Performance evaluation of multicell coordinated beamforming approaches for OFDM systems

In this paper we propose and evaluate multicell coordinated beamforming schemes for the downlink of MISO-OFDM systems. The precoders are designed in two phases: first the precoder vectors are computed in a distributed manner at each BS considering two criteria, namely distributed zero-forcing and virtual signal-to-interference noise ratio. Then the system is optimized through distributed power allocation under per-BS power constraint. The proposed power allocation scheme is designed based on minimization of the average bit error rate over all the available subcarriers. Both the precoder vectors and the power allocation are computed by assuming that the BSs have only knowledge of local channel state information and do not share the data symbols. The performance of the proposed schemes are evaluated, considering typical pedestrian scenarios based on LTE specifications. The results have shown that the proposed distributed power allocation scheme outperform the equal power allocation approach

Graphene setting the stage: tracking DNA hybridization with nanoscale resolution

In this study we use nanophotonic effects of graphene to study DNA hybridization: the z−4 nanoscale distance-dependence of the fluorescence lifetime for fluorophores located in the vicinity of graphene is for the first time used to track a DNA hybridization reaction with nanoscale resolution in real time. First, a nanostaircase with ≈2 nm steps from 0 to a total height of 48 nm is used as a nanoruler to confirm the distance dependence law. We find that the axial sensitivity is suited to determine the nanoscale surface roughness of these samples. The proof-of-concept DNA experiments in aqueous medium involve the hybridization of fluorescently labelled DNA beacons attached to CVD grown graphene with complementary (target) DNA added in solution. We track the conformational changes of the beacons statistically by determining the fluorescence lifetimes of the labelling dye and converting them into nanoscale distances from the graphene. In this way, we are able to monitor the vertical displacement of the label during DNA-beacon unfolding with an axial resolution reaching down to 1 nm. The measured distance increase during the DNA hybridization reaction of about 10 nm matches the length of the target DNA strand. Furthermore, the width of the fluorescence lifetime distributions could be used to estimate the molecular tilt angle of the hybridized ds-DNA configuration. The achieved nanoscale sensitivity opens innovation opportunities in material engineering, genetics, biochemistry and medicine.INL received support for this project from the CCDR-N via the project 'Nanotechnology based functional solutions' (Grant No. NORTE-01-0145-FEDER-000019) and from the Portuguese Foundation for Science and Technology (FCT) via the project 'ON4SupremeSens' PTDC/NAN-OPT/29417/2017. Edite Figueiras received a Marie Curie fellowship via the EU-EC COFUND program 'NanoTRAINforGrowth' (Grant No. 600375). U Minho research was partially supported by the FCT in the framework of the Strategic Funding UID/FIS/04650/2013

Spectral-temporal luminescence properties of Colloidal CdSe/ZnS Quantum Dots in relevant polymer matrices for integration in low turn-on voltage AC-driven LEDs

This work employs spectral and spectral-temporal Photoluminescence (PL) spectroscopy techniques to study the radiative mechanisms in colloidal CdSe/ZnS Quantum Dot (QD) thin films without and with 1% PMMA polymer matrix embedding (QDPMMA). The observed bimodal transient-spectral PL distributions reveal bandgap transitions and radiative recombinations after interdot electron transfer. The PMMA polymer embedding protects the QDs during the plasma-sputtering of inorganic layers electroluminescent (EL) devices, with minimal impact on the charge transfer properties. Further, a novel TiO2-based, all-electron bandgap, AC-driven QLED architecture is fabricated, yielding a surprisingly low turn-on voltage, with PL-identical and narrow-band EL emission. The symmetric TiO2 bilayer architecture is a promising test platform for alternative optical active materials.European Commission, Seventh Framework Programme (600375); European Commission, Horizon 2020 Framework Programme (828841); European Regional Development Fund, INTERREG V-A España-Portugal (POCTEP) 2014-2020 (0181_NANOEATERS_1_EP); CCDR-N (NORTE-01-0145-FEDER-000019); Fundação para a Ciência e a Tecnologia (UIDB/04650/2020)

Resposta de plantas jovens de limeira-ácida 'Tahiti' a diferentes níveis de irrigação

The aim of this study was to evaluate the effect of different irrigation levels on canopy and root growth, productivity, and fruit quality of young ‘Tahiti’ acid lime trees. The experiment was installed in Piracicaba, Brazil in a 1.0-ha orchard plot with ‘Tahiti’ acid lime trees, grafted on ‘Swingle’ citrumelo rootstock and carried out from August of 2002 to May 2005. Each treatment was assigned to a drip irrigation level, based on ETc as follows: T1) non-irrigated, T2) 25%, T3) 50%, T4) 75% and T5) 100% of ETc determined by weighing lysimeter presented in the orchard plot. Trunk diameter and tree height were evaluated monthly. The roots were evaluated when the trees were 30 and 48 months old. The yield and fruit quality was evaluated in 2004 and 2005. The results showed that irrigation did not influence root distribution in depth, and trees irrigated with 75% and 100% ETc showed horizontal root distribution concentrated until 0.6 m from the trunk. Irrigation did not improve the quality of fruit. Yield increased in all irrigated treatment, but the most efficient yield mean per unit of water applied was the 25% ETc treatment.O objetivo deste trabalho foi avaliar o efeito de diferentes níveis de irrigação sobre o crescimento da copa e raízes, produtividade e qualidade de frutos de plantas jovens de limeira-ácida ‘Tahiti’. O experimento foi instalado em Piracicaba, em um hectare plantado com limeira-ácida ‘Tahiti’ enxertadas sobre porta-enxerto citromelo ‘Swingle’e irrigadas por gotejamento. O experimento foi conduzido durante o período de agosto de 2002 a maio de 2005. Cada tratamento correspondeu a um nível de irrigação baseado nos valores de evapotranspiração da cultura (ETc): T1) não irrigado; T2) 25%; T3) 50%; T4) 75% e T5) 100% da ETc determinada por meio de um lisímetro de pesagem, presente na área. O diâmetro e a altura das plantas foram avaliados mensalmente. As raízes foram avaliadas quando as plantas estavam com 30 e 48 meses de idade. A produtividade e a qualidade dos frutos foram avaliadas em 2004 e 2005. Os resultados mostraram que a irrigação não influenciou na distribuição do sistema radicular em profundidade, e que plantas irrigadas com lâminas de água equivalentes a 75 e 100% da ETc mostraram uma distribuição horizontal de raízes concentradas a 0,60 m de distância do tronco. Aos 48 meses, a irrigação não influenciou na distribuição do sistema radicular no perfil do solo. A irrigação não melhorou a qualidade dos frutos. A produtividade aumentou em todos os tratamentos irrigados, mas o tratamento correspondente à lâmina de 25% da ETc foi o mais eficiente por unidade de água aplicada

Trnsys simulation results of an existing monitored small scale CHCP system and mathematical model adaptations of the air-cooled ammonia chiller and CHP prototypes

This work is a TRNSYS simulation of solar thermal system working together with an existing small sized CHCP (Combinet Heat Cooling and Power) demonstration project, included in the workpackage 5 (simulation) of the PolySMART project. The first objective of this work is to fine tune simulation parameters of the simulation Units (or Types), based on monitoring data collected during the first semester of 2010. The second objective is to further develop the mathematical models of type 107 (Hot Water-Fired Single-Effect Absorption Chiller) and type 120 (HYDROGEMS: Diesel Engine Generator System (DEGS) - Version 1.1). This will tackle the remaining differences between the real and simulated systems. These differences are due to the fact that both the CHP and the Ammonia-Water Air Cooled Chiller are prototypes. The third objective is to simulate the performance of different thermal collectors, some of which are also prototypes, and choose a proper solution for future experiments. The forth objective is to compare local weather data sets, collected on site since 2007, with proven standard data sets. Further work may be developed regarding the fan coils used to carry in/out heat

Monitoring Results of a Small Scale CHCP System

A small scale trigeneration system for combined heat, cold and power production was developed and installed at the Laboratório Nacional de Energia e Geologia, I.P. campus in Lisbon, Portugal. This system is one of the twelve experimental trigeneration systems being developed and tested across Europe within the PolySMART project. The CHCP system main constituents are a purpose made CHP prototype with an estimated 27kW maximum heat capacity and 9,6kW maximum electrical capacity and a TDC prototype with 8kW cooling power. The hydraulic scheme is presented and briefly analyzed. The data obtained during the monitoring of the system during heat and cold seasons is presented and analyzed for the global system. Main components behavior is analyzed with regard of their real performance when installed on a CHCP system

Estudo de Caso do Uso de Linguagens de Script em Jogos

Este artigo introduz o conceito de linguagens de script,apresentando características das linguagens mais usadas. Também apresenta um exemplo de uma aplicação que integra a linguagem de script Ruby e C++, usando um interpretador Ruby embarcado para uso em jogo

The use of technology and information systems in a quality improvement project developed in a Portuguese Internal Medicine Department: innovative ideas from RITUAL project

info:eu-repo/semantics/publishedVersio

Poultry shelf-life enhancing potential of nanofibers and nanoparticles containing Porphyra dioica extracts

Aqueous extracts of commercially available red macroalgae Porphyra dioica were integrated as inner coatings of food-grade polypropylene (PP) films through use of electrospinning and electrospraying technologies. Two coating formulations (A = 5 wt% P. dioica extract and 7.5 wt% polyvinyl alcohol (PVA); B = 1 wt% P. dioica extract, 1 wt% PVA, and 17% gelatine) were evaluated as to their capacity to delay spoilage of minced chicken breasts, through monitoring of microbial growth (total mesophile aerobic colony counts), colour stability, lipid oxidation (thiobarbituric acid reactive substances (TBARS)), and sensory analysis over a 4-day refrigerated storage. Scanning electron microscopy (SEM) imaging revealed an increased nanofiber and nanoparticle density on extract-enriched fibers, without compromise to their morphology or the homogeneity of the coatings. Total microbial counts on coating B samples was significantly (p < 0.001) reduced compared to uncoated plastic wraps. The coated samples also exhibited fewer colour degradation, though the coatings did not di er substantially from uncoated plastic wrap. Sensory analysis test subjects successfully distinguished the raw samples based on their treatment and gave a positive approval rating (66.7%) to the extract-enriched coatings when asked about edibility post storage.info:eu-repo/semantics/publishedVersio