The cuticle

The nematode cuticle is an extremely flexible and resilient exoskeleton that permits locomotion via attachment to muscle, confers environmental protection and allows growth by molting. It is synthesised five times, once in the embryo and subsequently at the end of each larval stage prior to molting. It is a highly structured extra-cellular matrix (ECM), composed predominantly of cross-linked collagens, additional insoluble proteins termed cuticlins, associated glycoproteins and lipids. The cuticle collagens are encoded by a large gene family that are subject to strict patterns of temporal regulation. Cuticle collagen biosynthesis involves numerous co- and post-translational modification, processing, secretion and cross-linking steps that in turn are catalysed by specific enzymes and chaperones. Mutations in individual collagen genes and their biosynthetic pathway components can result in a range of defects from abnormal morphology (dumpy and blister) to embryonic and larval death, confirming an essential role for this structure and highlighting its potential as an ECM experimental model system

Slip casting and extruding shapes of rhemium with metal oxide additives. Part 2: Development of grain stabilized rhenium parts for resistojets

The adaptation of the powdered particle process used for pure metal oxides to the coprocessing of rhenium oxides suitable to produce pure miniature resistojet hardware has been successful. Both slip casting and extrusion processes were used. The metal oxide ZrO2 was stabilized into the cubic phase with Y2O3, for use as a potentially grain stabilizing additive to rhenium. Straight meter long tubing in two sizes are reported. Tubing suitable for resistojet ohmic heater use of fully fired dimensions of nominally 3.8 mm o.d. x 2.2 mm i.d.. and 1.26 mm o.d. x .45 mm i.d. with 0, 0.5, 1.0 and 5.0% zirconia additives were produced for further study. Photomicrographs of these are discussed. The addition of the metal oxide zirconia to rhenium resulted in more dense and less porous parts. The additions of phase stabilized zirconia most likely act as a sintering aid. Tubes of varying diameter were slip cast which were representative of miniature pressure cases

Slip casting and extruding shapes of rhenium with metal oxide additives. 1: Feasibility demonstration

The feasibility of fabricating small rhenium parts with metal oxide additives by means of slip casting and extrusion techniques is described. The metal oxides, ZrO2 and HfO2 were stabilized into the cubic phase with Y2O3. Additions of metal oxide to the rhenium of up to 15 weight percent were used. Tubes of 17 mm diameter with 0.5 mm walls were slip cast by adapting current ceramic oxide techniques. A complete cast double conical nozzle demonstrated the ability to meet shapes and tolerances. Extrusion of meter long tubing lengths of 3.9 mm o.d. x 2.3 mm i.d. final dimension is documented. Sintering schedules are presented to produce better than 95% of theoretical density parts. Finished machining was found possible were requried by electric discharge machining and diamond grinding

X-ray absorbed QSOs and the QSO evolutionary sequence

Unexpected in the AGN unified scheme, there exists a population of broad-line z~2 QSOs which have heavily absorbed X-ray spectra. These objects constitute 10% of the population at luminosities and redshifts characteristic of the main producers of QSO luminosity in the Universe. Our follow up observations in the submm show that these QSOs are often embedded in ultraluminous starburst galaxies, unlike most QSOs at the same redshifts and luminosities. The radically different star formation properties between the absorbed and unabsorbed QSOs implies that the X-ray absorption is unrelated to the torus invoked in AGN unification schemes. Instead, these results suggest that the objects represent a transitional phase in an evolutionary sequence relating the growth of massive black holes to the formation of galaxies. The most puzzling question about these objects has always been the nature of the X-ray absorber. We present our study of the X-ray absorbers based on deep (50-100ks) XMM-Newton spectroscopy. We show that the absorption is most likely due to a dense ionised wind driven by the QSO. This wind could be the mechanism by which the QSO terminates the star formation in the host galaxy, and ends the supply of accretion material, to produce the present day black hole/spheroid mass ratio.Comment: 4 pages, to appear in conference proceedings "Studying Galaxy Evolution with Spitzer and Herschel

Preliminary design study of hydrogen and ammonia resistojets for prime and auxiliary thrusters

Designs of high performance resistojets for primary and auxiliary propulsion are described.Thruster power for the primary propulsion application was in the 2 to 3 kW range while auxiliary propulsion power per thruster was 0.15 to 0.25 kW. Propellants considered were hydrogen and ammonia. The report described design techniques used to forecast the temperature and energy flux distributions using mathematical modeling by personal microcomputer. BASIC language is used throughout to give the designer rapid interaction and control. Both designs integrate compact first stage coils with concentric tubular heaters. The hybrid heater design allows better thruster power matching with the spacecraft power bus. Projected specific impulse levels were 760 to 830 s for hydrogen and 380 to 410 s for ammonia

XMM-Newton observations of the Seyfert 1 AGN H0557-385

We present XMM-Newton observations of the Seyfert 1 AGN H0557-385. We have conducted a study into the warm absorber present in this source, and using high-resolution RGS data we find that the absorption can be characterised by two phases: a phase with log ionisation parameter xi of 0.50 (where xi is in units of ergs cm/s) and a column of 0.2e21 cm^-2, and a phase with log xi of 1.62 and a column of 1.3e22 cm^-2. An iron K alpha line is detected. Neutral absorption is also present in the source, and we discuss possible origins for this. On the assumption that the ionised absorbers originate as an outflow from the inner edge of the torus, we use a new method for finding the volume filling factor. Both phases of H0557-385 have small volume filling factors (< 1%). We also derive the volume filling factors for a sample of 23 AGN using this assumption and for the absorbers with log xi > 0.7 we find reasonable agreement with the filling factors obtained through the alternative method of equating the momentum flow of the absorbers to the momentum loss of the radiation field. By comparing the filling factors obtained by the two methods, we infer that some absorbers with log xi < 0.7 occur at significantly larger distances from the nucleus than the inner edge of the torus.Comment: Accepted for publication in MNRA

An XMM-Newton observation of the Narrow Line Seyfert 1 Galaxy, Markarian 896

XMM-Newton observations of the NLS1 Markarian 896 are presented. Over the 2-10 keV band, an iron emission line, close to 6.4 keV, is seen. The line is just resolved and has an equivalent width of ~170 eV. The broad-band spectrum is well modelled by a power law slope of gamma ~ 2.03, together with two blackbody components to fit the soft X-ray excess. Using a more physical two-temperature Comptonisation model, a good fit is obtained for an input photon distribution of kT ~ 60eV and Comptonising electron temperatures of ~0.3 and 200 keV. The soft excess cannot be explained purely through the reprocessing of a hard X-ray continuum by an ionised disc reflector.Comment: 6 pages, 4 figures, accepted by MNRA

A design study of hydrazine and biowaste resistojets

A generalized modeling program was adapted in BASIC on a personal computer to compare the performance of four types of biowaste resistojets and two types of hydrazine augmenters. Analyzed biowaste design types were: (1) an electrically conductive ceramic heater-exchanger of zirconia; (2) a truss heater of platinum in cross flow; (3) an immersed bicoiled tubular heater-exchanger; and (4) a nonexposed, refractory metal, radiant heater in a central cavity within a heat exchanger case. Concepts 2 and 3 are designed to have an efficient, stainless steel outer pressure case. The hydrazine design types are: (5) an immersed bicoil heater exchanger and (6) a nonexposed radiant heater now with a refractory metal case. The ceramic biowaste resistojet has the highest specific impulse growth potential at 2000 K of 192.5 (CO2) and 269 s (H2O). The bicoil produces the highest augmenter temperature of 1994 K for a 2073 K heater giving 317 s at .73 overall efficiency. Detailed temperature profiles of each of the designs are shown. The scaled layout drawings of each are presented with recommended materials and fabrication methods