Potential Response of Soil-Borne Fungal Pathogens Affecting Crops to a Scenario of Climate Change in Europe

A study was carried out on the potential response of soil-borne pathogens causing crop yield losses under a climate change scenario in Europe. A controlled chamber set of experiments was carried out to quantify pathogen response to temperature using pure colonies of three soil-borne fungi, representative of low (Fusarium nivale), medium-high (Athelia rolfsii) and high (Macrophomina phaseolina) temperature requirements. A generic model to simulate fungal growth response to temperature based on these experiments was developed and linked to a soil temperature model component, and to components to simulate soil water content accounting for crop water uptake of potential hosts. Pathogens relative growth was simulated over Europe using the IPCC A1B emission scenario as realization of the Hadley-CM3 global climate model, available from the European Commission and processed for use with biophysical models. The simulations resulting from using the time span centred on 2030 were compared to the baseline, centred on the year 2000, using a sample of 30 years of daily weather. The general trend of soil-borne pathogens response to the scenario of climate change is a relative increase in growth in colder areas of Europe, as a function of their temperature requirements. Projections of F. nivale in the future indicate a relative increase of this winter pathogen of wheat in Northern European countries. A. rolfsii and M. phaseolina, two soil-borne pathogens typical of warmer agricultural areas, could find more favourable conditions in areas of the Central Europe, but they differentiated in Southern Europe where A. rolfsii resulted affected by summer soil temperatures above optimum

Pressure investigation of NASA leading edge vortex flaps on a 60 deg Delta wing

Pressure distributions on a 60 deg Delta Wing with NASA designed leading edge vortex flaps (LEVF) were found in order to provide more pressure data for LEVF and to help verify NASA computer codes used in designing these flaps. These flaps were intended to be optimized designs based on these computer codes. However, the pressure distributions show that the flaps wre not optimum for the size and deflection specified. A second drag-producing vortex forming over the wing indicated that the flap was too large for the specified deflection. Also, it became apparent that flap thickness has a possible effect on the reattachment location of the vortex. Research is continuing to determine proper flap size and deflection relationships that provide well-behaved flowfields and acceptable hinge-moment characteristics

An experimental study of pressures on 60 deg Delta wings with leading edge vortex flaps

An experimental study was conducted in the Virginia Tech Stability Wind Tunnel to determine surface pressures over a 60 deg sweep delta wing with three vortex flap designs. Extensive pressure data was collected to provide a base data set for comparison with computational design codes and to allow a better understanding of the flow over vortex flaps. The results indicated that vortex flaps can be designed which will contain the leading edge vortex with no spillage onto the wing upper surface. However, the tests also showed that flaps designed without accounting for flap thickness will not be optimum and the result can be oversized flaps, early flap vortex reattachment and a second separation and vortex at the wing/flap hinge line

Theoretical and numerical aspects of a non-stationary preconditioned iterative method for linear discrete ill-posed problems

This work considers some theoretical and computational aspects of the recent paper (Buccini et al., 2021), whose aim was to relax the convergence conditions in a previous work by Donatelli and Hanke, and thereby make the iterative method discussed in the latter work applicable to a larger class of problems. This aim was achieved in the sense that the iterative method presented convergences for a larger class of problems. However, while the analysis presented is correct, it does not establish the superior behavior of the iterative method described. The present note describes a slight modification of the analysis that establishes the superiority of the iterative method. The new analysis allows to discuss the behavior of the algorithm when varying the involved parameters, which is also useful for their empirical estimation

Fractional graph Laplacian for image reconstruction

Image reconstruction problems, like image deblurring and computer tomography, are usually ill-posed and require regularization. A popular approach to regularization is to substitute the original problem with an optimization problem that minimizes the sum of two terms, an term and an term with . The first penalizes the distance between the measured data and the reconstructed one, the latter imposes sparsity on some features of the computed solution. In this work, we propose to use the fractional Laplacian of a properly constructed graph in the term to compute extremely accurate reconstructions of the desired images. A simple model with a fully automatic method, i.e., that does not require the tuning of any parameter, is used to construct the graph and enhanced diffusion on the graph is achieved with the use of a fractional exponent in the Laplacian operator. Since the fractional Laplacian is a global operator, i.e., its matrix representation is completely full, it cannot be formed and stored. We propose to replace it with an approximation in an appropriate Krylov subspace. We show that the algorithm is a regularization method under some reasonable assumptions. Some selected numerical examples in image deblurring and computer tomography show the performance of our proposal

Late thoracic pseudo-aneurysm causing collapse of vascular prostheses

The outcome of patients with thoracic vascular prostheses is usually uneventful. We report two cases of collapse of thoracic vascular prostheses which occurred ten and forty years, respectively, after the implantation. The diagnoses were obtained preoperatively by CT-scan or NMR and angiography. Both patients were successfully treated with prosthetic replacement by an open approach

Per Oral Endoscopic Myotomy for the Management of Achalasia in a Patient with Prior Lap Band, Sleeve Gastrectomy, and Roux-en-Y Gastric Bypass

Introduction: Achalasia after bariatric surgery is a rare pathological entity. Nonetheless, several cases have been described in literature. Per oral endoscopic myotomy has recently emerged as the preferred approach for the management of esophageal motility disorders. Material and Methods: We report a video case of POEM performed in a female patient with prior multiple bariatric surgical procedures. In her past medical history, she underwent to laparoscopic lap band, sleeve gastrectomy, and Roux-Y-gastric bypass. Results: POEM was carried out without complication. Myotomy was performed only for 1 cm below the cardias due to the presence of the gastro-jejunal anastomosis. Post-operative course was uneventful and oral diet was restarted after one day. At 2 months follow-up, the patient is asymptomatic with no weight regain. Conclusion: We report the first case of POEM after three different bariatric surgical procedure. Fibrosis due to prior interventions did not hampered POEM procedure, and the shorter myotomy due to the presence of small gastric pouch did not reduced its efficacy

Current results and remaining challenges of trans-catheter aortic valve replacement expansion in intermediate and low risk patients

TAVR has become the standard treatment in patients at increased surgical risk (STS or EuroSCORE II 654% or logistic EuroSCORE I 65 10% or other risk factors not included in these scores such as frailty, porcelain aorta, sequelae of chest radiation) and it is increasingly being performed in patients at intermediate to low (STS or EuroSCORE II <4% or logistic EuroSCORE I < 10%) surgical risk. Although non-inferiority has been demonstrated in intermediate and low-risk patients, several challenges need to be addressed before expansion to younger patients. Current trends, trials results, and remaining challenges are summarized and discussed in this review

Grinding, Melting and Reshaping of EoL Thermoplastic Polymers Reinforced with Recycled Carbon Fibers

This article assesses the technical feasibility of a recycling process based on grinding, melting and re-shaping of carbon fibers (CFs) reinforced thermoplastic polymers, in order to obtain new products that can be introduced in different markets, depending on mechanical properties retained. The idea at the basis of our study is that this kind of recycling process lies at the edge of the stages of recycling and re-use of materials, considering that the latter is preferable when considering the waste management hierarchy. Lower cost and similar mechanical strength of virgin CFs allowed the spread of recycled CFs in the automotive sector in the form of composite materials. Taking into account the Directive 2000/53/EC that sets out measures to prevent and limit waste from end-of-life (EoL) vehicles and their components, and ensures that where possible this is reused, recycled or recovered, we considered worth to investigate the recyclability of composite materials made with recycled CFs when they will reach the state of EoL materials. Considering this premise, an additional scope of this paper is therefore to provide some useful information about the possibility to perform a multiple closed loop recycling of rCF thermoplastic composites. Experiments carried out demonstrated that re-shaping of composites is technically feasible. Some square plates were produced without any setback. The mass balance of the recycling process demonstrated that about 88% of the EoL material can be recovered. Calculation of energy consumption showed that approximately 16 MJ are necessary in the treatment of 1 kg of EoL composites