Electric field control of spin lifetimes in Nb-SrTiO3_3 by spin-orbit fields

We show electric field control of the spin accumulation at the interface of the oxide semiconductor Nb-SrTiO$_{3}$ with Co/AlO$_{x}$ spin injection contacts at room temperature. The in-plane spin lifetime $\tau_\parallel$ as well as the ratio of the out-of-plane to in-plane spin lifetime $\tau_\perp/\tau_\parallel$ is manipulated by the built-in electric field at the semiconductor surface, without any additional gate contact. The origin of this manipulation is attributed to Rashba Spin-Orbit Fields (SOFs) at the Nb-SrTiO$_3$ surface and shown to be consistent with theoretical model calculations based on SOF spin flip scattering. Additionally, the junction can be set in a high or low resistance state, leading to a non-volatile control of $\tau_\perp/\tau_\parallel$, consistent with the manipulation of the Rashba SOF strength. Such room temperature electric field control over the spin state is essential for developing energy-efficient spintronic devices and shows promise for complex oxide based (spin)electronicsComment: 5 pages, 4 figure

Expanding the set of rhodococcal Baeyer–Villiger monooxygenases by high-throughput cloning, expression and substrate screening

To expand the available set of Baeyer–Villiger monooxygenases (BVMOs), we have created expression constructs for producing 22 Type I BVMOs that are present in the genome of Rhodococcus jostii RHA1. Each BVMO has been probed with a large panel of potential substrates. Except for testing their substrate acceptance, also the enantioselectivity of some selected BVMOs was studied. The results provide insight into the biocatalytic potential of this collection of BVMOs and expand the biocatalytic repertoire known for BVMOs. This study also sheds light on the catalytic capacity of this large set of BVMOs that is present in this specific actinomycete. Furthermore, a comparative sequence analysis revealed a new BVMO-typifying sequence motif. This motif represents a useful tool for effective future genome mining efforts.

Electric field effects on spin accumulation in Nb-doped SrTiO3 using tunable spin injection contacts at room temperature

We report on features in charge transport and spin injection in an oxide semiconductor, Nb-doped SrTiO3. This is demonstrated using electrically tunable spin injection contacts which exploit the large electric field at the interface and its interplay with the relative permittivity of the semiconductor. We realize spin accumulation in Nb-doped SrTiO3 which displays a unique dependence of the spin lifetime with bias polarity. These findings suggest a strong influence of the interface electric field on the charge transport as well as on spin accumulation unlike in conventional semiconductors and opens up promising avenues in oxide spintronics

Topology of six degrees of freedom magnetic bearing

A novel magnetic topology has been designed for a six degrees of freedom, magnetically levitated and driven mirror, to be used in a three dimensional (3D) measurement system based on laser interferometry. The translations of the mirror are to be kept small, whereas the rotations are to be controlled over a large range with a high bandwidth and high accuracy. Finite element modelling (FEM) is used to analyze the proposed topology. For computational load reduction, a 2D FEM model has been derived from the actual 3D topology, which incorporates most of the magnetic subsystems. Simulations show that cross-influence between the actuators is small, that the forces and torques are proportional to the applied currents and that the angle of the rotor is of little influence. This allows the multiple in multiple out system to be regarded as multiple linear single in single out systems. ©2000 American Institute of Physics

embCAB Sequence Variation Among Ethambutol-Resistant Mycobacterium Tuberculosis Isolates Without embB306 Mutation

Mechanisms of resistance to ethambutol in Mycobacterium tuberculosis remain inadequately described. Although there is mounting evidence that mutations of codon 306 in embB play a key role, a significant number of phenotypically ethambutol-resistant strains do not carry mutations in this codon. Here, other mutations in the embCAB operon are suggested to be involved in resistance development

Quality Assessment of Mycobacterium tuberculosis Genotyping in a Large Laboratory Network

Quality assessment exercises were conducted to evaluate the reproducibility of IS6110 DNA fingerprinting performed by eight laboratories in the National Tuberculosis Genotyping and Surveillance Network. Three panels, each with 8 to 16 isolates, were typed at all laboratories, resulting in 280 images. When the pattern obtained by the majority for each isolate was used as the standard, exact matches were obtained for 73% of patterns; 90% and 97% of patterns matched within one- and two-band differences, respectively. A second approach involved retyping of randomly selected isolates at the Centers for Disease Control and Prevention. Retyping was done for 8–19 isolates per laboratory (76 total). Paired images matched exactly for 54% of isolates and within one and two band differences, 78% and 93%, respectively. We evaluated reasons for mismatching. We also evaluated the reproducibility of spoligotyping using a test panel of 13 isolates; a discrepancy of 1 in 91 results was noted

National Tuberculosis Genotyping and Surveillance Network: Design and Methods

The National Tuberculosis Genotyping and Surveillance Network was established in 1996 to perform a 5-year, prospective study of the usefulness of genotyping Mycobacterium tuberculosis isolates to tuberculosis control programs. Seven sentinel sites identified all new cases of tuberculosis, collected information on patients and contacts, and obtained patient isolates. Seven genotyping laboratories performed DNA fingerprinting analysis by the international standard IS6110 method. BioImage Whole Band Analyzer software was used to analyze patterns, and distinct patterns were assigned unique designations. Isolates with six or fewer bands on IS6110 patterns were also spoligotyped. Patient data and genotyping designations were entered in a relational database and merged with selected variables from the national surveillance database. In two related databases, we compiled the results of routine contact investigations and the results of investigations of the relationships of patients who had isolates with matching genotypes. We describe the methods used in the study

The infectiousness of tuberculosis patients coinfected with HIV

The current understanding of airborne tuberculosis (TB) transmission is based on classic 1950s studies in which guinea pigs were exposed to air from a tuberculosis ward. Recently we recreated this model in Lima, Peru, and in this paper we report the use of molecular fingerprinting to investigate patient infectiousness in the current era of HIV infection and multidrug-resistant (MDR) TB

Characterization of the major formamidopyrimidine–DNA glycosylase homolog in Mycobacterium tuberculosis and its linkage to variable tandem repeats

The ability to repair DNA damage is likely to play an important role in the survival of facultative intracellular parasites because they are exposed to high levels of reactive oxygen species and nitrogen intermediates inside phagocytes. Correcting oxidative damage in purines and pyrimidines is the primary function of the enzymes formamidopyrimidine (faPy)–DNA glycosylase (Fpg) and endonuclease VIII (Nei) of the base excision repair pathway, respectively. Four gene homologs, belonging to the fpg/nei family, have been identified in Mycobacterium tuberculosis H37Rv. The recombinant protein encoded by M. tuberculosis Rv2924c, termed Mtb-Fpg1, was overexpressed, purified and biochemically characterized. The enzyme removed faPy and 5-hydroxycytosine lesions, as well as 8-oxo-7,8-dihydroguanine (8oxoG) opposite to C, T and G. Mtb-Fpg1 thus exhibited substrate specificities typical for Fpg enzymes. Although Mtb-fpg1 showed nearly complete nucleotide sequence conservation in 32 M. tuberculosis isolates, the region upstream of Mtb-fpg1 in these strains contained tandem repeat motifs of variable length. A relationship between repeat length and Mtb-fpg1 expression level was demonstrated in M. tuberculosis strains, indicating that an increased length of the tandem repeats positively influenced the expression levels of Mtb-fpg1. This is the first example of such a tandem repeat region of variable length being linked to the expression level of a bacterial gene

Investigating the coenzyme specificity of phenylacetone monooxygenase from Thermobifida fusca

Type I Baeyer–Villiger monooxygenases (BVMOs) strongly prefer NADPH over NADH as an electron donor. In order to elucidate the molecular basis for this coenzyme specificity, we have performed a site-directed mutagenesis study on phenylacetone monooxygenase (PAMO) from Thermobifida fusca. Using sequence alignments of type I BVMOs and crystal structures of PAMO and cyclohexanone monooxygenase in complex with NADP+, we identified four residues that could interact with the 2′-phosphate moiety of NADPH in PAMO. The mutagenesis study revealed that the conserved R217 is essential for binding the adenine moiety of the nicotinamide coenzyme while it also contributes to the recognition of the 2′-phosphate moiety of NADPH. The substitution of T218 did not have a strong effect on the coenzyme specificity. The H220N and H220Q mutants exhibited a ~3-fold improvement in the catalytic efficiency with NADH while the catalytic efficiency with NADPH was hardly affected. Mutating K336 did not increase the activity of PAMO with NADH, but it had a significant and beneficial effect on the enantioselectivity of Baeyer–Villiger oxidations and sulfoxidations. In conclusion, our results indicate that the function of NADPH in catalysis cannot be easily replaced by NADH. This finding is in line with the complex catalytic mechanism and the vital role of the coenzyme in BVMOs