Analysing the mechanical performance and growth adaptation of Norway spruce using a non-linear finite-element model and experimental data

Thirteen Norway spruce [Picea abies (L.) Karst.] trees of different size, age, and social status, and grown under varying conditions, were investigated to see how they react to complex natural static loading under summer and winter conditions, and how they have adapted their growth to such combinations of load and tree state. For this purpose a non-linear finite-element model and an extensive experimental data set were used, as well as a new formulation describing the degree to which the exploitation of the bending stress capacity is uniform. The three main findings were: material and geometric non-linearities play important roles when analysing tree deflections and critical loads; the strengths of the stem and the anchorage mutually adapt to the local wind acting on the tree crown in the forest canopy; and the radial stem growth follows a mechanically high-performance path because it adapts to prevailing as well as acute seasonal combinations of the tree state (e.g. frozen or unfrozen stem and anchorage) and load (e.g. wind and vertical and lateral snow pressure). Young trees appeared to adapt to such combinations in a more differentiated way than older trees. In conclusion, the mechanical performance of the Norway spruce studied was mostly very high, indicating that their overall growth had been clearly influenced by the external site- and tree-specific mechanical stres

Investigation of the anticorrosion performance of lignin coatings after crosslinking with triethyl phosphate and their adhesion to a polyurethane topcoat

This study investigates the anticorrosion properties of sustainable organic coatings, which were prepared by dissolution of two different types of technical lignins - organosolv lignin (OL) and kraft lignin (KL) - in an organic solvent and applied onto iron-phosphated steel by airassisted spray coating. Influence of triethyl phosphate (TEP) as a crosslinking agent for lignin and its effect on the anticorrosion properties of coatings during 24 h of immersion in 3.5% NaCl were investigated. Results obtained from electrochemical impedance spectroscopy (EIS) of coated steels suggest that the initial protection performance (1 h immersion) of non-crosslinked OL is higher than that of KL. Nevertheless, KL coatings that contained TEP and were heat-treated at elevated temperature (180 °C) demonstrated the best overall anticorrosion performance. In contrast, a similar trend was not observed for OL coatings, which indicates that the structural properties of lignin may be a crucial factor in applicability of TEP as a crosslinking agent. In addition, a layer of polyurethane was applied on all the different types of lignin coatings prepared and their adhesion characteristics were studied by crosscut adhesion measurements (ISO 2409). These adhesion results revealed that neither KL-TEP nor OL-TEP coatings demonstrate proper adhesive characteristics with a polyurethane (PU) topcoat and consequently these coatings are not suitable for utilization as a primer coating for the PU topcoat studied

A new low mass for the Hercules dSph: the end of a common mass scale for the dwarfs?

We present a new mass estimate for the Hercules dwarf spheroidal galaxy (dSph), based on the revised velocity dispersion obtained by Aden et al. (2009, arXiv:0908.3489). The removal of a significant foreground contamination using newly acquired Stromgren photometry has resulted in a reduced velocity dispersion. Using this new velocity dispersion of 3.72 +/- 0.91 km/s, we find a mass of M_300=1.9^{+1.1}_{-0.8} 10^6 M_sun within the central 300 pc, which is also the half-light radius, and a mass of M_433=3.7_{-1.6}^{+2.2} 10^6 M_sun within the reach of our data to 433 pc, significantly lower than previous estimates. We derive an overall mass-to-light ratio of M_433/L=103^{+83}_{-48} M_sun/L_sun. Our mass estimate calls into question recent claims of a common mass scale for dSph galaxies. Additionally, we find tentative evidence for a velocity gradient in our kinematic data of 16 +/- 3 km/s/kpc, and evidence of an asymmetric extension in the light distribution at about 0.5 kpc. We explore the possibility that these features are due to tidal interactions with the Milky Way. We show that there is a self-consistent model in which Hercules has an assumed tidal radius of r_t = 485 pc, an orbital pericentre of r_p = 18.5 +/- 5 kpc, and a mass within r_t of M_{tid,r_t}=5.2 +/- 2.7 10^6 M_sun. Proper motions are required to test this model. Although we cannot exclude models in which Hercules contains no dark matter, we argue that Hercules is more likely to be a dark matter dominated system which is currently experiencing some tidal disturbance of its outer parts.Comment: 10 pages, 3 figures, Accepted for publication by ApJ

ВЛИЯНИЕ РАСХОДА СЖАТОГО ВОЗДУХА НА УРОВНИ ПОТЕРЬ ЭНЕРГИИ В РАЗЛИЧНыХ ЭЛЕМЕНТАХ ЭЛЕКТРОТЕХНИЧЕСКОГО КОМПЛЕКСА

Розглянуто питання впливу витрати стислого повітря на рівні втрат енергії в різних елементах елект- ротехнічного комплексу. Рассмотрен вопрос влияния расхода сжатого воздуха на уровни потерь энергии в различных элементах электротехнического комплекса

Ultimate pH values in reindeer meat with particular regard to animal sex and age, muscle and transport distance

The distribution of ultimate pH values and the frequency of high pH values in three reindeer muscles (AL longissimus, M. biceps femoris and M. triceps brachii) from bulls, cows and calves after short and long distance transport were studied. About 3400 reindeer carcasses from 12 different herds were included in this study. The post mortem processes in reindeer meat seemed to develop very rapidly, and therefore an early measurement (approx. 15h post mortem) of ultimate pH can be done without electrical stimulation of the carcasses. In a comparison between muscles, M. triceps brachii had a higher ultimate pH value than M. longissimus and M. biceps femoris. Meat from reindeer calves had higher ultimate pH values than meat from adult animals, indicating that calves are more susceptible to stress than adult animals and hence deplete their energy stores more readily. Road transport by lorry did not cause any increase in ultimate pH values in bulls and calves. Reindeer cows, however, did have an increase in ultimate pH, while more borderline cases of DFD (5.80<pH<6.20) were observed when cows were transported over more than 500 km. The physical condition and energy balance of the animals before transport were suggested to determine their ability to tolerate transport stress

Privacy Mining from IoT-based Smart Homes

Recently, a wide range of smart devices are deployed in a variety of environments to improve the quality of human life. One of the important IoT-based applications is smart homes for healthcare, especially for elders. IoT-based smart homes enable elders' health to be properly monitored and taken care of. However, elders' privacy might be disclosed from smart homes due to non-fully protected network communication or other reasons. To demonstrate how serious this issue is, we introduce in this paper a Privacy Mining Approach (PMA) to mine privacy from smart homes by conducting a series of deductions and analyses on sensor datasets generated by smart homes. The experimental results demonstrate that PMA is able to deduce a global sensor topology for a smart home and disclose elders' privacy in terms of their house layouts.Comment: This paper, which has 11 pages and 7 figures, has been accepted BWCCA 2018 on 13th August 201

Root-soil rotation stiffness of Norway spruce ( Picea abies (L.) Karst) growing on subalpine forested slopes

Trees bend and break when exposed to external forces such as wind, rockfall, and avalanches. A common simplification when modelling the tree response to these forces is to simplify the system as a clamped beam which means that the stem deflection is related to the stem flexibility only. However, a certain part of the stem deflection originates from rotation of the root-soil plate. In this paper, we investigate this contribution to the overall stem deflection. Norway spruce (Picea abies (L.) Karst) trees were subjected to winching tests to analyse the anchorage mechanics of the tree. The tests were performed at two experimental sites with an average slope of 32 and 34° and one site with a nearly flat ground in subalpine forests near Davos, Switzerland, during the vegetation periods of 2003 and 2004. The trees were pulled downslope with a winch and the applied force, stem base rotation, and the angle of the applied force relative to the stem were recorded. After the tree had fallen over, stem diameter and branch mass were measured for every meter segment. These data were used to model the tree in the finite element software ANSYS®, which was used for calculating the rotational stem base moment as a␣function of stem base rotation. The root-soil rotation stiffness k root was defined as the secant stiffness calculated at 0.5° root-soil plate rotation. Young's modulus of elasticity E of the stem was iteratively changed until the correct stem rotation was obtained. The best correlation between k root and different tree characteristics was the squared diameter at breast height, DBH2. Not incorporating the normal forces due to weight of the overhanging masses from crown and stem resulted in a maximum underestimation for k root of approximately 14%. Thus, also the acting moment on the stem base will be underestimated causing the safety factor against uprooting to be overestimate

Influence of slaughter age and carcass suspension on meat quality in Angus heifers

This study investigated the effects of pelvic suspension and slaughter age on longissimus thoracis et lumborum (LTL) from 40 heifers with at least 75% Angus breeding. A total of 20 heifers were slaughtered directly from pasture at 18 months of age, and carcass sides were hung either by the Achilles tendon or the pelvic bone. The other 20 heifers were assigned to an additional winter housing period and slaughtered at 22 months of age; carcass sides were hung only by Achilles suspension. All carcasses were electrically stimulated and assessed according to the EUROP carcass classification system. In addition, the LTL muscles were aged for 7 or 14 days before meat quality was evaluated for intramuscular fat (IMF), drip loss, colour, shear force, compression and sensory analysis. The 22-month-old heifers were heavier, fatter and had more IMF than 18-month-old heifers. Conformation scores (muscling) did not differ between the two slaughter groups. Pelvic suspension reduced both between- and within-animal variation for peak force, total energy and compression peak force. For the 18-month-old heifers, pelvic suspension also decreased peak force, total energy and compression variables for the LTL muscles from both ageing periods, whereas Achilles-suspended samples had lower shear force values only at day 14. Sensory analysis showed that pelvic-suspended sides had greater tenderness, lower bite resistance, less threadiness, higher juiciness and meat flavour and less visible marbling than meat from Achilles-suspended sides. Pelvic-suspended sides at 18 months of age were similar in peak force and total energy values to the 22-month-old heifers. The importance of ageing the Achilles-suspended sides was more obvious for samples from 18-month-old heifers than from the 22-month-old animals. The correlations between the different instrumental measurements and sensory tenderness were considerably higher for carcasses suspended by the Achilles tendon (r = -520.55 to 0.20) than for those hung by the pelvic bone (r = -520.25 to 0.19). More correlations between sensory-evaluated tenderness and shear variables were significant after 7 days (n = 6) of ageing than after 14 days (n = 4) of ageing. This study clearly shows the benefits of pelvic suspension, which reduces the need for additional feeding after pasture

Local Destabilization of the Metal-Binding Region in Human Copper−Zinc Superoxide Dismutase by Remote Mutations Is a Possible Determinant for Progression of ALS

More than 100 distinct mutations in the gene CuZnSOD encoding human copper–zinc superoxide dismutase (CuZnSOD) have been associated with familial amyotrophic lateral sclerosis (fALS), a fatal neuronal disease. Many studies of different mutant proteins have found effects on protein stability, catalytic activity, and metal binding, but without a common pattern. Notably, these studies were often performed under conditions far from physiological. Here, we have used experimental conditions of pH 7 and 37 °C and at an ionic strength of 0.2 M to mimic physiological conditions as close as possible in a sample of pure protein. Thus, by using NMR spectroscopy, we have analyzed amide hydrogen exchange of the fALS-associated I113T CuZnSOD variant in its fully metalated state, both at 25 and 37 °C, where ^(15)N relaxation data, as expected, reveals that CuZnSOD I113T exists as a dimer under these conditions. The local dynamics at 82% of all residues have been analyzed in detail. When compared to the wild-type protein, it was found that I113T CuZnSOD is particularly destabilized locally at the ion binding sites of loop 4, the zinc binding loop, which results in frequent exposure of the aggregation prone outer β-strands I and VI of the β-barrel, possibly enabling fibril or aggregate formation. A similar study (Museth, A. K., et al. (2009) Biochemistry, 48, 8817–8829) of amide hydrogen exchange at pH 7 and 25 °C on the G93A variant also revealed a selective destabilization of the zinc binding loop. Thus, a possible scenario in ALS is that elevated local dynamics at the metal binding region can result in toxic species from formation of new interactions at local β-strands

Individual tree biomass equations or biomass expansion factors for assessment of carbon stock changes in living biomass - A comparative study

AbstractSignatory countries to the United Nations Framework Convention on Climate Change (UNFCCC) and its supplementary Kyoto Protocol (KP) are obliged to report greenhouse gas emissions and removals. Changes in the carbon stock of living biomass should be reported using either the default or stock change methods of the Intergovernmental Panel on Climate Change (IPCC) under the Land Use, Land-Use Change and Forestry sector. Traditionally, volume estimates are used as a forestry measures. Changes in living biomass may be assessed by first estimating the change in the volume of stem wood and then converting this volume to whole tree biomass using biomass expansion factors (BEFs). However, this conversion is often non-trivial because the proportion of stem wood increases with tree size at the expense of branches, foliage, stump and roots. Therefore, BEFs typically vary over time and their use may result in biased estimates. The objective of this study was to evaluate differences between biomass estimates obtained using biomass equations and BEFs with particular focus on uncertainty analysis. Assuming that the development of tree fractions in different ways can be handled by individual biomass equations, BEFs for standing stock were shown to overestimate the biomass sink capacity (Sweden). Although estimates for BEFs derived for changes in stock were found to be unbiased, the estimated BEFs varied substantially over time (0.85–1.22ton CO2/m3). However, to some extent this variation may be due to random sampling errors rather than actual changes. The highest accuracy was obtained for estimates based on biomass equations for different tree fractions, applied to data from the Swedish National Forest Inventory using a permanent sample design (estimated change in stock 1990–2005: 420million tons CO2, with a standard error amounting to 26.7million tons CO2) Many countries have adopted such a design combined with the stock change method for reporting carbon stock changes under the UNFCCC/KP