A role for core planar polarity proteins in cell contact-mediated orientation of planar cell division across the mammalian embryonic skin

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. © The Author(s) 2017. Supplementary information accompanies this paper at doi:10.1038/s41598-017-01971-2.The question of how cell division orientation is determined is fundamentally important for understanding tissue and organ shape in both healthy or disease conditions. Here we provide evidence for cell contact-dependent orientation of planar cell division in the mammalian embryonic skin. We propose a model where the core planar polarity proteins Celsr1 and Frizzled-6 (Fz6) communicate the long axis orientation of interphase basal cells to neighbouring basal mitoses so that they align their horizontal division plane along the same axis. The underlying mechanism requires a direct, cell surface, planar polarised cue, which we posit depends upon variant post-translational forms of Celsr1 protein coupled to Fz6. Our hypothesis has parallels with contact-mediated division orientation in early C. elegans embryos suggesting functional conservation between the adhesion-GPCRs Celsr1 and Latrophilin-1. We propose that linking planar cell division plane with interphase neighbour long axis geometry reinforces axial bias in skin spreading around the mouse embryo body.Peer reviewe

Meson Cloud of the Nucleon in Polarized Semi-Inclusive Deep-Inelastic Scattering

We investigate the possibility of identifying an explicit pionic component of the nucleon through measurements of polarized $\Delta^{++}$ baryon fragments produced in deep-inelastic leptoproduction off polarized protons, which may help to identify the physical mechanism responsible for the breaking of the Gottfried sum rule. The pion-exchange model predicts highly correlated polarizations of the $\Delta^{++}$ and target proton, in marked contrast with the competing diquark fragmentation process. Measurement of asymmetries in polarized $\Lambda$ production may also reveal the presence of a kaon cloud in the nucleon.Comment: 23 pages REVTeX, 7 uuencoded figures, accepted for publication in Zeit. Phys.

Toxic equivalency factors (TEFs) for PCBs, PCDDs, PCDFs for humans and wildlife.

An expert meeting was organized by the World Health Organization (WHO) and held in Stockholm on 15-18 June 1997. The objective of this meeting was to derive consensus toxic equivalency factors (TEFs) for polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and dioxinlike polychlorinated biphenyls (PCBs) for both human, fish, and wildlife risk assessment. Based on existing literature data, TEFs were (re)evaluated and either revised (mammals) or established (fish and birds). A few mammalian WHO-TEFs were revised, including 1,2,3,7,8-pentachlorinated DD, octachlorinated DD, octachlorinated DF, and PCB 77. These mammalian TEFs are also considered applicable for humans and wild mammalian species. Furthermore, it was concluded that there was insufficient in vivo evidence to continue the use of TEFs for some di-ortho PCBs, as suggested earlier by Ahlborg et al. [Chemosphere 28:1049-1067 (1994)]. In addition, TEFs for fish and birds were determined. The WHO working group attempted to harmonize TEFs across different taxa to the extent possible. However, total synchronization of TEFs was not feasible, as there were orders of a magnitude difference in TEFs between taxa for some compounds. In this respect, the absent or very low response of fish to mono-ortho PCBs is most noticeable compared to mammals and birds. Uncertainties that could compromise the TEF concept were also reviewed, including nonadditive interactions, differences in shape of the dose-response curve, and species responsiveness. In spite of these uncertainties, it was concluded that the TEF concept is still the most plausible and feasible approach for risk assessment of halogenated aromatic hydrocarbons with dioxinlike properties

A study of backward going pp and π−\pi^{-} in νμCC\nu_{\mu}CC interactions with the NOMAD detector

Backward proton and $\pi^-$ production has been studied in $\nu_{\mu}CC$ interactions with carbon nuclei. Detailed analyses of the momentum distributions, of the production rates, and of the general features of events with a backward going particle, have been carried out in order to understand the mechanism producing these particles. The backward proton data have been compared with the predictions of the reinteraction and the short range correlation models.Comment: 29 pages, 14 figures, submitted to Nucl. Phys.

Colloquium: Mechanical formalisms for tissue dynamics

The understanding of morphogenesis in living organisms has been renewed by tremendous progressin experimental techniques that provide access to cell-scale, quantitative information both on theshapes of cells within tissues and on the genes being expressed. This information suggests that ourunderstanding of the respective contributions of gene expression and mechanics, and of their crucialentanglement, will soon leap forward. Biomechanics increasingly benefits from models, which assistthe design and interpretation of experiments, point out the main ingredients and assumptions, andultimately lead to predictions. The newly accessible local information thus calls for a reflectionon how to select suitable classes of mechanical models. We review both mechanical ingredientssuggested by the current knowledge of tissue behaviour, and modelling methods that can helpgenerate a rheological diagram or a constitutive equation. We distinguish cell scale ("intra-cell")and tissue scale ("inter-cell") contributions. We recall the mathematical framework developpedfor continuum materials and explain how to transform a constitutive equation into a set of partialdifferential equations amenable to numerical resolution. We show that when plastic behaviour isrelevant, the dissipation function formalism appears appropriate to generate constitutive equations;its variational nature facilitates numerical implementation, and we discuss adaptations needed in thecase of large deformations. The present article gathers theoretical methods that can readily enhancethe significance of the data to be extracted from recent or future high throughput biomechanicalexperiments.Comment: 33 pages, 20 figures. This version (26 Sept. 2015) contains a few corrections to the published version, all in Appendix D.2 devoted to large deformation

Studying the spatial variability of methane flux with five eddy covariance towers of varying height

In this study, the spatial representativeness of eddy covariance (EC) methane (CH4) measurements was examined by comparing parallel CH4 fluxes from three short (6 m) towers separated by a few kilometres and from two higher levels (20 m and 60 m) at one location. The measurement campaign was held on an intensively managed grassland on peat soil in the Netherlands. The land use and land cover types are to a large degree homogeneous in the area. The CH4 fluxes exhibited significant variability between the sites on 30-min scale. The spatial coefficient of variation (CVspa) between the three short towers was 56% and it was of similar magnitude as the temporal variability, unlike for the other fluxes (friction velocity, sensible heat flux) for which the temporal variability was considerably larger than the spatial variability. The CVspa decreased with temporal averaging, although less than what could be expected for a purely random process View the MathML source(1/N), and it was 14% for 26-day means of CH4 flux. This reflects the underlying heterogeneity of CH4 flux in the studied landscape at spatial scales ranging from 1 ha (flux footprint) to 10 km2 (area bounded by the short towers). This heterogeneity should be taken into account when interpreting and comparing EC measurements. On an annual scale, the flux spatial variability contributed up to 50% of the uncertainty in CH4 emissions. It was further tested whether EC flux measurements at higher levels could be used to acquire a more accurate estimate of the spatially integrated CH4 emissions. Contrarily to what was expected, flux intensity was found to both increase and decrease depending on measurement height. Using footprint modelling, 56% of the variation between 6 m and 60 m CH4 fluxes was attributed to emissions from local anthropogenic hotspots (farms). Furthermore, morning hours proved to be demanding for the tall tower EC where fluxes at 60 m were up to four-fold those at lower heights. These differences were connected with the onset of convective mixing during the morning period

Evaluating the performance of commonly used gas analysers for methane eddy covariance flux measurements: the InGOS inter-comparison field experiment

The performance of eight fast-response methane (CH4) gas analysers suitable for eddy covariance flux measurements were tested at a grassland site near the Cabauw tall tower (Netherlands) during June 2012. The instruments were positioned close to each other in order to minimise the effect of varying turbulent conditions. The moderate CH4 fluxes observed at the location, of the order of 25 nmol m-2 s-1, provided a suitable signal for testing the instruments' performance. Generally, all analysers tested were able to quantify the concentration fluctuations at the frequency range relevant for turbulent exchange and were able to deliver high-quality data. The tested cavity ringdown spectrometer (CRDS) instruments from Picarro, models G2311-f and G1301-f, were superior to other CH4 analysers with respect to instrumental noise. As an open-path instrument susceptible to the effects of rain, the LI-COR LI-7700 achieved lower data coverage and also required larger density corrections; however, the system is especially useful for remote sites that are restricted in power availability. In this study the open-path LI-7700 results were compromised due to a data acquisition problem in our data-logging setup. Some of the older closed-path analysers tested do not measure H2O concentrations alongside CH4 (i.e. FMA1 and DLT-100 by Los Gatos Research) and this complicates data processing since the required corrections for dilution and spectroscopic interactions have to be based on external information. To overcome this issue, we used H2O mole fractions measured by other gas analysers, adjusted them with different methods and then applied them to correct the CH4 fluxes. Following this procedure we estimated a bias of the order of 0.1 g (CH4) m-2 (8% of the measured mean flux) in the processed and corrected CH4 fluxes on a monthly scale due to missing H2O concentration measurements. Finally, cumulative CH4 fluxes over 14 days from three closed-path gas analysers, G2311-f (Picarro Inc.), FGGA (Los Gatos Research) and FMA2 (Los Gatos Research), which were measuring H2O concentrations in addition to CH4, agreed within 3% (355–367 mg (CH4) m-2) and were not clearly different from each other, whereas the other instruments derived total fluxes which showed small but distinct differences (±10%, 330–399 mg (CH4) m-2)

Een nieuwe en handzame lysimeter: eerste stap naar een nationaal netwerk voor de werkelijke verdamping?

Vrijwel overal op aarde verdampt meer dan de helft van het neerslagwater, ook in Nederland. Toch wordt deze grote verliespost in ons land slechts sporadisch gemeten. Door inspanningen van kennisinstituten, bedrijven en overheid is daarom een lysimeter ontwikkeld. Metingen in 2014 en 2015 op twee locaties vertonen opvallende verschillen, maar ook grote overeenkomsten, met eddy-correlatiemetingen. Schattingen van de verdamping via satellietdata zijn hoger dan de metingen. Tijd daarom, om metingen in het veld te combineren met modellen en waarnemingen vanuit de ruimt

Comparative study of non-invasive force and stress inference methods in tissue

In the course of animal development, the shape of tissue emerges in part from mechanical and biochemical interactions between cells. Measuring stress in tissue is essential for studying morphogenesis and its physical constraints. Experimental measurements of stress reported thus far have been invasive, indirect, or local. One theoretical approach is force inference from cell shapes and connectivity, which is non-invasive, can provide a space-time map of stress and relies on prefactors. Here, to validate force- inference methods, we performed a comparative study of them. Three force-inference methods, which differ in their approach of treating indefiniteness in an inverse problem between cell shapes and forces, were tested by using two artificial and two experimental data sets. Our results using different datasets consistently indicate that our Bayesian force inference, by which cell-junction tensions and cell pressures are simultaneously estimated, performs best in terms of accuracy and robustness. Moreover, by measuring the stress anisotropy and relaxation, we cross-validated the force inference and the global annular ablation of tissue, each of which relies on different prefactors. A practical choice of force-inference methods in distinct systems of interest is discussed.Comment: 12 pages, 8 figures, EPJ E: Topical issue on "Physical constraints on morphogenesis and evolution