A survey on fault diagnosis in wireless sensor networks

Wireless sensor networks (WSNs) often consist of hundreds of sensor nodes that may be deployed in relatively harsh and complex environments. In views of hardware cost, sensor nodes always adopt relatively cheap chips, which makes these nodes become error-prone or faulty in the course of their operation. Natural factors and electromagnetic interference could also influence the performance of the WSNs. When sensor nodes become faulty, they may have died which means they cannot communicate with other members in the wireless network, they may be still alive but produce incorrect data, they may be unstable jumping between normal state and faulty state. To improve data quality, shorten response time, strengthen network security, and prolong network lifespan, many studies have focused on fault diagnosis. This survey paper classifies fault diagnosis methods in recent five years into three categories based on decision centers and key attributes of employed algorithms: centralized approaches, distributed approaches, and hybrid approaches. As all these studies have specific goals and limitations, this paper tries to compare them, lists their merits and limits, and propose potential research directions based on established methods and theories

Fault Diagnosis Algorithms for Wireless Sensor Networks

The sensor nodes in wireless sensor networks (WSNs) are deployed in unattended and hostile environments. The ill-disposed environment affects the monitoring infrastructure that includes the sensor nodes and the links. In addition, node failures and environmental hazards cause frequent topology change, communication failure, and network partition. This in turn adds a new dimension to the fragility of the WSN topology. Such perturbations are far more common in WSNs than those found in conventional wireless networks. These perturbations demand efficient techniques for discovering disruptive behavior in WSNs. Traditional fault diagnosis techniques devised for wired interconnected networks, and conventional wireless networks are not directly applicable to WSNs due to its specific requirements and limitations. System-level diagnosis is a technique to identify faults in distributed networks such as multiprocessor systems, wired interconnected networks, and conventional wireless networks. Recently, this has been applied on ad hoc networks and WSNs. This is performed by deduction, based on information in the form of results of tests applied to the sensor nodes. Neighbor coordination-based system-level diagnosis is a variation of this method, which exploits the spatio-temporal correlation between sensor measurements. In this thesis, we present a new approach to diagnose faulty sensor nodes in a WSN, which works in conjunction with the underlying clustering protocol and exploits spatio-temporal correlation between sensor measurements. An advantage of this method is that the diagnostic operation constitutes real work performed by the system, rather than a specialized diagnostic task. In this way, the normal operation of the network can be used for the diagnosis and resulting less time and message overhead. In this thesis, we have devised and evaluated fault diagnosis algorithms for WSNs considering persistence of the faults (transient, intermittent, and permanent), faults in communication channels and in one of the approaches, we attempt to solve the issue of node mobility in diagnosis. A cluster based distributed fault diagnosis (CDFD) algorithm is proposed where the diagnostic local view is obtained by exploiting the spatially correlated sensor measurements. We derived an optimal threshold for effective fault diagnosis in sparse networks. The message complexity of CDFD is O(n) and the number of bits exchanged to diagnose the network are O(n log2 n). The intermittent fault diagnosis is formulated as a multiobjective optimization problem based on the inter-test interval and number of test repetitions required to diagnose the intermittent faults. The two objectives such as detection latency and energy overhead are taken into consideration with a constraint of detection errors. A high level (> 95%) of detection accuracy is achieved while keeping the false alarm rate low (< 1%) for sparse networks. The proposed cluster based distributed intermittent fault diagnosis (CDIFD) algorithm is energy efficient because in CDIFD, diagnostic messages are sent as the output of the routine tasks of the WSNs. A count and threshold-based mechanism is used to discriminate the persistence of faults. The main characteristics of these faults are the amounts of time the fault disappears. We adopt this state-holding time to discriminate transient from intermittent or permanent faults. The proposed cluster based distributed fault diagnosis and discrimination (CDFDD) algorithm is energy efficient due to the improved network lifetime which is greater than 1150 data-gathering rounds with transient fault rates as high as 20%. A mobility aware hierarchal architecture is proposed which is to detect hard and soft faults in dynamic WSN topology assuming random movements of nodes in the WSN. A test pattern that ensures error checking of each functional block of a sensor node is employed to diagnose the network. The proposed mobility aware cluster based distributed fault diagnosis (MCDFD) algorithm assures a better packet delivery ratio (> 80%) in highly dynamic networks with a fault rate as high as 30%. The network lifetime is more than 900 data-gathering rounds in a highly dynamic network with a fault rate as high as 20%

An adaptive envelope analysis in a wireless sensor network for bearing fault diagnosis using fast kurtogram algorithm

This paper proposes a scheme to improve the performance of applying envelope analysis in a wireless sensor network for bearing fault diagnosis. The fast kurtogram is realized on the host computer for determining an optimum band-pass filter for the envelope analysis that is implemented on the wireless sensor node to extract the low frequency fault information. Therefore, the vibration signal can be monitored over the bandwidth limited wireless sensor network with both intelligence and real-time performance. Test results have proved that the diagnostic information for different bearing faults can be successfully extracted using the optimum band-pass filter

Damage identification in structural health monitoring: a brief review from its implementation to the Use of data-driven applications

The damage identification process provides relevant information about the current state of a structure under inspection, and it can be approached from two different points of view. The first approach uses data-driven algorithms, which are usually associated with the collection of data using sensors. Data are subsequently processed and analyzed. The second approach uses models to analyze information about the structure. In the latter case, the overall performance of the approach is associated with the accuracy of the model and the information that is used to define it. Although both approaches are widely used, data-driven algorithms are preferred in most cases because they afford the ability to analyze data acquired from sensors and to provide a real-time solution for decision making; however, these approaches involve high-performance processors due to the high computational cost. As a contribution to the researchers working with data-driven algorithms and applications, this work presents a brief review of data-driven algorithms for damage identification in structural health-monitoring applications. This review covers damage detection, localization, classification, extension, and prognosis, as well as the development of smart structures. The literature is systematically reviewed according to the natural steps of a structural health-monitoring system. This review also includes information on the types of sensors used as well as on the development of data-driven algorithms for damage identification.Peer ReviewedPostprint (published version

Mobile sink based fault diagnosis scheme for wireless sensor networks

Network diagnosis in Wireless Sensor Networks (WSNs) is a difficult task due to their improvisational nature, invisibility of internal running status, and particularly since the network structure can frequently change due to link failure. To solve this problem, we propose a Mobile Sink (MS) based distributed fault diagnosis algorithm for WSNs. An MS, or mobile fault detector is usually a mobile robot or vehicle equipped with a wireless transceiver that performs the task of a mobile base station while also diagnosing the hardware and software status of deployed network sensors. Our MS mobile fault detector moves through the network area polling each static sensor node to diagnose the hardware and software status of nearby sensor nodes using only single hop communication. Therefore, the fault detection accuracy and functionality of the network is significantly increased. In order to maintain an excellent Quality of Service (QoS), we employ an optimal fault diagnosis tour planning algorithm. In addition to saving energy and time, the tour planning algorithm excludes faulty sensor nodes from the next diagnosis tour. We demonstrate the effectiveness of the proposed algorithms through simulation and real life experimental results

Dependable reconfigurable multi-sensor poles for security

Wireless sensor network poles for security monitoring under harsh environments require a very high dependability as they are safety-critical [1]. An example of a multi-sensor pole is shown. Crucial attribute in these systems for security, especially in harsh environment, is a high robustness and guaranteed availability during lifetime. This environment could include molest. In this paper, two approaches are used which are applied simultaneously but are developed in different projects. \u