14,974 research outputs found
Turbomachinery technology for high-speed civil flight
NASA Lewis' research and technology efforts applicable to turbomachinery for high-speed flight are discussed. The potential benefits and cycle requirements for advanced variable cycle engines and the supersonic throughflow fan engine for a high-speed civil transport application are presented. The supersonic throughflow fan technology program is discussed. Technology efforts in the basic discipline areas addressing the severe operating conditions associated with high-speed flight turbomachinery are reviewed. Included are examples of work in internal fluid mechanics, high-temperature materials, structural analysis, instrumentation and controls
Final Report: Wall Effects in Cavity Flows
The wall effects in cavity flows past an arbitrary two-dimensional body is investigated for both pure-drag and lifting cases based on an inviscid nonlinear flow theory. The over-all features of various theoretical flow models for inviscid cavity flows under the wall effects are discussed from the general momentum consideration in comparison with typical viscous, incompressible wake flows in a channel. In the case of pure drag cavity flows, three theoretical models in common use, namely, the open-wake, Riabouchinsky and re-entrant jet models, are applied to evaluate the solution. Methods of numerical computation are discussed for bodies of arbitrary shape, and are carried out in detail for wedges of all angles. The final numerical results are compared between the different flow models, and the differences pointed out. Further analysis of the results has led to development of several useful formulas for correcting the wall effect. In the lifting flow case, the wall effect on the pressure and hydrodynamic forces acting on arbitrary body is formulated for the choked cavity flow in a closed water tunnel of arbitrary shape, and computed for the flat plate with a finite cavity in a straight tunnel
The Asian red seaweed Grateloupia turuturu (Rhodophyta) invades the Gulf of Maine
We report the invasion of the Gulf of Maine, in the northwest Atlantic Ocean, by the largest red seaweed in the world, the Asian Grateloupia turuturu. First detected in 1994 in Narragansett Bay, Rhode Island, south of Cape Cod, this alga had expanded its range in the following years only over to Long Island and into Long Island Sound. In July 2007 we found Grateloupia in the Cape Cod Canal and as far north (east) as Boston, Massachusetts, establishing its presence in the Gulf of Maine. Grateloupia can be invasive and may be capable of disrupting low intertidal and shallow subtidal seaweeds. The plant\u27s broad physiological tolerances suggest that it will be able to expand possibly as far north as the Bay of Fundy. We predict its continued spread in North America and around the world, noting that its arrival in the major international port of Boston may now launch G. turuturu on to new global shipping corridors
Naval History by Conspiracy Theory: The British Admiralty before the First World War and the Methodology of Revisionism
Revisionist interpretations of British naval policy in the Fisher era claim that an elaborate smoke screen was created to hide the Royal Navy’s real policies; while documents showing the true goals were systematically destroyed. By asserting this, revisionists are able to dismiss those parts of the documentary record that contradict their theories, while simultaneously excusing the lack of evidence for their theories by claiming it has been destroyed. This article shows that this methodology is misleading and untenable
The evolution of mass loaded supernova remnants: II. Temperature dependent mass injection rates
We investigate the evolution of spherically symmetric supernova remnants in which mass loading takes place due to conductively driven evaporation of embedded clouds. Numerical simulations reveal significant differences between the evolution of conductively mass loaded and the ablatively mass loaded remnants studied in Paper I. A main difference is the way in which conductive mass loading is extinguished at fairly early times, once the interior temperature of the remnant falls below ~ 107 K. Thus, at late times remnants that ablatively mass load are dominated by loaded mass and thermal energy, while those that conductively mass load are dominated by swept-up mass and kinetic energy. Simple approximations to the remnant evolution, complementary to those in Paper I, are given
Consumer Purchasing Behaviors and Attitudes toward Shopping at Public Markets
This paper identifies and empirically evaluates factors that explain the variations in consumers’ attitudes toward shopping at farmers markets in general and public markets in particular. The analysis draws on data from a telephone survey conducted in Jefferson County, Alabama. Logit model results point to several factors that seem to be strongly correlated with consumer purchasing behaviors and attitudes toward shopping at public markets, including income, education, age of household head, household size, and price and quality of produce. The insights gained from the study should help farmers increase the profitability of their operations and improve the likelihood that they will continue farming.Consumer/Household Economics,
Bonding with Self-etching Primers – Pumice or Pre-etch? An \u3cem\u3ein vitro\u3c/em\u3e Study
The purpose of this study was to compare the shear bond strengths (SBSs) of orthodontic brackets bonded with self-etching primer (SEP) using different enamel surface preparations. A two-by-two factorial study design was used. Sixty human premolars were harvested, cleaned, and randomly assigned to four groups (n = 15 per group). Teeth were bathed in saliva for 48 hours to form a pellicle. Treatments were assigned as follows: group 1 was pumiced for 10 seconds and pre-etched for 5 seconds with 37 per cent phosphoric acid before bonding with SEP (Transbond Plus). Group 2 was pumiced for 10 seconds before bonding. Group 3 was pre-etched for 5 seconds before bonding. Group 4 had no mechanical or chemical preparation before bonding. All teeth were stored in distilled water for 24 hours at 37°C before debonding. The SBS values and adhesive remnant index (ARI) score were recorded. The SBS values (±1 SD) for groups 1–4 were 22.9 ± 6.6, 16.1 ± 7.3, 36.2 ± 8.2, and 13.1 ± 10.1 MPa, respectively. Two-way analysis of variance and subsequent contrasts showed statistically significant differences among treatment groups. ARI scores indicated the majority of adhesive remained on the bracket for all four groups. Pre-etching the bonding surface for 5 seconds with 37 per cent phosphoric acid, instead of pumicing, when using SEPs to bond orthodontic brackets, resulted in greater SBSs
Bonding with Self-etching Primers – Pumice or Pre-etch? An \u3cem\u3ein vitro\u3c/em\u3e Study
The purpose of this study was to compare the shear bond strengths (SBSs) of orthodontic brackets bonded with self-etching primer (SEP) using different enamel surface preparations. A two-by-two factorial study design was used. Sixty human premolars were harvested, cleaned, and randomly assigned to four groups (n = 15 per group). Teeth were bathed in saliva for 48 hours to form a pellicle. Treatments were assigned as follows: group 1 was pumiced for 10 seconds and pre-etched for 5 seconds with 37 per cent phosphoric acid before bonding with SEP (Transbond Plus). Group 2 was pumiced for 10 seconds before bonding. Group 3 was pre-etched for 5 seconds before bonding. Group 4 had no mechanical or chemical preparation before bonding. All teeth were stored in distilled water for 24 hours at 37°C before debonding. The SBS values and adhesive remnant index (ARI) score were recorded. The SBS values (±1 SD) for groups 1–4 were 22.9 ± 6.6, 16.1 ± 7.3, 36.2 ± 8.2, and 13.1 ± 10.1 MPa, respectively. Two-way analysis of variance and subsequent contrasts showed statistically significant differences among treatment groups. ARI scores indicated the majority of adhesive remained on the bracket for all four groups. Pre-etching the bonding surface for 5 seconds with 37 per cent phosphoric acid, instead of pumicing, when using SEPs to bond orthodontic brackets, resulted in greater SBSs
- …