187 research outputs found
Coupling a model of human thermoregulation with computational fluid dynamics for predicting human-environment interaction
This paper describes the methods developed to couple a commercial CFD program with a multi-segmented model of human thermal comfort and physiology. A CFD model is able to predict detailed temperatures and velocities of airflow around a human body, whilst a thermal comfort model is able to predict the response of a human to the environment surrounding it. By coupling the two models and exchanging information about the heat transfer at the body surface the coupled system can potentially predict the response of a human body to detailed local environmental conditions. This paper presents a method of exchanging data, using shared files, to provide a means of dynamically exchanging simulation data with the IESD-Fiala model during the CFD solution process. Additional
code is used to set boundary conditions for the CFD simulation at the body surface as determined by the IESD-Fiala model and to return information about local environmental conditions adjacent to the body surface as determined by the CFD simulation. The coupled system is used to model a human subject in a naturally ventilated environment. The resulting ventilation flow pattern agrees well with other numerical and
experimental work
Acute taurine supplementation enhances thermoregulation and endurance cycling performance in the heat
This study investigated the effects of oral taurine supplementation on cycling time to exhaustion at a fixed-intensity and thermoregulation in the heat. In a double-blind, randomised crossover design, 11 healthy males participated in a time to exhaustion test in the heat (35°C, 40% RH), cycling at the power output associated with ventilatory threshold, 2 h after ingesting: Taurine (50 mg kg-1) or placebo (3 mg kg-1 maltodextrin). Core and mean skin temperature, mean sweat rate, heart rate, rating of perceived exertion (RPE), thermal comfort and thermal sensation were measured during exercise and blood lactate concentration (B[La]) was measured after exercise. Taurine supplementation increased time to exhaustion by 10% (25.16 min vs. 22.43 min, p = 0.040), end sweat rate by 12.7% (687 nL min-1 vs. 600 nL min-1, p = 0.034) and decreased B[La] by 16.5% (5.75 mmol L-1 vs. 6.85 mmol L-1, p = 0.033). Core temperature was lower in the final 10% of the time to exhaustion (38.5°C vs. 38.1°C, p = 0.049). Taurine supplementation increased time to exhaustion and local sweating, while decreasing RPE and core temperature in the later stages of exercise, as well as reducing post-exercise B[La]. This study provides the evidence of taurine's role in thermoregulatory processes. These findings have implications for the short-term preparation strategies of individuals exercising in the heat. Based on these findings, a single dose of taurine 2 h prior to training or competition would provide an ergogenic and thermoregulatory effect
Observations on Infrared Radiation at the Workplace
A discussion of the use of radiant heating in sedentary workplaces is presented. The advantages of the approach with respect to energy conservation are emphasized along with accompanying effects on worker comfort and performance. The results of a study which investigated infrared heating effectiveness for secretarial workers are briefly presented.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline
Internal and external cooling methods and their effect on body temperature, thermal perception and dexterity
© 2018 The Authors. Published by PLOS. This is an open access article available under a Creative Commons licence.
The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.1371/journal.pone.0191416© 2018 Maley et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Objective The present study aimed to compare a range of cooling methods possibly utilised by occupational workers, focusing on their effect on body temperature, perception and manual dexterity. Methods Ten male participants completed eight trials involving 30 min of seated rest followed by 30 min of cooling or control of no cooling (CON) (34C, 58% relative humidity). The cooling methods utilised were: ice cooling vest (CV0), phase change cooling vest melting at 14C (CV14), evaporative cooling vest (CVEV), arm immersion in 10C water (AI), portable water-perfused suit (WPS), heliox inhalation (HE) and ice slushy ingestion (SL). Immediately before and after cooling, participants were assessed for fine (Purdue pegboard task) and gross (grip and pinch strength) manual dexterity. Rectal and skin temperature, as well as thermal sensation and comfort, were monitored throughout. Results Compared with CON, SL was the only method to reduce rectal temperature (P = 0.012). All externally applied cooling methods reduced skin temperature (P0.05). Conclusion The present study observed that ice ingestion or ice applied to the skin produced the greatest effect on rectal and skin temperature, respectively. AI should not be utilised if workers require subsequent fine manual dexterity. These results will help inform future studies investigating appropriate pre-cooling methods for the occupational worker.This project is financially supported by the US Government through the Technical Support Working Group within the Combating Terrorism Technical Support Office.Published versio
Extracellular Hsp72 concentration relates to a minimum endogenous criteria during acute exercise-heat exposure
Extracellular heat-shock protein 72 (eHsp72) concentration increases during exercise-heat stress when conditions elicit physiological strain. Differences in severity of environmental and exercise stimuli have elicited varied response to stress. The present study aimed to quantify the extent of increased eHsp72 with increased exogenous heat stress, and determine related endogenous markers of strain in an exercise-heat model. Ten males cycled for 90 min at 50% O2peak in three conditions (TEMP, 20°C/63% RH; HOT, 30.2°C/51%RH; VHOT, 40.0°C/37%RH). Plasma was analysed for eHsp72 pre, immediately post and 24-h post each trial utilising a commercially available ELISA. Increased eHsp72 concentration was observed post VHOT trial (+172.4%) (P<0.05), but not TEMP (-1.9%) or HOT (+25.7%) conditions. eHsp72 returned to baseline values within 24hrs in all conditions. Changes were observed in rectal temperature (Trec), rate of Trec increase, area under the curve for Trec of 38.5°C and 39.0°C, duration Trec ≥ 38.5°C and ≥ 39.0°C, and change in muscle temperature, between VHOT, and TEMP and HOT, but not between TEMP and HOT. Each condition also elicited significantly increasing physiological strain, described by sweat rate, heart rate, physiological strain index, rating of perceived exertion and thermal sensation. Stepwise multiple regression reported rate of Trec increase and change in Trec to be predictors of increased eHsp72 concentration. Data suggests eHsp72 concentration increases once systemic temperature and sympathetic activity exceeds a minimum endogenous criteria elicited during VHOT conditions and is likely to be modulated by large, rapid changes in core temperature
the urban corridor of venice and the case of padua
Urban Heat Island effect was widely studied in large cities around the world, more rarely in medium size ones. The chapter reports on the study of the UHI phenomenon in Padua, a medium size city of the North-East of Italy, one of the most industrialized and developed parts of the country. Experimental measurements were carried out during 2012 summer, recording the main thermo-hygrometric variables (dry-bulb temperature, relative humidity, global solar radiation) by a mobile survey along an exact path crossing different zones of the city area: urban, sub-urban and rural. The analysis of the data highlights the presence of UHI effect with different magnitudes in function of the zone of the city. In the city centre, an historical zone, the effect was up to 7 °C. In the meantime, some measurements in situ were carried out in order to evaluate other thermal comfort indexes rather than air temperature and humidity only: wind velocity and mean radiant temperature (besides the other meteorological variables) in some characteristic sites of the city area like historic centre, high and low density populated residential zones, industrial zone, rural zone, were recorded. In particular, a very famous square of the city (Prato della Valle) was analysed: it can be considered representative of the phenomenon because of the size and the very different characteristics from the UHI effect point of view. RayMan simulation model was used to calculate some outdoor comfort indexes and Envimet model was further used to evaluate the effect of some mitigation strategies in characteristic sites of the city
Clothing insulation and temperature, layer and mass of clothing under comfortable environmental conditions
This study was designed to investigate the relationship between the microclimate temperature and clothing insulation (Icl) under comfortable environmental conditions. In total, 20 subjects (13 women, 7 men) took part in this study. Four environmental temperatures were chosen: 14??C (to represent March/April), 25??C (May/June), 29??C (July/August), and 23??C (September/October). Wind speed (0.14ms-1) and humidity (45%) were held constant. Clothing microclimate temperatures were measured at the chest (Tchest) and on the interscapular region (Tscapular). Clothing temperature of the innermost layer (Tinnermost) was measured on this layer 30 mm above the centre of the left breast. Subjects were free to choose the clothing that offered them thermal comfort under each environmental condition. We found the following results. 1) All clothing factors except the number of lower clothing layers (Llower), showed differences between the different environmental conditions (P<0.05). The ranges of Tchest were 31.6 to 33.5??C and 32.2 to 33.4??C in Tscapular. The range of Tinnermost was 28.6 to 32.0??C. The range of the upper clothing layers (Lupper) and total clothing mass (Mtotal) was 1.1 to 3.2 layers and 473 to 1659 g respectively. The range of Icl was 0.78 to 2.10 clo. 2) Post hoc analyses showed that analysis of Tinnermost produced the same results as for that of Icl. Likewise, the analysis of Lupper produced the same result as the analysis of the number of total layers (Ltotal) within an outfit. 3) Air temperature (ta) had positive relationships with Tchest and Tscapular and with Tinnermost but had inverse correlations with Icl, Mtotal, Lupper and Ltotal. Tchest, Tscapular, and Tinnermost increased as ta rose. 4) Icl had inverse relationships with Tchest and Tinnermost, but positive relationships with Mtotal, Lupper and Ltotal. Icl could be estimated by Mtotal, Lupper, and Tscapular using a multivariate linear regression model. 5) Lupper had positive relationships with Icl and Mtotal, but Llower did not. Subjects hardly changed Llower under environmental comfort conditions between March and October. This indicates that each of the Tchest, Mtotal, and Lupper was a factor in predicting Icl. Tinnermost might also be a more influential factor than the clothing microclimate temperature.open1
- …