Where Am I? SLAM for Mobile Machines on a Smart Working Site

The current optimization approaches of construction machinery are mainly based on internal sensors. However, the decision of a reasonable strategy is not only determined by its intrinsic signals, but also very strongly by environmental information, especially the terrain. Due to the dynamic changing of the construction site and the consequent absence of a high definition map, the Simultaneous Localization and Mapping (SLAM) offering the terrain information for construction machines is still challenging. Current SLAM technologies proposed for mobile machines are strongly dependent on costly or computationally expensive sensors, such as RTK GPS and cameras, so that commercial use is rare. In this study, we proposed an affordable SLAM method to create a multi-layer grid map for the construction site so that the machine can have the environmental information and be optimized accordingly. Concretely, after the machine passes by the grid, we can obtain the local information and record it. Combining with positioning technology, we then create a map of the interesting places of the construction site. As a result of our research gathered from Gazebo, we showed that a suitable layout is the combination of one IMU and two differential GPS antennas using the unscented Kalman filter, which keeps the average distance error lower than 2m and the mapping error lower than 1.3% in the harsh environment. As an outlook, our SLAM technology provides the cornerstone to activate many efficiency improvement approaches. View Full-Tex

Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris

Kajian ini dilakukan untuk mengenal pasti tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi Mara Sri Gading terhadap Bahasa Inggeris. Kajian yang dijalankan ini berbentuk deskriptif atau lebih dikenali sebagai kaedah tinjauan. Seramai 325 orang pelajar Diploma in Construction Technology dari Kolej Kemahiran Tinggi Mara di daerah Batu Pahat telah dipilih sebagai sampel dalam kajian ini. Data yang diperoleh melalui instrument soal selidik telah dianalisis untuk mendapatkan pengukuran min, sisihan piawai, dan Pekali Korelasi Pearson untuk melihat hubungan hasil dapatan data. Manakala, frekuensi dan peratusan digunakan bagi mengukur penguasaan pelajar. Hasil dapatan kajian menunjukkan bahawa tahap penguasaan Bahasa Inggeris pelajar adalah berada pada tahap sederhana manakala faktor utama yang mempengaruhi penguasaan Bahasa Inggeris tersebut adalah minat diikuti oleh sikap. Hasil dapatan menggunakan pekali Korelasi Pearson juga menunjukkan bahawa terdapat hubungan yang signifikan antara sikap dengan penguasaan Bahasa Inggeris dan antara minat dengan penguasaan Bahasa Inggeris. Kajian menunjukkan bahawa semakin positif sikap dan minat pelajar terhadap pengajaran dan pembelajaran Bahasa Inggeris semakin tinggi pencapaian mereka. Hasil daripada kajian ini diharapkan dapat membantu pelajar dalam meningkatkan penguasaan Bahasa Inggeris dengan memupuk sikap positif dalam diri serta meningkatkan minat mereka terhadap Bahasa Inggeris dengan lebih baik. Oleh itu, diharap kajian ini dapat memberi panduan kepada pihak-pihak yang terlibat dalam membuat kajian yang akan datang

Conceptual spatial representations for indoor mobile robots

We present an approach for creating conceptual representations of human-made indoor environments using mobile robots. The concepts refer to spatial and functional properties of typical indoor environments. Following findings in cognitive psychology, our model is composed of layers representing maps at different levels of abstraction. The complete system is integrated in a mobile robot endowed with laser and vision sensors for place and object recognition. The system also incorporates a linguistic framework that actively supports the map acquisition process, and which is used for situated dialogue. Finally, we discuss the capabilities of the integrated system

The Revisiting Problem in Simultaneous Localization and Mapping: A Survey on Visual Loop Closure Detection

Where am I? This is one of the most critical questions that any intelligent system should answer to decide whether it navigates to a previously visited area. This problem has long been acknowledged for its challenging nature in simultaneous localization and mapping (SLAM), wherein the robot needs to correctly associate the incoming sensory data to the database allowing consistent map generation. The significant advances in computer vision achieved over the last 20 years, the increased computational power, and the growing demand for long-term exploration contributed to efficiently performing such a complex task with inexpensive perception sensors. In this article, visual loop closure detection, which formulates a solution based solely on appearance input data, is surveyed. We start by briefly introducing place recognition and SLAM concepts in robotics. Then, we describe a loop closure detection system's structure, covering an extensive collection of topics, including the feature extraction, the environment representation, the decision-making step, and the evaluation process. We conclude by discussing open and new research challenges, particularly concerning the robustness in dynamic environments, the computational complexity, and scalability in long-term operations. The article aims to serve as a tutorial and a position paper for newcomers to visual loop closure detection.Comment: 25 pages, 15 figure

Mobile Robot Localization Using Bar Codes as Artificial Landmarks

"Where am I' is the central question in mobile robot navigation. Robust and reliable localization are of vital importance for an autonomous mobile robot because the ability to constantly monitor its position in an unpredictable, unstructured, and dynamic environment is the essential prerequisite to build up and/or maintain environmental maps consistently and to perform path planning. Thus, selflocalization as precondition for goal-oriented behavior is a fundamental property an autonomous mobile robot needs to be equipped with. Accurate, flexible and low-cost localization are important issues for achieving autonomous and cooperative motions of mobile robots. Mobile robots usually perform self-localization by combining position estimates obtained from odometry or inertial navigation with external sensor data. The objective of the thesis is to present a pragmatic idea which utilizes a camera-based bar code recognition technique in order to support mobile robot localization In indoor environments. The idea is to further improve already existing localization capabilities, obtained from dead-reckoning, by furnishing relevant environmental spots such as doors, stairs, etc. with semantic information. In order to facilitate the detection of these landmarks the employment of bar codes is proposed. The important contribution of the thesis is the designing of two software programs. The first program is the bar code generation program which is able to generate five types of bar code labels that play a major role in the proposed localization method. The second program is the bar code recognition program that analyzes image files looking for a bar code label. If a label is found the program recognizes it and display both the information it contains and its coding type. Results concerning the generation of five types of bar code labels which are code 2 of 5, code 3 of9 , codabar code, code 128 and code 2 of 5 interleaved and the detection and identification of these labels from image files are obtained. In conclusion the thesis proposes a solution to mobile robot self-localization problem, which is the central significant for implementing an autonomous mobile robot, by utilizing a camera-based bar code recognition technique to support the basic localization capabilities obtained from a dead-reckoning method in an indoor environment

Improvement of Geometric Quality Inspection and Process Efficiency in Additive Manufacturing

Additive manufacturing (AM) has been known for its ability of producing complex geometries in flexible production environments. In recent decades, it has attracted increasing attention and interest of different industrial sectors. However, there are still some technical challenges hindering the wide application of AM. One major barrier is the limited dimensional accuracy of AM produced parts, especially for industrial sectors such as aerospace and biomedical engineering, where high geometric accuracy is required. Nevertheless, traditional quality inspection techniques might not perform well due to the complexity and flexibility of AM fabricated parts. Another issue, which is brought up from the growing demand for large-scale 3D printing in these industry sectors, is the limited fabrication speed of AM processes. However, how to improve the fabrication efficiency without sacrificing the geometric quality is still a challenging problem that has not been well addressed. In this work, new geometric inspection methods are proposed for both offline and online inspection paradigms, and a layer-by-layer toolpath optimization model is proposed to further improve the fabrication efficiency of AM processes without degrading the resolution. First, a novel Location-Orientation-Shape (LOS) distribution derived from 3D scanning output is proposed to improve the offline inspection in detecting and distinguishing positional and dimensional non-conformities of features. Second, the online geometric inspection is improved by a multi-resolution alignment and inspection framework based on wavelet decomposition and design of experiments (DOE). The new framework is able to improve the alignment accuracy and to distinguish different sources of error based on the shape deviation of each layer. In addition, a quickest change point detection method is used to identify the layer where the earliest change of systematic deviation distribution occurs during the printing process. Third, to further improve the printing efficiency without sacrificing the quality of each layer, a toolpath allocation and scheduling optimization model is proposed based on a concurrent AM process that allows multiple extruders to work collaboratively on the same layer. For each perspective of improvements, numerical studies are provided to emphasize the theoretical and practical meanings of proposed methodologies

A Review of Verbal and Non-Verbal Human-Robot Interactive Communication

In this paper, an overview of human-robot interactive communication is presented, covering verbal as well as non-verbal aspects of human-robot interaction. Following a historical introduction, and motivation towards fluid human-robot communication, ten desiderata are proposed, which provide an organizational axis both of recent as well as of future research on human-robot communication. Then, the ten desiderata are examined in detail, culminating to a unifying discussion, and a forward-looking conclusion