclusion</p> <p>RT3DE may be a novel technique for the evaluation of LA function in asymptomatic patients with b-Thalassemia Major. Among three-dimensional volumes and indices, left atrial active emptying fraction may be an early index of LA dysfunction in the specific patient population.</p