208 research outputs found

    A study of the etapipi channel produced in central pp interactions at 450 GeV/c

    Get PDF
    The reaction pp -> pf (eta pi pi) ps has been studied at 450 GeV/c. There is clear evidence for an a2(1320)pi decay mode of the eta2(1645) and eta2(1870). In addition, there is evidence for an a0(980)pi$ decay mode of both resonances and an f2(1270)eta decay mode of the eta2(1870). No evidence is found for a JPC = 2++ a2(1320)pi wave.Comment: 15 pages, Latex, 4 Figures Branching ratio a2pi /f2 eta correcte

    A study of the f0(1370), f0(1500), f0(2000) and f2(1950) observed in the centrally produced 4pi final states

    Get PDF
    The production and decay properties of the f0(1370), f0(1500), f0(2000) and f2(1950) have been studied in central pp interactions at 450 GeV/c. The dPT, phi and |t| distributions of these resonances are presented. For the J = 0 states, the f0(1370) and f0(2000) have similar dPT and phi dependences. These are different to the dPT and phi dependences of the f0(980), f0(1500) and f0(1710). For the J = 2 states the f2(1950) has different dependences to the f2(1270) and f2'(1520). This shows that the dPT and phi dependences are not just J phenomena.Comment: 14 pages, Latex, 4 Figure

    Extraction of Kaon Formfactors from K^- -> mu^- nu_mu gamma Decay at ISTRA+ Setup

    Get PDF
    The radiative decay K->mu nu gamma has been studied at ISTRA+ setup in a new kinematical region. About 22K events of K^- -> mu^- nu_mu gamma have been observed. The sign and value of Fv-Fa have been measured for the first time. The result is Fv-Fa=0.21(4)(4).Comment: 11 pages, 21 figures, submitted to Phys. Lett.

    The possibility of application of pyrometric method in industrial dosimetry of electron beam radiation

    Get PDF
    Validation of process of medical product sterilization includes absorbed dose mapping in a phantom made of material representative of the object to be processed. Commonly, such measurements are carried out using the disposable chemical dosimeters placed in the phantom at the nodes of the 3D grid. Such a procedure is very laborious and costly in terms of the consumption of dosimeters. In the work, we investigated the possibility of using pyrometric method for prompt mapping of the absorbed dose. The studies were carried out using a rectangular phantom in the form of a set of expanded polystyrene plates, which is exposed to a scanned electron beam. The temperature and absorbed dose distributions in the phantom were measured. A linear dependence between them has been established. The calculation of the absorbed dose profile was also performed by MC simulations. Satisfactory agreement of the calculated dose distribution with the measured one is shown. The limitations of applicability of the proposed method are determined.Валідація процесу стерилізації виробів медичного призначення включає картування просторового розподілу поглинутої дози у фантомі з матеріалу, який є репрезентативний до оброблюваного об’єкту. Зазвичай такі вимірювання проводяться з використанням одноразових хімічних дозиметрів, що розміщені у фантомі у вузлах 3D-сітки. Ця процедура є досить трудомісткою та затратною щодо витрати дозиметричних систем. Вивчена можливість застосування пірометричного методу для оперативного картування поглинутої дози. Дослідження проводилися з використанням прямокутного фантома у вигляді набору пластин з пінополістиролу, на який діє сканований пучок електронів. Проведено спільне вимірювання розподілу температури і поглинутої дози у фантомі. Встановлено лінійну залежність між ними. Розрахунок профілю поглинутої дози виконано також методом MC-моделювання. Показана задовільна відповідність розрахункового розподілу дози з виміряним. Визначено граничні умови застосування запропонованого методу.Валидация процесса стерилизации продукции медицинского назначения включает картографирование пространственного распределения поглощенной дозы в фантоме из материала, репрезентативного к обрабатываемому грузу. Обычно такие измерения проводятся с использованием одноразовых химических дозиметров, размещаемых в фантоме в узлах 3D-сетки. Эта процедура является весьма трудоемкой и затратной по расходу дозиметрических систем. Изучена возможность применения пирометрического метода для оперативного картографирования поглощенной дозы. Исследования проводились с использованием прямоугольного фантома в виде набора пластин из пенополистирола, на который воздействует сканируемый пучок электронов. Проведены совместные измерения распределения температуры и поглощенной дозы в фантоме. Установлена линейная зависимость между ними. Расчет профиля поглощенной дозы выполнен также методом MC-моделирования. Показано удовлетворительное соответствие расчетного распределения дозы с измеренным. Определены граничные условия применимости предложенного метода

    Application of cathodoluminescence for on-line monitoring of regime of an industrial electron accelerator

    Get PDF
    Continuous monitoring of critical parameters of an industrial electron accelerator provides quality of product processing. For that purpose, the methods of contact-free diagnostics of processing regime are developed. One of them is based on application of a wide-aperture stack-monitor for on-line measurement of beam current, electron energy, and also the mean absorbed dose over the plain of beam scanning in an irradiated object [1]. In the work, the conditions of application of cathodoluminescence (CL), accompanied action of accelerated electrons on amorphous dielectrics, for adjustment of the stack-monitor, and also for measuring in on-line mode the dose in a point of control as well as of distribution of the electron flux density on the surface of the object, is studied. It is shown, that titanium dioxide, keeping the radiation-optical yield at an accumulated dose of up to 4 MGy, can be considered as a promising material for manufacturing of CL detector.Безперервний моніторинг критичних параметрів промислового прискорювача електронів забезпечує якість обробки продукції. З цією метою розробляють методи безконтактної діагностики режиму обробки. Одним з таких методів є on-line моніторинг струму пучка, енергії електронів і середнього значення поглинутої дози в оброблюваному об’єкті в площині сканування пучка, що базується на використанні широкоапертурного стек-монітора. Досліджені умови застосування катодолюмінесценції (КЛ), яка супроводжує дію прискореними електронами на аморфні діелектрики, для юстирування стек-монітора, а також вимірювання в on-line режимі величини поглинутої дози в контрольній точці та розподілу щільності потоку електронів на поверхні оброблюваного об'єкту. Показано, що як перспективний матеріал для виготовлення КЛ-детектора може бути використаний діоксид титану, який зберігає величину радіаційно-оптичного виходу при інтегральній поглинутій дозі до 4 МГр.Непрерывный мониторинг критических параметров промышленного ускорителя электронов определяет качество обработки продукции. С этой целью разрабатывают методы бесконтактной диагностики режима обработки. Одним из таких методов является on-line мониторинг тока пучка, энергии электронов и среднего значения поглощенной дозы в плоскости сканирования пучка, основанный на использовании широкоаппертурного стек-монитора. Исследованы условия применения катодолюминесценции (КЛ), сопровождающей воздействие ускоренными электронами на аморфные диэлектрики, для юстировки стек-монитора, а также измерения в on-line режиме величины поглощенной дозы в контрольной точке обрабатываемого объекта и распределения плотности потока электронов на его поверхности. Показано, что в качестве перспективного материала для изготовления КЛ-дозиметра может быть использован диоксид титана, который сохраняет величину радиационно-оптического выхода при интегральной поглощенной дозе до 4 МГр

    A coupled channel analysis of the centrally produced K+K- and pi+pi- final states in pp interactions at 450 GeV/c

    Get PDF
    A coupled channel analysis of the centrally produced K+K- and pi+pi- final states has been performed in pp collisions at an incident beam momentum of 450 GeV/c. The pole positions and branching ratios to pipi and KK of the f0(980), f0(1370), f0(1500) and f0(1710) have been determined. A systematic study of the production properties of all the resonances observed in the pi+pi- and K+K- channels has been performed.Comment: 16 pages, Latex, 5 Figure

    Search for Heavy Neutrino in K->mu nu_h(nu_h-> nu gamma) Decay at ISTRA+ Setup

    Full text link
    Heavy neutrino nu_h with m_h < 300MeV/c^2 can be effectively searched for in kaon decays. We put upper limits on mixing matrix element |U_mu_h}|^2 for radiatively decaying nu_h from K->mu nu_h (nu_h -> nu gamma) decay chain in the following parameter region: 30MeV/c^2 < m_h < 80MeV/c^2; 10^{-11}sec < tau_h < 10^{-9}sec. For the whole region |U_{mu h}|^2 < 5 x 10^{-5} for Majorana type of nu_h and | U_{\mu h}|^2 < 8 x 10^{-5} for the Dirac case.Comment: Published in Phys. Lett.

    Experimental evidence for a vector-like behaviour of Pomeron exchange

    Get PDF
    Evidence is presented that the Pomeron act as a non-conserved vector current. A study has been made of the azimuthal angle phi, which is defined as the angle between the pT vectors of the two outgoing protons, in the reaction pp -> pp(X0) for those resonances (X0) which are compatible with being produced by double Pomeron exchange. These distributions have been compared with a model which describes the Pomeron as a non-conserved vector current and a qualitative agreement is found. In addition, when one of the particles exchanged is known to have spin 0, namely pi-Pomeron exchange, the phi distribution is flat.Comment: 13 pages, Latex, 4 Figure
    corecore