2,122 research outputs found

    The Villalcampo Shear Zone (Zamora, Spain), geometry, kinematics and the physical conditions of the strain

    Get PDF
    [Resumen] En este trabajo se presenta una cartografía detallada de un sistema de cizalla que incluye la zona de cizalla de Villalcampo propiamente dicha y las bandas asociadas. Este sistema tiene carácter regional, afecta a granitos intruidos después de la segunda fase hercínica y a sus encajantes metamórficos en un área de al menos 150 Km2. El estudio geométrico y cinemático de las bandas, la distribución de las rocas de falla, así como el estudio microestructural han permitido interpretar todo el sistema como una cizalla subvenical dextra de carácter dúctil-frágil, que termina hacia el NW en un abanico extensional y que se prolonga hacia el SE en otra amplia área interpretada como un duplex extensional. El valor de la cizalla 'Y es de 1,55 y el desplazamiento mínimo calculado es de 3,7 Km. Todas las bandas de cizalla que incluye el sistema de Villalcampo y las venas o filones asociados pueden relacionarse con un único campo de esfuerzos en el que la trayectoria del esfuerzo principal al, subhorizontal y de dirección aproximadamente N-S sufre una desviación en la zona terminal de la banda en sentido diferente según el labio de que se trate, tal como propone Anderson (1951). Para caracterizar el régimen y los mecanismos de la deformación se ha realizado un análisis microestructural detallado de las rocas de falla y un estudio petrográfico y de la petrofábrica de las milonitas. Se concluye que los yacimientos de oro de Pino están controlados estructuralmente por este sistema de cizalla ya que aparecen en venas extensionales ocupadas por milonitas brechificadas; las condiciones de la deformación de carácter alternativamente dúctil-frágil habrtan permitido la migración de fluidos mineralizadores y el sellado de las fracturas en ciclos repetidos. Se propone como hipótesis que los yacimientos de estaño y wolframio que aparecen en la región de Villaseco-Almaraz de Duero puedan estar controlados también por el duplex extensional de este sistema de cizalla.[Abstract] The present work reports" on a detailed mapping of the Villalcampo shear system, including the Villalcampo shear itself together with related shears and veins. This regional shear system affects granites intruded after the second hercynian deformation phase and their metamorphic host rocks over an area of about 150 Km2. A st~ctural study of the shear bands, encompassing geometric and kinematic criteria and also the distribution of fault rocks, has allowed the authors to interpret the whole of the system as a ductile-fragile subvenical dextral shear spaying to the NW in an extensional fan that is prolonged to the SE over a broad area interpreted as an extensional duplex. The value of the shear strain, 'Y = 1.55, and the minimum displacement, s = 3.700 m, is calculated. The distribution of shear bands and veins is coherent with the notion of a single stress field where the principal stress, o"¡, is subhorizontal and has a N-S trajectory that deviates to the tips of the main shear, as proposed by Anderson (1951). With a view to gaining insight into the shearing regimen and the physical conditions of the deformation, a microestructural exploration of the fault rocks was carried out together with a petrographical and petrofabric study of the mylonites. It is concluded that the Pino ore veins -with Au mineralization- are structurally controlled by this shear system because they are related to the extensional veins infilled by brecchiated mylonites. Additionally, it is proposed that the deformation conditions would have alternated between brittle and ductile; this would have permited the migration and sealing of microfractures by mineralizing fluids during repeated cycles. As an hypothesis, it is proposed that the Sn and W ores situated in -the Villaseco -Almaraz area are possibly related to the extensional duplex

    Alteraciones de la superficie del cuerpo vertebral en una población medieval de Logroño (s. XI y XII)

    Full text link
    X Congreso Nacional de Paleopatología. Univesidad Autónoma de Madrid, septiembre de 200

    Chiral transition-metal complexes as Brønsted-acid catalysts for the asymmetric Friedel-Crafts hydroxyalkylation of indoles.

    Get PDF
    The Friedel-Crafts reaction between 3,3,3-trifluoropyruvates and indoles is efficiently catalysed by the iridium complex [(η5-C 5Me5)Ir{(R)-Prophos}(H2O)][SbF 6]2 (1) with up to 84% ee. Experimental data and theoretical calculations support a mechanism involving the Brønsted-acid activation of the pyruvate carbonyl by the protons of the coordinated water molecule in 1. Water is not dissociated during the process and, therefore, the catalytic reaction occurs with no direct interaction between the substrates and the metal. This journal is © the Partner Organisations 2014.The authors acknowledge the Ministerio de Economía y Competitividad (MINECO, Grants CTQ2006-03030/BQU, CTQ2009-10303/BQU, CTQ2011-27033 and Consolider Ingenio 2010 CSD2006-003), Gobierno de Aragón (Grupo Consolidado: Catálisis Homogénea Enantioselectiva), Generalitat de Catalunya (2009SGR0259) and the ICIQ foundation for financial support. A. S. and R. R. acknowledge MINECO for predoctoral fellowships. S. D.-G. acknowledges MINECO for a “Torres Quevedo” contract.Peer Reviewe

    Polarized laser light scattering applied to surface morphology characterization of epitaxial III–V semiconductor layers

    Get PDF
    11 pages.-- PACS: 68.35.Bs; 81.05.Ea; 81.15.Hi; 78.35.+c; 78.66.FdIn this paper, we analyze typical morphologies of epitaxial III–V semiconductor layers by using a polarized laser light scattering technique. Crosshatched topographies, which are developed during heteroepitaxial growth, are studied. A sample with an intentionally high density of oval defects is also explored to establish how the laser light scattering pattern is affected by the presence of these defects, which are unavoidable in the epitaxial layers grown by molecular beam epitaxy. The former topographies produce a scattered light pattern that is highly anisotropic, with the intensity concentrated along two preferential directions; the latter defects give rise to a fairly isotropic pattern. Employing a perturbation-theoretical model, whose applicability and consistency are explicitly demonstrated by our results, the surface power spectral density is retrieved from the angle-resolved light scattering experimental data. For the samples exhibiting crosshatched topography, the scattering measurements provide information that allows us to model the roughness of the surface in terms of two quasi-one-dimensional, anisotropic components, and one two-dimensional, isotropic, long-range background. The root mean square heights and the typical lateral distances between ridges are obtained in quantitative agreement with the values extracted from the atomic force microscopy measurements. For the sample presenting oval defects, we consider their contribution to the surface power spectral density by means of a simple model of randomly distributed particles on a surface, and we compare the resulting power spectral density with typical behavior found in the literature for good-morphology GaAs layers. With the help of the ex situ information thus obtained, we also discuss the implementation of the light scattering technique for in situ monitoring during epitaxial growth.The authors wish to acknowledge the Spanish CICYT for financial support under Project No. TIC96-1020-C02. M.U.G. thanks the Consejería de Educación y Cultura de la Comunidad de Madrid for financial support. J.A.S.-G. acknowledges financial support from the Spanish DGESIC Grant No. PB97-1221.Spanish CICYTConsejería de Educación y Cultura de la Comunidad de MadridPeer reviewe

    Aspectos clave del diseño hidrológico de diques forestales en el arroyo de los Santos (Ávila)

    Get PDF
    Producción CientíficaUna actuación típica en los proyectos de restauración hidrológico-forestal es el diseño de diques forestales. Como parte de la información de base para el dimensionamiento de este tipo de obras hidráulicas es preciso determinar la crecida de cálculo, la cual deberá ser evacuada ordenadamente por los dispositivos de desagüe que estén operativos en la estructuras. Durante este mismo evento de diseño, el proceso hidrológico de propagación de la crecida en la cubeta del dique hace que el dimensionamiento correcto del vertedero y los mechinales sea un aspecto relevante del diseño hidráulico de un dique. Se han dimensionado dos diques forestales de retención y laminación de crecidas en el arroyo de los Santos (Ávila), atendiendo al comportamiento hidrológico más desfavorable esperado de la cuenca para la vida útil de los diques. Mediante modelaje hidrológico con HEC-HMS se han obtenido los caudales de diseño, y modelado el tránsito de la crecida en las estructuras

    Superoxide dismutase and catalase in marine bioluminescent bacteria

    Get PDF
    Han sido estudiadas la catalasa y la superóxido dismutasa (SOD) de bacterias bioluminiscentes marinas. Hemos encontrado varios isoenzimas de catalasa y un isoenzima de superóxido dismutasa y se ha observado que a menor luminiscencia los niveles de catalasa son mayores. Una variante de Photobacterium phosphoreum var. K (cepa mutante que carece de bioluminiscencia) mostró los máximos niveles de catalasa. Hay dos tipos de catalasas en esta estirpe, una de pI 7,2 que es inhibida por el 3-amino, 1,2,4-triazol y otros isoenzimas que son resistentes a la acción de este inhibidor. Todas las catalasas de estas bacterias bioluminiscentes marinas son hemoproteínas, ya que son inhibidas por la azida y el cianuro. El isoenzima de SOD es una Fe-SOD.Catalase and superoxide dismutase (SOD) were studied in strains of marine bioluminescent bacteria. We found several isozymes of catalase in these strains and only one isozyme of superoxide dismutase. We observed that catalase levels rose as bioluminiscence emission fell. A dark strain of Photobacterium phosphoreumvar. K showed the maximun levels of catalase. There are two types of catalases in this strain: an isozyme of pI 7.2 inhibited by 3-amino, 1, 2, 4-triazole and others isozyrnes resistent to this inhibitor. All isozymes of catalase from these bioluminescent marine bacteria are hemo-proteins, since they were inhibited by cianyde and azide. The single isozyme of SOD is a Fe-SOD.Instituto Español de Oceanografí

    Bioluminescent marine bacteria on the Gran Canaria coast

    Get PDF
    Han sido aisladas bacterias bioluminiscentes en aguas superficiales costeras de la isla de Gran Canaria y en la superficie y el contenido intestinal de Sarpa salpa (Linnaeus, 1758), pez muy común en las islas Canarias. Las especies aisladas fueron Vibrio splendidus biovar 1, Vibrio logei, Vibrio fischeri y Photobacterium phosphoreum. La población de bacterias bioluminiscentes en estas aguas superficiales fluctúa considerablemente, desde 50 000 unidades formadoras de colonias por litro (ufc/l) en los meses de verano a 3 000 ufc/l en invierno. Hemos encontrado una correlación positiva entre la temperatura del agua y el número de bacterias bioluminiscentes.Bioluminescent bacteria were isolated on coastal surface waters, and on the surface and in the gastrointestinal tract of Sarpa salpa (Linnaeus, 1758) (a very common fish in the Canary Islands) off Gran Canaria Island. The species isolated were: Vibrio splendidus biovar 1; Vibrio logei; Vibrio fischeri and Photobacterium phosphoreum. The population of biolumineseent bacteria in these coastal surfaee waters fluctuated considerably, being as high as 50 000 cfu/l in the summer and as low as 3 000 cfu/l in the winter. There is a positive correlation between water temperature and the number of bioluminescent bacteria.Instituto Español de Oceanografí
    corecore