Thermo-mechanical compatibility of CFRP versus steel reinforcement for concrete at high temperature

Optimization of the design of concrete structures has become a driver for the use of nonconventional reinforcing materials. One example of this is the emerging use of non-corrosive, highstrength, and lightweight carbon fibre reinforced polymer (CFRP) prestressing tendons. It is widely known that the bond between FRP reinforcing tendons and concrete deteriorates at elevated temperature due to a combination of factors. Lateral thermal expansion of FRP reinforcing tendons at elevated temperature has been shown to have consequences for the bond performance of these systems. This paper presents the results of an experimental study carried out to assess the occurrence of heat-induced longitudinal splitting cracks in concrete specimens reinforced with CFRP or steel prestressing tendons. A novel testing methodology, namely a Heat-Transfer Rate Inducing System (H-TRIS), is used to subject specimens to thermal loading which replicates that experienced by equivalent specimens in a standard fire resistance test. A comparison between CFRP and steel tendons is made, and the occurrence of longitudinal splitting cracks is evaluated in terms of the time to occurrence and thermal gradient within the concrete. Results are compared against an available analytical model

Influence of interface potential on the effective mass in Ge nanostructures

The role of the interface potential on the effective mass of charge carriers is elucidated in this work. We develop a new theoretical formalism using a spatially dependent effective mass that is related to the magnitude of the interface potential. Using this formalism we studied Ge quantum dots (QDs) formed by plasma enhanced chemical vapour deposition (PECVD) and co-sputtering (sputter). These samples allowed us to isolate important consequences arising from differences in the interface potential. We found that for a higher interface potential, as in the case of PECVD QDs, there is a larger reduction in the effective mass, which increases the confinement energy with respect to the sputter sample. We further understood the action of O interface states by comparing our results with Ge QDs grown by molecular beam epitaxy. It is found that the O states can suppress the influence of the interface potential. From our theoretical formalism we determine the length scale over which the interface potential influences the effective mass

Assessment of the radiological impact of a decommissioning nuclear power plant in Italy

The assessment of the radiological impact of a decommissioning Nuclear Power Plant is presented here through the results of an environmental monitoring survey carried out in the area surrounding the Garigliano Power Plant. The levels of radioactivity in soil, water, air and other environmental matrices are shown, in which {\alpha}, {\beta} and {\gamma} activity and {\gamma} equivalent dose rate are measured. Radioactivity levels of the samples from the Garigliano area are analyzed and then compared to those from a control zone situated more than 100 km away. Moreover, a comparison is made with a previous survey held in 2001. The analyses and comparisons show no significant alteration in the radiological characteristics of the area surroundings the plant, with an overall radioactivity depending mainly from the global fallout and natural sources

Assessment of the radiological impact of a decommissioning nuclear power plant in Italy

The assessment of the radiological impact of a decommissioning Nuclear Power Plant is presented here through the results of an environmental monitoring survey carried out in the area surrounding the Garigliano Power Plant. The levels of radioactivity in soil, water, air and other environmental matrices are shown, in which {\alpha}, {\beta} and {\gamma} activity and {\gamma} equivalent dose rate are measured. Radioactivity levels of the samples from the Garigliano area are analyzed and then compared to those from a control zone situated more than 100 km away. Moreover, a comparison is made with a previous survey held in 2001. The analyses and comparisons show no significant alteration in the radiological characteristics of the area surroundings the plant, with an overall radioactivity depending mainly from the global fallout and natural sources.Comment: 13 pages, 6 figures, 2 table

Fretting Fatigue Performance of Unidirectional, Laminated Carbon Fibre Reinforced Polymer Straps at Elevated Service Temperature

The fretting fatigue performance of laminated, unidirectional (UD), pin-loaded, carbon fibre-reinforced polymer (CFRP) straps that can be used as bridge hanger cables was investigated at a sustained service temperature of 60 °C. The aim of this paper is to elucidate the influence of the slightly elevated service temperature on the tensile fatigue performance of CFRP straps. First, steady state thermal tests at ambient temperature and at 60 °C are presented, in order to establish the behaviour of the straps at these temperatures. These results indicated that the static tensile performance of the straps is not affected by the increase in temperature. Subsequently, nine upper stress levels (USLs) between 650 and 1400 MPa were chosen in order to establish the S–N curve at 60 °C (frequency 10 Hz; R = 0.1) and a comparison with an existing S–N curve at ambient temperature was made. In general, the straps fatigue limit was slightly decreased by temperature, up to 750 MPa USL, while, for the higher USLs, the straps performed slightly better as compared with the S–N curve at ambient temperature

Study of 236U/238U ratio at CIRCE using a 16-strip silicon detector with a TOF system

Accelerator Mass Spectrometry (AMS) is presently the most sensitive technique for the measurement of long-lived actinides, e.g. 236 U and x Pu isotopes. A new actinide AMS system, based on a 3-MV pelletron tandem accelerator, is operated at the Center for Isotopic Research on Cultural and Environmental Heritage (CIRCE) in Caserta, Italy. In this paper we report on the procedure adopted to increase the 236 U abundance sensitivity as low as possible. The energy and position determinations of the 236 U ions, using a 16-strip silicon detector have been obtained. A 236 U/ 238 U isotopic ratio background level of about 2.9×10 −11 was obtained, summing over all the strips, using a Time of Flight-Energy (TOF-E) system with a 16-strip silicon detector (4.9×10 −12 just with one strip)