Factors Towards Voluntary Turnover Among Employees in Malaysia Banking Institution

Voluntary Turnover refers to the decision of an employee to leave their organization based on their own intention and self-control. Thus this condition may give negative affects to one organization in terms of monetary, productivity and time deficit. The paper aimed to explore the relationship between factors namely job satisfaction, career adaptability, turnover intention and pay towards voluntary turnover in the banking sector. Self-administered questionnaire is distributed conveniently among respondents from several departments known as Human Resources, Marketing, Retail Rehabilitation, Branch Operation Processing, Treasury and Investigation Audit. The study uses SPSS (Scientific Package for Social Sciences) to specified frequencies distribution, reliability analysis, correlation coefficient (Pearson’s) and regression analysis. The analysis proved that there is a significant relationship between voluntary turnover and three independent variables (turnover intention, job satisfaction and pay). The result revealed that the turnover intention is the most influence factor toward voluntary turnover.     Keywords: Voluntary Turnover; Job Satisfaction; Career Adaptability; Turnover Intention; Pa

Effect of titanium dioxide (TiO₂) nanoparticle coating on the detection performance of microfiber knot resonator sensors for relative humidity measurement

In this study, the sensitivity and the linearity of the un-coated and TiO2-coated microfiber knot resonator (MKR) have been analyzed. The MKR is very sensitive to humidity changes since its refractive index is strongly humidity dependent. As a result, shifts occur in the resonance wavelength and there are also changes in output power. The un-coated MKR showed a sensitivity of 1.3 pm/%RH, in terms of the resonance wavelength, and a sensitivity of 0.0626 dB/%RH for the transmitted output power. The sensitivity increased greatly after the deposition of a porous TiO2 nanoparticle coating on the MKR. The TiO2-coated MKR showed an improved sensitivity of 2.5 pm/%RH, with respect to the resonance wavelength, and 0.0836 dB/%RH for the transmitted output power. This MKR sensor has the potential for use in a variety of humidity sensing applications

In Vivo evaluation of the novel nanocomposite porous 3D scaffold in a rabbit model: hematology and biochemistry analysis

Issues of safety are very crucial with biomaterials and medical devices. Sixteen male New Zealand White rabbits equally into four groups: Group A, rabbits had part of their radial bone (2 cm, mid shaft) and left empty as a control. Group B, rabbits were implanted with scaffold 5211. Group C, rabbits were implanted with scaffold 5211GTA+Alginate. Group D, rabbits were implanted with 5211PLA. All scaffolds were prepared by freeze-drying method. Blood samples were collected at day 0 and 1st, 2nd, 3rd, 4th and 8th week after implantation. The blood examination included complete hemogram and certain serum biochemical parameters. The results showed that there was no significant difference (P>0.05) among each treatment group in comparison with control group (day 0). However, red blood cells, hemoglobin, packed cell volume, mean corpuscular hemoglobin concentration, monocyte, plasma protein, inorganic phosphate, sodium, chloride and urea were significantly increased (P<0.05) among treatment groups at week 8. An abnormal architecture of viscera was observed in all animals, thus indicating a form of toxicity related to the degrading scaffold materials. The severity of histopathological lesions in viscera was not coated polymers dependent nor development materials. In conclusion, implantation of 5211 scaffold with or without coated framework has a significant impact on histopathological and certain hematological and biochemical parameters

Quality of life satisfaction among converted Kelantan Chinese Muslims

This article investigates the quality of life of the Kelantan Chinese Muslim community before and after conversion to Islam, focusing on their level of satisfaction in term of economic aspect. This research was carried out using the sequential explanatory mixed method design involving 75 respondents selected for quantitative and five respondents for qualitative. The sampling method adopted was convenience and snowball samplings. The research data was collected using questionnaires and semi-structured interviews. The results revealed that respondents were moderately satisfied before conversion and satisfied after conversion. Besides that, there is no significant difference of quality of life before and after conversion to Islam (F = 0.868, p = 0.355) and it was not influenced by the period of conversion to Islam (F = 0.832, p = 0.589). This analysis indicates numerous respondents are still moderately satisfied in their quality of life even though the average data shows they are satisfied after conversion

Surface resistivity and ultrasonic pulse velocity evaluation of reinforced opc concrete and reinforced geopolymer concrete in marine environment

The concrete structures that are built along the seaside often suffer from reduced service life due to inadequate durability against deterioration. This research reports the findings of concrete resistivity and quality using two Non-Destructive Testing (NDT) measures applied to Reinforced Geopolymer and Ordinary Portland Cement (OPC) concrete in the marine environment. In addition, the relationship between Reinforced Geopolymer and Reinforced OPC concrete was statistically discussed in-terms of strength and direction. The testing was carried out using a Proceeq Resipod Wenner 4-probe to measure Surface Resistivity (SR) and Ultrasonic Pulse Velocity (UPV), respectively. The testings were carried out on beam shaped samples of OPC and Geopolymer concrete that were immersed in seawater over a period of 90 days with similar curing condition. It was found from the present investigation that the maximum SR and maximum UPV values acquired for both the Reinforced OPC and Reinforced Geopolymer concrete are 2.73 kΩcm and 2.07 kΩcm, as well as 4.18 km/s and 4.05 km/s, respectively. It is apparent from the study that both concrete is comparable in terms of quality and surface resistivity

Performance Analysis Of Neural Network Model For Automated Visual Inspection With Robotic Arm Controller System

The concept of Automated Visual Inspection (AVI) have emerged as a powerful platform for industrial machine vision where it used to inspect a large number of products rapidly.However,a major problem with this kind of application is the quality produced by the recognition process.In this paper,a system with the capability of identifying and categorizing a product based on image processing has been implemented.The image was processed by using Radial Basis Function (RBF) based on output center and spread values optimization.Robotic arm controller developed for pick and place the product based on their categories.Two performance measures are used to validate the model classification range and the spread values.The results of this project indicate that the model used able to identify the product and classify it according to their shape

Pairing as an instructional strategy to promote soft skills amongst clinical dental students

Training dentists today is challenging as they are expected to provide a wide range of dental care. In the provision of good dental care, soft skills are equally important as clinical skills. Therefore in dental education the development of soft skills are of prime concern. This study sought to identify the development of soft skills when dental students are paired in their clinical training. In this perception study, four open-ended items were used to elicit students’ feedback on the appropriateness of using clinical pairing as an instructional strategy to promote soft skills. The most frequently cited soft skills were teamwork (70%) and communication (25%) skills. However, both negative and positive behaviours were reported. As for critical thinking and problem solving skills, more positive behaviours were reported for abilities such as to explain, analyze, find ideas and alternative solutions, and make decisions. Leadership among peers was not evident as leading without legitimate authority could be a hindrance to its development. If clinical pairing is to be used as an effective instructional strategy to promote soft skills amongst students, clear guidelines need to be developed to prepare students to work in a dental team and the use of appropriate assessment tools can facilitate the development of these soft skills

Role of DNA methylation in head and neck cancer

Head and neck cancer (HNC) is a heterogenous and complex entity including diverse anatomical sites and a variety of tumor types displaying unique characteristics and different etilogies. Both environmental and genetic factors play a role in the development of the disease, but the underlying mechanism is still far from clear. Previous studies suggest that alterations in the genes acting in cellular signal pathways may contribute to head and neck carcinogenesis. In cancer, DNA methylation patterns display specific aberrations even in the early and precancerous stages and may confer susceptibility to further genetic or epigenetic changes. Silencing of the genes by hypermethylation or induction of oncogenes by promoter hypomethylation are frequent mechanisms in different types of cancer and achieve increasing diagnostic and therapeutic importance since the changes are reversible. Therefore, methylation analysis may provide promising clinical applications, including the development of new biomarkers and prediction of the therapeutic response or prognosis. In this review, we aimed to analyze the available information indicating a role for the epigenetic changes in HNC

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Background: Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. // Methods: We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung's disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. // Findings: We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung's disease) from 264 hospitals (89 in high-income countries, 166 in middle-income countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in low-income countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. // Interpretation: Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between low-income, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030