Fundamental social motives measured across forty-two cultures in two waves

How does psychology vary across human societies? The fundamental social motives framework adopts an evolutionary approach to capture the broad range of human social goals within a taxonomy of ancestrally recurring threats and opportunities. These motives-self-protection, disease avoidance, affiliation, status, mate acquisition, mate retention, and kin care-are high in fitness relevance and everyday salience, yet understudied cross-culturally. Here, we gathered data on these motives in 42 countries (N = 15,915) in two cross-sectional waves, including 19 countries (N = 10,907) for which data were gathered in both waves. Wave 1 was collected from mid-2016 through late 2019 (32 countries, N = 8,998; 3,302 male, 5,585 female; Mage = 24.43, SD = 7.91). Wave 2 was collected from April through November 2020, during the COVID-19 pandemic (29 countries, N = 6,917; 2,249 male, 4,218 female; Mage = 28.59, SD = 11.31). These data can be used to assess differences and similarities in people's fundamental social motives both across and within cultures, at different time points, and in relation to other commonly studied cultural indicators and outcomes

In vitro analysis of the cytotoxicity and the antimicrobial effect of four endodontic sealers

<p>Abstract</p> <p>Introduction</p> <p>The aim of this study was to investigate <it>in vitro </it>the cytotoxicity and antibacterial properties of four different endodontic sealers using human periodontal ligament fibroblast cell proliferation and visual analysis of growth inhibition.</p> <p>Methods</p> <p>A silicone (GuttaFlow), silicate (EndoSequence BC), zinc oxide eugenol (Pulp Canal Sealer EWT) and epoxy resin (AH Plus Jet) based sealer were incubated with PDL fibroblasts (10⁴cells/ml, n = 6) up to 96 h. Cell proliferation (RFU) was determined by means of the Alamar Blue assay. Cell growth and morphology was visualized by means of fluorescent dyes. Possible antibacterial properties of the different sealers were visualized by means of SEM (<it>Enterococcus faecalis; Parvimonas micra</it>).</p> <p>Results</p> <p>Fibroblast proliferation depended on sealer and cultivation time. After 72 and 96 h GuttaFlow and EndoSequence BC showed relatively non-cytotoxic reactions, while Pulp Canal Sealer EWT and AH Plus Jet caused a significant decrease of cell proliferation (p < 0.001). Visualization of cell growth and morphology with various fluorescent dyes supplemented the results. No antibacterial effect of EndoSequence BC to <it>P. micra </it>was found, whereas GuttaFlow showed a weak, Pulp Canal Sealer EWT and AH Plus Jet extensive growth inhibition. Also, no antibacterial effect of GuttaFlow, EndoSequence BC or AH Plus Jet to <it>E. faecalis </it>could be detected.</p> <p>Conclusions</p> <p>These <it>in vitro </it>findings reveal that GuttaFlow and EndoSequence BC can be considered as biocompatible sealing materials. However, prior to their clinical employment, studies regarding their sealing properties also need to be considered.</p

Fundamental social motives measured across forty-two cultures in two waves

How does psychology vary across human societies? The fundamental social motives framework adopts an evolutionary approach to capture the broad range of human social goals within a taxonomy of ancestrally recurring threats and opportunities. These motives—self-protection, disease avoidance, affiliation, status, mate acquisition, mate retention, and kin care—are high in fitness relevance and everyday salience, yet understudied cross-culturally. Here, we gathered data on these motives in 42 countries (N = 15,915) in two cross-sectional waves, including 19 countries (N = 10,907) for which datawere gathered in both waves. Wave 1 was collected from mid-2016 through late 2019 (32 countries, N = 8,998; 3,302 male, 5,585 female; Mage = 24.43, SD = 7.91). Wave 2 was collected from April through November 2020, during the COVID-19 pandemic (29 countries, N = 6,917; 2,249 male, 4,218 female; Mage = 28.59, SD = 11.31). These data can be used to assess differences and similarities in people’s fundamental social motives both across and within cultures, at different time points, and in relation to other commonly studied cultural indicators and outcomes

Publisher Correction: Fundamental social motives measured across forty-two cultures in two waves.

This is the final version. Available from Nature Research via the DOI in this record.

Fundamental social motives measured across forty-two cultures in two waves.

This is the final version. Available from Nature Research via the DOI in this record. Code availability: All code used to process and visualize the data, including information on software packages used, is freely available in the OSF projectHow does psychology vary across human societies? The fundamental social motives framework adopts an evolutionary approach to capture the broad range of human social goals within a taxonomy of ancestrally recurring threats and opportunities. These motives-self-protection, disease avoidance, affiliation, status, mate acquisition, mate retention, and kin care-are high in fitness relevance and everyday salience, yet understudied cross-culturally. Here, we gathered data on these motives in 42 countries (N = 15,915) in two cross-sectional waves, including 19 countries (N = 10,907) for which data were gathered in both waves. Wave 1 was collected from mid-2016 through late 2019 (32 countries, N = 8,998; 3,302 male, 5,585 female; Mage = 24.43, SD = 7.91). Wave 2 was collected from April through November 2020, during the COVID-19 pandemic (29 countries, N = 6,917; 2,249 male, 4,218 female; Mage = 28.59, SD = 11.31). These data can be used to assess differences and similarities in people's fundamental social motives both across and within cultures, at different time points, and in relation to other commonly studied cultural indicators and outcomes.National Science FoundationFAPESP (São Paulo Research Foundation)Czech Science FoundationCzech Science FoundationInstitute of Psychology, Czech Academy of SciencesUniversidad de la FronteraAberystwyth Universit

Nanofunctionalized zirconia and barium sulfate particles as bone cement additives

Riaz Gillani1, Batur Ercan1, Alex Qiao3, Thomas J Webster1,21Division of Engineering, 2Department of Orthopaedics, Brown University, Providence, RI, USA; 3G3 Technology Innovations, LLC, Pittsford, NY, USAAbstract: Zirconia (ZrO2) and barium sulfate (BaSO4) particles were introduced into a methyl methacrylate monomer (MMA) solution with polymethyl methacrylate (PMMA) beads during polymerization to develop the following novel bone cements: bone cements with unfunctionalized ZrO2 micron particles, bone cements with unfunctionalized ZrO2 nanoparticles, bone cements with ZrO2 nanoparticles functionalized with 3-(trimethoxysilyl)propyl methacrylate (TMS), bone cements with unfunctionalized BaSO4 micron particles, bone cements with unfunctionalized BaSO4 nanoparticles, and bone cements with BaSO4 nanoparticles functionalized with TMS. Results demonstrated that in vitro osteoblast (bone-forming cell) densities were greater on bone cements containing BaSO4 ceramic particles after four hours compared to control unmodified bone cements. Osteoblast densities were also greater on bone cements containing all of the ceramic particles after 24 hours compared to unmodified bone cements, particularly those bone cements containing nanofunctionalized ceramic particles. Bone cements containing ceramic particles demonstrated significantly altered mechanical properties; specifically, under tensile loading, plain bone cements and bone cements containing unfunctionalized ceramic particles exhibited brittle failure modes whereas bone cements containing nanofunctionalized ceramic particles exhibited plastic failure modes. Finally, all bone cements containing ceramic particles possessed greater radio-opacity than unmodified bone cements. In summary, the results of this study demonstrated a positive impact on the properties of traditional bone cements for orthopedic applications with the addition of unfunctionalized and TMS functionalized ceramic nanoparticles.Keywords: orthopedic, nanotechnology, bone cements, osteoblast

Posterior malleolar ankle fractures: Predictors of outcome

Aims The primary aim of this study was to address the hypothesis that fracture morphology might be more important than posterior malleolar fragment size in rotational type posterior malleolar ankle fractures (PMAFs). The secondary aim was to identify clinically important predictors of outcome for each respective PMAF-type, to challenge the current dogma that surgical decision-making should be based on fragment size. Methods This observational prospective cohort study included 70 patients with operatively treated rotational type PMAFs, respectively: 23 Haraguchi Type I (large posterolateral-oblique), 22 Type II (two-part posterolateral and posteromedial), and 25 (avulsion-) Type III. There was no standardized protocol on how to address the PMAFs and CT-imaging was used to classify fracture morphology and quality of postoperative syndesmotic reduction. Quantitative 3D-CT (Q3DCT) was used to assess the quality of fracture reduction, respectively: the proportion of articular involvement; residual intra-articular: gap, step-off, and 3D-displacement; and residual gap and step-off at the fibular notch. These predictors were correlated with the Foot and Ankle Outcome Score (FAOS) at two-years follow-up. Results Bivariate analyses revealed that fracture morphology (p = 0.039) as well as fragment size (p = 0.007) were significantly associated with the FAOS. However, in multivariate analyses, fracture morphology (p = 0.001) (but not fragment size (p = 0.432)) and the residual intra-articular gap(s) (p = 0.009) were significantly associated. Haraguchi Type-II PMAFs had poorer FAOS scores compared with Types I and III. Multivariate analyses identified the following independent predictors: step-off in Type I; none of the Q3DCT-measurements in Type II, and quality of syndesmotic reduction in small-avulsion Type III PMAFs. Conclusion PMAFs are three separate entities based on fracture morphology, with different predictors of outcome for each PMAF type. The current debate on whether or not to fix PMAFs needs to be refined to determine which morphological subtype benefits from fixation. In PMAFs, fracture morphology should guide treatment instead of fragment size