Accuracy of complex internal channels produced by laser powder bed fusion process

Additive manufacturing (AM) technology has great potential in manufacturing complex internal channels for several applications such as satellite-communication microwave systems. These systems can have complex shapes and make traditional finishing processes a challenge for additive parts. Therefore, it is desirable that the internal surfaces are as close as possible to the tolerance of the field of application. In this study, a complex component, a unique waveguide device with bending, twisting and filtering functionalities, has been designed and manufactured in AlSi10Mg alloy through laser powder bed fusion (L-PBF) process. Three different prototypes with three different curvature (R of 50 mm, 40 mm and 30 mm), operating in Ku/K band, have been manufactured and tested showing a very good agreement with the desired performances. Using 3D scan data, the internal deviations from the CAD model have been evaluated showing an average deviation of the internal areas of about 0.08 mm, 0.046 mm and 0.023 mm from the CAD model for the R of 50 mm, 40 mm and 30 mm respectively The surface roughness measured in the internal channel is about Ra (arithmetic average roughness) of 8 μm ± 1.3 μm and Rz (average maximum height of the roughness profile) of 62.3 μm ± 0.34 μm

Additive Manufacturing Technology for High Performances Feed Horn

In this work the design and manufacturing through selective laser melting technology of single-band dual circular feed-system operating in Ka-band is reported. In the feed design an AM oriented architecture has been employed. The measured performances confirms the good manufacturing of the system that satisfies very stringent requirements in terms of polarization purity

Experimental research activity on additive manufacturing of microwave passive waveguide components

All metal passive waveguide components are key building-blocks of several RF systems used for telecommunications, navigation, imaging, radio-astronomy, and cosmology. The accurate manufacture of these devices in Additive Manufacturing (AM) technologies can open the way to a high integration level of microwave functionalities with a significant cost and mass reduction. In the paper, after an introduction on the most common AM technologies with particular detail on selective laser melting (SLM) and stereo-lithography apparatus (SLA) processes, the results on the on-going research activity are discussed. Measured performances are reported for AM prototypes of Ku/K/Ka-band rectangular and circular waveguide lines, microwave filters and a smooth wall horn

Mitomycin-ifosfamide-cisplatinum (MIP) vs MIP-interferon vs cisplatinum-carboplatin in metastatic non-small-cell lung cancer: a FONICAP randomised phase II study. Italian Lung Cancer Task Force.

The FONICAP group is screening, with randomised phase II studies, the activity of new chemotherapy programmes for advanced non-small-cell lung cancer (NSCLC) looking for regimens with > 30% activity. In the present study, three regimens were tested: MIP (mitomycin 6 mg m-2, ifosfamide 3 g m-2, cisplatinum 80 mg m-2 on day 1 every 28 days); MIP-IFN (MIP and interferon alpha-2b 3 MU s.c. three times a week); and PC (cisplatinum 60 mg m-2 and carboplatin 400 mg m-2 on day 1 every 28 days). Overall 93 chemotherapy-naive patients were enrolled: 23 received MIP, 27 received MIP-IFN and 43 received PC. Eighty per cent of the patients had stage IV and 20% stage IIIb disease (positive pleural effusion or supraclavicular nodes). Response rates were as follows: MIP = 9% (95% CI 1-28%), MIP-IFN = 7% (95% CI 1-24%) and PC = 14% (95% CI 5-28%). The overall median survival was 183 days. Grade III-IV leucopenia was observed in 36% of patients treated with MIP-IFN vs 10% in the other two arms, and thrombocytopenia grade III-IV was reported in nearly 10% of patients overall. In conclusion, (1) all three regimens investigated have poor activity (< 30%); (2) when tested in multicentre randomised phase II trials, MIP displays lower activity than in phase II trials; (3) PC has similar activity to other platinum-containing regimens; (4) randomised phase II studies are a reliable and quick method of determining the anti-tumour activity of novel chemotherapeutic regimens in NSCLC

Characteristic Mode Analysis of Multi-Octave Asymmetric Dipoles

This paper discusses the impedance and front-to-back ratio performance of asymmetric dipoles. These parameters are very important when the antennas are placed over a conductive ground plane and should operate over multi-octave frequency bands. The operation of these antennas is usually described relying on analogies with more classical structures such as symmetric dipoles and tapered slot antennas. To provide a solid theoretical background to this intuition, this work presents the application of characteristic mode analysis to multi-octave dipole antennas. Firstly, a brief review of the main characteristic mode content is presented. Then, characteristic mode analysis is applied to three antenna concepts to emphasize how their geometry impacts on the relevant figures of merit. This allows to draw some conclusions on the achievable performance by different designs

Electromagnetic Design of Broadband Antenna Feed Systems for the Northern Cross Radio Telescope

This contribution deals with the design and implementation of broadband antenna feed systems for the cylindrical offset parabolic reflector of the Northern Cross radio telescope, in the framework of the Square Kilometer Array Design Study (SKADS-FP6) project. Such feed systems have to maintain a proper radiation pattern as well as a good matching condition in the operative frequency band (120-430 MHz) in order to efficiently feed the main reflector. This task is not trivial since more than octave bandwidths are required. Several feed system designs have been carried out on the basis of different architectures such as log periodic antenna arrays, linear arrays of fat dipoles and branched Vivaldi (tapered slot) radiators inside a wired subreflector. Each configuration provides a different trade-off between electrical performance and manufacturing complexity. The most significant computed and experimental results are discussed. Some of the proposed configurations have already been mounted on the Northern Cross Radio Telescope. The adopted mechanical and electronic solutions such as wiring, canalization, amplifier housing and protection are reported. A preliminary study on the application of Focal Plane Arrays on the E/W Arm is also discussed

A coherent polarimeter array for the Large Scale Polarization Explorer balloon experiment

We discuss the design and expected performance of STRIP (STRatospheric Italian Polarimeter), an array of coherent receivers designed to fly on board the LSPE (Large Scale Polarization Explorer) balloon experiment. The STRIP focal plane array comprises 49 elements in Q band and 7 elements in W-band using cryogenic HEMT low noise amplifiers and high performance waveguide components. In operation, the array will be cooled to 20 K and placed in the focal plane of a $\sim 0.6$ meter telescope providing an angular resolution of $\sim1.5$ degrees. The LSPE experiment aims at large scale, high sensitivity measurements of CMB polarization, with multi-frequency deep measurements to optimize component separation. The STRIP Q-band channel is crucial to accurately measure and remove the synchrotron polarized component, while the W-band channel, together with a bolometric channel at the same frequency, provides a crucial cross-check for systematic effects.Comment: In press on the Proceedings of the SPIE Conference Astronomical Telescopes + instrumentation 2012, Amsterdam, paper 8446-27

The UAV-based test source as an end-to-end verification tool for aperture arrays

A UAV-mounted radio-frequency transmitter is proposed as a known reference field source to perform a set of functional tests on aperture arrays. The experimental results obtained on complete prototypes (end-to-end) and sub-assemblies provide good confidence on both amplitude and timing verification

EU-wide methodology to map and assess ecosystem condition

The EU Biodiversity Strategy for 2030 calls for developing an EU-wide methodology to map, assess and achieve good condition of ecosystems, so they can deliver benefits to society through the provision of ecosystem services. The EU-wide methodology presented in this report addresses this methodological gap. The EU-wide methodology has adopted the System of Environmental Economic Accounting - Ecosystem Accounting (SEEA EA) as reference framework. The SEEA EA is an integrated framework for organizing biophysical information about ecosystems, adopted as a global statistical standard by the United Nations. The SEEA EA is also the reference framework under the proposal for the amendment of Regulation (EU) No 691/2011 on European environmental economic accounts. Building on previous work done within the MAES initiative, the EU-wide methodology presents useful insights to operationalise the SEEA EA at EU level by integrating different EU data streams in a consistent way with this global statistical standard to consistently map and assess ecosystem condition in the EU across all ecosystem types. The adoption of the SEEA EA framework offers the flexibility to integrate different data flows, leveraging the use of available EU data, such as data reported by MS under EU legislation and EU geospatial data. The EU-wide methodology. The implementation of the EU-wide methodology, making use of available data, will provide the scientific knowledge base to support a range of policies and legal instruments

Desmophyllum dianthus (Esper, 1794) in the scleractinian phylogeny and its intraspecific diversity

© The Author(s), 2012. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in PLoS One 7 (2012): e50215, doi:10.1371/journal.pone.0050215.The cosmopolitan solitary deep-water scleractinian coral Desmophyllum dianthus (Esper, 1794) was selected as a representative model species of the polyphyletic Caryophylliidae family to (1) examine phylogenetic relationships with respect to the principal Scleractinia taxa, (2) check population structure, (3) test the widespread connectivity hypothesis and (4) assess the utility of different nuclear and mitochondrial markers currently in use. To carry out these goals, DNA sequence data from nuclear (ITS and 28S) and mitochondrial (16S and COI) markers were analyzed for several coral species and for Mediterranean populations of D. dianthus. Three phylogenetic methodologies (ML, MP and BI), based on data from the four molecular markers, all supported D. dianthus as clearly belonging to the “robust” clade, in which the species Lophelia pertusa and D. dianthus not only grouped together, but also shared haplotypes for some DNA markers. Molecular results also showed shared haplotypes among D. dianthus populations distributed in regions separated by several thousands of kilometers and by clear geographic barriers. These results could reflect limited molecular and morphological taxonomic resolution rather than real widespread connectivity. Additional studies are needed in order to find molecular markers and morphological features able to disentangle the complex phylogenetic relationship in the Order Scleractinia and to differentiate isolated populations, thus avoiding the homoplasy found in some morphological characters that are still considered in the literature.This study was funded by CTM2009-00496 and CGL2011-23306 projects of the “Ministerio de Ciencia e Innovación” (Spain). Research at sea was partly supported by the European Commission F. P.VI Project HERMES Contract No. GOCE-CT-2005-511234-1) and the EU F.P. VII Project HERMIONE(contract number no. 226354)