Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Performance and storage requirements of topology-conserving maps for robot manipulator control

A new programming paradigm for the control of a robot manipulator by learning the mapping between the Cartesian space and the joint space (inverse Kinematic) is discussed. It is based on a Neural Network model of optimal mapping between two high-dimensional spaces by Kohonen. This paper describes the approach and presents the optimal mapping, based on the principle of maximal information gain. It is shown that Kohonens mapping in the 2-dimensional case is optimal in this sense. Furthermore, the principal control error made by the learned mapping is evaluated for the example of the commonly used PUMA robot, the trade-off between storage resources and positional error is discussed and an optimal position encoding resolution is proposed

Robot Manipulators

Robot manipulators are developing more in the direction of industrial robots than of human workers. Recently, the applications of robot manipulators are spreading their focus, for example Da Vinci as a medical robot, ASIMO as a humanoid robot and so on. There are many research topics within the field of robot manipulators, e.g. motion planning, cooperation with a human, and fusion with external sensors like vision, haptic and force, etc. Moreover, these include both technical problems in the industry and theoretical problems in the academic fields. This book is a collection of papers presenting the latest research issues from around the world

Integration of the hybrid-structure haptic interface: HIPHAD v1.0

Design, manufacturing, integration and initial test results of the 6-DoF haptic interface, HIPHAD v1.0, are presented in this paper. The hybrid haptic robot mechanism is composed of a 3-DoF parallel platform manipulator, R-Cube, for translational motions and a 3-DoF serial wrist mechanism for monitoring the rotational motions of the handle. The device is capable of displaying point-type of contact since only the R-Cube mechanism is actuated. The dimensions and the orientation of the R-Cube mechanism are reconfigured to comply with the requirements of the haptic system design criteria. The system has several advantages such as relatively trivial kinematical analysis, compactness and high stiffness. The integration of the system along with its mechanism, data acquisition card (DAQ), motor drivers, motors, position sensors, and computer control interface are outlined.Marie Curie International Reintegration Grant within the 7th European Community Framework Programm

Modeling, Analysis, Force Sensing and Control of Continuum Robots for Minimally Invasive Surgery

This dissertation describes design, modeling and application of continuum robotics for surgical applications, specifically parallel continuum robots (PCRs) and concentric tube manipulators (CTMs). The introduction of robotics into surgical applications has allowed for a greater degree of precision, less invasive access to more remote surgical sites, and user-intuitive interfaces with enhanced vision systems. The most recent developments have been in the space of continuum robots, whose exible structure create an inherent safety factor when in contact with fragile tissues. The design challenges that exist involve balancing size and strength of the manipulators, controlling the manipulators over long transmission pathways, and incorporating force sensing and feedback from the manipulators to the user. Contributions presented in this work include: (1) prototyping, design, force sensing, and force control investigations of PCRs, and (2) prototyping of a concentric tube manipulator for use in a standard colonoscope. A general kinetostatic model is presented for PCRs along with identification of multiple physical constraints encountered in design and construction. Design considerations and manipulator capabilities are examined in the form of matrix metrics and ellipsoid representations. Finally, force sensing and control are explored and experimental results are provided showing the accuracy of force estimates based on actuation force measurements and control capabilities. An overview of the design requirements, manipulator construction, analysis and experimental results are provided for a CTM used as a tool manipulator in a traditional colonoscope. Currently, tools used in colonoscopic procedures are straight and exit the front of the scope with 1 DOF of operation (jaws of a grasper, tightening of a loop, etc.). This research shows that with a CTM deployed, the dexterity of these tools can be increased dramatically, increasing accuracy of tool operation, ease of use and safety of the overall procedure. The prototype investigated in this work allows for multiple tools to be used during a single procedure. Experimental results show the feasibility and advantages of the newly-designed manipulators

Kinematics and Robot Design I, KaRD2018

This volume collects the papers published on the Special Issue “Kinematics and Robot Design I, KaRD2018” (https://www.mdpi.com/journal/robotics/special_issues/KARD), which is the first issue of the KaRD Special Issue series, hosted by the open access journal “MDPI Robotics”. The KaRD series aims at creating an open environment where researchers can present their works and discuss all the topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”. KaRD2018 received 22 papers and, after the peer-review process, accepted only 14 papers. The accepted papers cover some theoretical and many design/applicative aspects

Design of a six degree-of-freedom haptic hybrid platform manipultor

Thesis (Master)--Izmir Institute of Technology, Mechanical Engineering, Izmir, 2010Includes bibliographical references (leaves: 97-103)Text in English; Abstract: Turkish and Englishxv, 115 leavesThe word Haptic, based on an ancient Greek word called haptios, means related with touch. As an area of robotics, haptics technology provides the sense of touch for robotic applications that involve interaction with human operator and the environment. The sense of touch accompanied with the visual feedback is enough to gather most of the information about a certain environment. It increases the precision of teleoperation and sensation levels of the virtual reality (VR) applications by exerting physical properties of the environment such as forces, motions, textures. Currently, haptic devices find use in many VR and teleoperation applications. The objective of this thesis is to design a novel Six Degree-of-Freedom (DOF) haptic desktop device with a new structure that has the potential to increase the precision in the haptics technology. First, previously developed haptic devices and manipulator structures are reviewed. Following this, the conceptual designs are formed and a hybrid structured haptic device is designed manufactured and tested. Developed haptic device.s control algorithm and VR application is developed in Matlab© Simulink. Integration of the mechanism with mechanical, electromechanical and electronic components and the initial tests of the system are executed and the results are presented. According to the results, performance of the developed device is discussed and future works are addressed

Design and control of a loader mechanism for the NMBU agricultural robot

Despite the development of new technologies, manual labour still continuous to play a large role within most modern agricultural operations, especially during harvest. Consequently, there is an increasing demand for new machines to reduce labour as a mean to limit costs, while increasing efficiency in a sustainable manner. This thesis concern itself with the design of a mechanism and control system for a robot arm that can substitute workers in logistical operations during strawberry harvest. More specifically, by lifting berry crates onto a robot platform and transporting them from the fields and to the packaging facilities. The robot arm is to be mounted on the platform composing a vehicle- manipulator system. As this thesis is connected to a general research project on agricultural robotics at the Norwegian University of Life Sciences, the chosen platform is the associated field robot Thorvald II. The thesis is divided into two parts, where Part I concerns the mechanical design of the robot arm, while Part II propose a system for controlling the mechanism. The design development process has involved assessments of available solutions before selecting components on the basis of controllability, mechanical properties and costs. The process of selection in Part II is however, based on finding solutions that are compatible with the robot platform’s network (Controller Area Network) and operating system (Robotic Operating System). Part I: Design and Mechanics The design of the robot arm presented in this thesis begun with a preliminary feasibility study conducted by Bjurbeck in September 2016. Following the assessment of this study, the robot arm is designed to have two degrees of freedom operating in the xz-plane. When mounted on the platform, the arm will be free to operate in a 3-dimensional space, as the platform moves in x and y-direction, and rotates around the z-axis. The arm is assembled from two parallel link pairs made from rectangular aluminium tubes, and a revolute and prismatic joint. Both joints are actuated by LinAk LA36 linear electric actuators. The end effector of the arm is a gripper head designed to grasp the handles of the strawberry crate. The gripper head is self-aligning with the crate’s orientation in order to reduce the precision of control needed to envelop and grasp the crate. The frame of the gripper head is made from aluminium angle profiles and sheet metal. A worm drive DC motor actuate the gripper claws via a double link mechanism. Part II: Modeling and Control The geometry of the design presented in Part I is modelled mathematically and the inverse kinematics solved analytically. The kinematics will be used in future implementation of a position control system. Two RoboteQ SDC2160 dual-channel controllers are chosen to control all four actuator mo- tors. The linear actuators are controlled in closed loop position tracking mode with absolute feedback. The gripper motor is controlled in open loop mode with end stop switches detecting the position of the claws. Experiments was conducted to match the controllers with the actuator motors. The experiments revealed firmware issues with the controller. The experiments also affirmed the controller need a script to operate the actuators efficiently. The thesis provides the foundations to build a prototype and write an operating script to test the mechanical design and control system.Til tross for den stadige utviklingen av ny teknologi spiller manuelt arbeid fortsatt en stor rolle i moderne landbruk, særlig i innhøsting. På grunn av den store arbeidkraften som trengs er det en stadig større etterspørsel etter nye maskiner som kan redusere behovet for manuelt arbeid for å redusere utgifter og effektivisere gårdsbruk på en bærekraftig måte. Denne masteroppgaven omhandler det mekaniske designet og reguleringssystemet til en robotarm laget for å kunne erstatte arbeidere i oppgaver tilknyttet logistikk ved innhøsting av jordbær. Dette gjøres ved at armen løfter kasser med bær opp på en robotplattform som transporterer kassene fra jordet og til et pakkeri. Robotarmen er da montert oppå plattformen. Siden oppgaven er tilknyttet et forskningsprosjekt i landbruksrobotikk ved Norges miljø- og biovitenskapelige universitet, var det naturlig å velge den universitetets robot Thorvald II som plattform.submittedVersionM-MP

Remote robot manipulator coupled with remote-controlled guide vehicle for soil sampling in hazardous waste sites

The important initial step for remediation of hazardous waste is contaminant analysis since the cleanup operation can not begin until the contaminants in hazardous waste sites have been clearly identified. Ames Laboratory, one of the U.S. Department of Energy sites, has developed a robotic sampling system for automation of real-time contaminant analysis in situ which will provide the advantage of lowering the cost per sample, eliminating personnel exposure to hazardous environments, and allowing quicker results. Successful accomplishment of real-time contaminant analysis will require a remote manipulator to perform the sampling tasks in remote and unstructured surroundings, and a remote-controlled guide vehicle to move a remote manipulator into the desired sampling location;This thesis focuses on the design and construction of a remote-controlled guide vehicle to move the robotic sampling system into the contaminated field to obtain soil samples at the desired locations, the development of an integrated dynamic model of a remote manipulator, the identification of dynamic parameters in the integrated dynamic model, and the design of a mobile robotic sampling system. A four-wheeled vehicle prototype has been constructed and its performance tested manually in the field to verify the design requirements. To remotely control the vehicle, mechanical requirements to activate the brake, throttle, transmission, and steering linkages were determined based on experimental results. A teleoperated control utilizing hundred feet long umbilical cords was first employed to remotely control the vehicle. Next, the vehicle was modified to remotely operate in the field by radio control without the aid of long umbilical cords, satisfying all the design specifications;To reduce modeling error in the robotic system, the integrated dynamic system comprised of a remote manipulator (located on a trailer pulled by the remote-controlled guide vehicle) and its drive system has been modeled. The friction model as a function of velocity is included. The dynamic parameters such as velocity-dependent friction and gravity torque in the integrated dynamic model have been determined based on experimental results;Finally, a robotic arm, a sampling tool, and a soil recovery fixture for a mobile robotic sampling system to be mounted on the remote-controlled guide vehicle have been designed and analyzed. The integrated dynamic model for the robotic arm (mounted on the remote-controlled guide vehicle) and its drive system has also been developed