Master of Science

thesisComputing and data acquisition have become an integral part of everyday life. From reading emails on cell phones to kids playing with motion sensing game consoles, we are surrounded with sensors and mobile computing devices. As the availability of powerful computing devices increases, applications in previously limited environments become possible. Training devices in rehabilitation are becoming increasingly common and more mobile. Community based rehabilitative devices are emerging that embrace these mobile advances. To further the flexibility of devices used in rehabilitation, research has explored the use of smartphones as a means to process data and provide feedback to the user. In combination with sensor embedded insoles, smartphones provide a powerful tool for the clinician in gathering data and as a standalone training tool in rehabilitation. This thesis presents the continuing research of sensor based insoles, feedback systems and increasing the capabilities of the Adaptive Real-Time Instrumentation System for Tread Imbalance Correction, or ARTISTIC, with the introduction of ARTISTIC 2.0. To increase the capabilities of the ARTISTIC an Inertial Measurement Unit (IMU) was added, which gave the system the ability to quantify the motion of the gait cycle and, more specifically, determine stride length. The number of sensors in the insole was increased from two to ten, as well as placing the microprocessor and a vibratory motor in the insole. The transmission box weight was reduced by over 50 percent and the volume by over 60 percent. Stride length was validated against a motion capture system and found the average stride length to be within 2.7 ± 6.9 percent. To continue the improvement of the ARTISTIC 2.0, future work will include implementing real-time stride length feedback

Issues in the Development of Location Privacy Theory

Issues in the development of location privacy theory are identified and organized based on both technological considerations and more general privacy theories. Three broad categories containing six issues are described: location (including sensing methods and location properties), privacy (including definition and subject identification), and information flows (from location information acquisition through storage, use, and sharing). An influence diagram model is presented which relates these issues in context and may serve as a basis for further theory development, empirical research, and public policy discussion

Design and Testing of a Multi-Sensor Pedestrian Location and Navigation Platform

Navigation and location technologies are continually advancing, allowing ever higher accuracies and operation under ever more challenging conditions. The development of such technologies requires the rapid evaluation of a large number of sensors and related utilization strategies. The integration of Global Navigation Satellite Systems (GNSSs) such as the Global Positioning System (GPS) with accelerometers, gyros, barometers, magnetometers and other sensors is allowing for novel applications, but is hindered by the difficulties to test and compare integrated solutions using multiple sensor sets. In order to achieve compatibility and flexibility in terms of multiple sensors, an advanced adaptable platform is required. This paper describes the design and testing of the NavCube, a multi-sensor navigation, location and timing platform. The system provides a research tool for pedestrian navigation, location and body motion analysis in an unobtrusive form factor that enables in situ data collections with minimal gait and posture impact. Testing and examples of applications of the NavCube are provided

Continuous Human Activity Tracking over a Large Area with Multiple Kinect Sensors

In recent years, researchers had been inquisitive about the use of technology to enhance the healthcare and wellness of patients with dementia. Dementia symptoms are associated with the decline in thinking skills and memory severe enough to reduce a person’s ability to pay attention and perform daily activities. Progression of dementia can be assessed by monitoring the daily activities of the patients. This thesis encompasses continuous localization and behavioral analysis of patient’s motion pattern over a wide area indoor living space using multiple calibrated Kinect sensors connected over the network. The skeleton data from all the sensor is transferred to the host computer via TCP sockets into Unity software where it is integrated into a single world coordinate system using calibration technique. Multiple cameras are placed with some overlap in the field of view for the successful calibration of the cameras and continuous tracking of the patients. Localization and behavioral data are stored in a CSV file for further analysis

Heading drift mitigation for low-cost inertial pedestrian navigation

The concept of autonomous pedestrian navigation is often adopted for indoor pedestrian navigation. For outdoors, a Global Positioning System (GPS) is often used for navigation by utilizing GPS signals for position computation but indoors, its signals are often unavailable. Therefore, autonomous pedestrian navigation for indoors can be realized with the use of independent sensors, such as low-cost inertial sensors, and these sensors are often known as Inertial Measurement Unit (IMU) where they do not rely on the reception of external information such as GPS signals. Using these sensors, a relative positioning concept from initialized position and attitude is used for navigation. The sensors sense the change in velocity and after integration, it is added to the previous position to obtain the current position. Such low-cost systems, however, are prone to errors that can result in a large position drift. This problem can be minimized by mounting the sensors on the pedestrian’s foot. During walking, the foot is briefly stationary while it is on the ground, sometimes called the zero-velocity period. If a non-zero velocity is then measured by the inertial sensors during this period, it is considered as an error and thus can be corrected. These repeated corrections to the inertial sensor’s velocity measurements can, therefore, be used to control the error growth and minimize the position drift. Nonetheless, it is still inadequate, mainly due to the remaining errors on the inertial sensor’s heading when the velocity corrections are used alone. Apart from the initialization issue, therefore, the heading drift problem still remains in such low-cost systems. In this research, two novel methods are developed and investigated to mitigate the heading drift problem when used with the velocity updates. The first method is termed Cardinal Heading Aided Inertial Navigation (CHAIN), where an algorithm is developed to use building ‘heading’ to aid the heading measurement in the Kalman Filter. The second method is termed the Rotated IMU (RIMU), where the foot-mounted inertial sensor is rotated about a single axis to increase the observability of the sensor’s heading. For the CHAIN, the method proposed has been investigated with real field trials using the low-cost Microstrain 3DM-GX3-25 inertial sensor. It shows a clear improvement in mitigating the heading drift error. It offers significant improvement in navigation accuracy for a long period, allowing autonomous pedestrian navigation for as long as 40 minutes with below 5 meters position error between start and end position. It does not require any extra heading sensors, such as a magnetometer or visual sensors such as a camera nor an extensive position or map database, and thus offers a cost-effective solution. Furthermore, its simplicity makes it feasible for it to be implemented in real-time, as very little computing capability is needed. For the RIMU, the method was tested with Nottingham Geospatial Institute (NGI) inertial data simulation software. Field trials were also undertaken using the same low-cost inertial sensor, mounted on a rotated platform prototype. This method improves the observability of the inertial sensor’s errors, resulting also in a decrease in the heading drift error at the expense of requiring extra components

Real-Time Context-Aware Computing with Applications in Civil Infrastructure Systems.

This dissertation contributes a structured understanding of the fundamental processes involved in developing context-aware computing applications for the civil infrastructure industry. The civil infrastructure industry is characterized by mobile human and machine agents actively engaged in real-time decision-making tasks in a dynamic and unstructured workspace environment. This distinguishes context-aware computing from other computing technologies in three aspects: 1) it has the ability to perceive, interpret, and adapt to the agent’s evolving workspace; 2) It streamlines project data and presents the agent with information pertinent to its context, thus eliminating the agent’s tasks to accomplish the same; 3) By leveraging contextual information, it supplements decision-making tasks in real-time. This research has successfully investigated technical approaches to address fundamental aspects of introducing context-aware applications to civil engineering, including: the ubiquitous localization of mobile agents in dynamic, unstructured environments; abstraction of the spatial-context and identifying the objects of interest to the agent; and the suitability of using standard models to manage and organize data for context-aware computing applications. A computational framework for designing context-aware applications to support real-time decision-making has also been implemented. The framework allows researchers and other end users to leverage currently available context-sensing technology to design and implement innovative solutions to domain specific problems. The researched methods have been validated through several experiments conducted at the University of Michigan, the National Institute of Standards and Technology, and the Michigan Department of Transportation. These experiments have resulted in the implementation of several applications – to support real-life decision-making tasks – that not only serve to illustrate the usefulness of the framework, but also have significant social and economic implications. Among these applications are the controlled drilling system that warns drilling personnel when the drill bit tip is about to strike rebar or utility lines, thus helping preserve the structural integrity of concrete decks and preventing utility strike accidents; an automated fault detection system that diagnoses faulty components of an underperforming HVAC distribution network; and an innovative bridge inspection solution that supports condition assessment decision-making, thus introducing objectivity to visual condition assessment by providing concurrence with the Structural Health Monitoring data.PhDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/99816/1/akulaman_1.pd

Heading drift mitigation for low-cost inertial pedestrian navigation

The concept of autonomous pedestrian navigation is often adopted for indoor pedestrian navigation. For outdoors, a Global Positioning System (GPS) is often used for navigation by utilizing GPS signals for position computation but indoors, its signals are often unavailable. Therefore, autonomous pedestrian navigation for indoors can be realized with the use of independent sensors, such as low-cost inertial sensors, and these sensors are often known as Inertial Measurement Unit (IMU) where they do not rely on the reception of external information such as GPS signals. Using these sensors, a relative positioning concept from initialized position and attitude is used for navigation. The sensors sense the change in velocity and after integration, it is added to the previous position to obtain the current position. Such low-cost systems, however, are prone to errors that can result in a large position drift. This problem can be minimized by mounting the sensors on the pedestrian’s foot. During walking, the foot is briefly stationary while it is on the ground, sometimes called the zero-velocity period. If a non-zero velocity is then measured by the inertial sensors during this period, it is considered as an error and thus can be corrected. These repeated corrections to the inertial sensor’s velocity measurements can, therefore, be used to control the error growth and minimize the position drift. Nonetheless, it is still inadequate, mainly due to the remaining errors on the inertial sensor’s heading when the velocity corrections are used alone. Apart from the initialization issue, therefore, the heading drift problem still remains in such low-cost systems. In this research, two novel methods are developed and investigated to mitigate the heading drift problem when used with the velocity updates. The first method is termed Cardinal Heading Aided Inertial Navigation (CHAIN), where an algorithm is developed to use building ‘heading’ to aid the heading measurement in the Kalman Filter. The second method is termed the Rotated IMU (RIMU), where the foot-mounted inertial sensor is rotated about a single axis to increase the observability of the sensor’s heading. For the CHAIN, the method proposed has been investigated with real field trials using the low-cost Microstrain 3DM-GX3-25 inertial sensor. It shows a clear improvement in mitigating the heading drift error. It offers significant improvement in navigation accuracy for a long period, allowing autonomous pedestrian navigation for as long as 40 minutes with below 5 meters position error between start and end position. It does not require any extra heading sensors, such as a magnetometer or visual sensors such as a camera nor an extensive position or map database, and thus offers a cost-effective solution. Furthermore, its simplicity makes it feasible for it to be implemented in real-time, as very little computing capability is needed. For the RIMU, the method was tested with Nottingham Geospatial Institute (NGI) inertial data simulation software. Field trials were also undertaken using the same low-cost inertial sensor, mounted on a rotated platform prototype. This method improves the observability of the inertial sensor’s errors, resulting also in a decrease in the heading drift error at the expense of requiring extra components