144 research outputs found
Humanoid robot walking control on inclined planes
The humanoid bipedal structure is suitable for a assitive robot functioning in the human environment. However, the bipedal walk is a difficult control problem. Walking just on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the feet is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. The average value of the body pitch angle is used as the inputs to the fuzzy logic system. A foot pitch orientation compensator implemented independently for the two feet complements the fuzyy controller. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the control method presented is successful in enabling the robot to climb slopes of 8.5 degrees (15 percent grade)
Biped robot walking control on inclined planes with fuzzy parameter adaptation
The bipedal structure is suitable for a robot functioning in the human environment, and assuming assistive roles. However, the bipedal walk is a poses a difficult control problem. Walking on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the upper body is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. A newly defined measure of the oscillatory behavior of the body pitch angle and the average value of the pelvis pitch angle are used as inputs to the fuzzy adaptation system. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the fuzzy adaptation algorithms presented are successful in enabling the robot to climb slopes of 5.6 degrees (10 percent)
Walking trajectory control for a biped robot
A not trivial problem in bipedal robot walking is the instability produced by
the violent transition between the different dynamic walk phases. In this work
an dynamic algorithm to control a biped robot is proposed. The algorithm is
based on cubic polynomial interpolation of the initial conditions for the
robot’s position, velocity and acceleration. This guarantee a constant
velocity an a smooth transition in the control trajectories. The algorithm was
successfully probed in the bipedal robot “Dany walker” designed at the Freie
Universität Berlin, finally a briefly mechanical description of the robot
structure is presented
Generation and control of locomotion patterns for biped robots by using central pattern generators
This paper presents an efficient closed-loop locomotion control system for biped robots that operates in the joint space. The robot’s joints are directly driven through control signals generated by a central pattern generator (CPG) network. A genetic algorithm is applied in order to find out an optimal combination of internal parameters of the CPG given a desired walking speed in straight line. Feedback signals generated by the robot’s inertial and force sensors are directly fed into the CPG in order to automatically adjust the locomotion pattern over uneven terrain and to deal with external perturbations in real time. Omnidirectional motion is achieved by controlling the pelvis motion. The performance of the proposed control system has been assessed through simulation experiments on a NAO humanoid robot
Bipedal humanoid robot control by fuzzy adjustment of the reference walking plane
The two-legged humanoid structure has advantages for an assistive robot in the human living and working environment. A bipedal humanoid robot can avoid typical obstacles at homes and offices, reach consoles and appliances designed for human use and can be carried in human transport vehicles. Also, it is speculated that the absorption of robots in the human shape into the human society can be easier than that of other artificial forms. However, the control of bipedal walk is a challenge. Walking performance on solely even floor is not satisfactory. The complications of obtaining a balanced walk are dramatically more pronounced on uneven surfaces like inclined planes, which are quite commonly encountered in human surroundings. The difficulties lie in a variety of tasks ranging from sensor and data fusion to the design of adaptation systems which respond to changing surface conditions. This thesis presents a study on bipedal walk on inclined planes with changing slopes. A Zero Moment Point (ZMP) based gait synthesis technique is employed. The pitch angle reference for the foot sole plane −as expressed in a coordinate frame attached at the robot body − is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. Average ankle pitch torques and the average value of the body pitch angle, computed over a history of a predetermined number of sampling instants, are used as the inputs to this system. The proposed control method is tested via walking experiments with the 29 degreesof- freedom (DOF) human-sized full-body humanoid robot SURALP (Sabanci University Robotics Research Laboratory Platform). Experiments are performed on even floor and inclined planes with different slopes. The results indicate that the approach presented is successful in enabling the robot to stably enter, ascend and leave inclined planes with 15 percent (8.5 degrees) grade. The thesis starts with a terminology section on bipedal walking and introduces a number of successful humanoid robot projects. A survey of control techniques for the walk on uneven surfaces is presented. The design and construction of the experimental robotic platform SURALP is discussed with the mechanical, electronic, walking reference generation and control aspects. The fuzzy reference adjustment system proposed for the walk on inclined planes is detailed and experimental results are presented
Desenvolvimento de comportamentos para robô humanoide
Mestrado em Engenharia de Computadores e TelemáticaHumanoid robotics is an area of active research. Robots with human body
are better suited to execute tasks in environments designed for humans.
Moreover, people feel more comfortable interacting with robots that have
a human appearance. RoboCup encourages robotic research by promoting
robotic competitions. One of these competitions is the Standard Platform
League (SPL) in which humanoid robots play soccer. The robot used is
the Nao robot, created by Aldebaran Robotics. The di erence between
the teams that compete in this league is the software that controls the robots.
Another league promoted by RoboCup is the 3D Soccer Simulation
League (3DSSL). In this league the soccer game is played in a computer
simulation. The robot model used is also the one of the Nao robot. However,
there are a few di erences in the dimensions and it has one more
Degree of Freedom (DoF) than the real robot. Moreover, the simulator
cannot reproduce reality with precision. Both these leagues are relevant
for this thesis, since they use the same robot model. The objective of this
thesis is to develop behaviors for these leagues, taking advantage of the
previous work developed for the 3DSSL. These behaviors include the basic
movements needed to play soccer, namely: walking, kicking the ball, and
getting up after a fall. This thesis presents the architecture of the agent
developed for the SPL, which is similar to the architecture of the FC Portugal
team agent from the 3DSSL, hence allowing to port code between both
leagues easily. It was also developed an interface that allows to control a
leg in a more intuitive way. It calculates the joint angles of the leg, using
the following parameters: three angles between the torso and the line connecting
hip and ankle; two angles between the foot and the perpendicular
of the torso; and the distance between the hip and the ankle. It was also
developed an algorithm to calculate the three joint angles of the hip that
produce the desired vertical rotation, since the Nao robot does not have a
vertical joint in the hip. This thesis presents also the behaviors developed
for the SPL, some of them based on the existing behaviors from the 3DSSL.
It is presented a behavior that allows to create robot movements by de ning
a sequence of poses, an open-loop omnidirectional walking algorithm, and
a walk optimized in the simulator adapted to the real robot. Feedback was
added to this last walk to make it more robust against external disturbances.
Using the behaviors presented in this thesis, the robot achieved a forward
velocity of 16 cm/s, a lateral velocity of 6 cm/s, and rotated at 40 deg/s.
The work developed in this thesis allows to have an agent to control the
Nao robot and execute the basic low level behaviors for competing in the
SPL. Moreover, the similarities between the architecture of the agent for
the SPL with that of the agent from the 3DSSL allow to use the same high
level behaviors in both leagues.A robótica humanoide é uma área em ativo desenvolvimento. Os robôs com
forma humana estão melhor adaptados para executarem tarefas em ambientes
desenhados para humanos. Além disso, as pessoas sentem-se mais
confortáveis quando interagem com robôs que tenham aparência humana.
O RoboCup incentiva a investigação na área da robótica através da realização de competições de robótica. Uma destas competições é a Standard
Platform League (SPL) na qual robôs humanoides jogam futebol. O robô
usado é o robô Nao, criado pela Aldebaran Robotics. A diferença entre as
equipas que competem nesta liga está no software que controla os robôs.
Outra liga presente no RoboCup é a 3D Soccer Simulation League (3DSSL).
Nesta liga o jogo de futebol é jogado numa simulação por computador. O
modelo de robô usado é também o do robô Nao. Contudo, existem umas
pequenas diferenças nas dimensões e este tem mais um grau de liberdade do
que o robô real. O simulador também não consegue reproduzir a realidade
com perfeição. Ambas estas ligas são importantes para esta dissertação,
pois usam o mesmo modelo de robô. O objectivo desta dissertação é desenvolver
comportamentos para estas ligas, aproveitando o trabalho prévio
desenvolvido para a 3DSSL. Estes comportamentos incluem os movimentos
básicos necessários para jogar futebol, nomeadamente: andar, chutar a bola
e levantar-se depois de uma queda. Esta dissertação apresenta a arquitetura
do agente desenvolvida para a SPL, que é similar á arquitetura do agente
da equipa FC Portugal da 3DSSL, para permitir uma mais fácil partilha de
código entre as ligas. Foi também desenvolvida uma interface que permite
controlar uma perna de maneira mais intuitiva. Ela calcula os ângulos das
juntas da perna, usando os seguintes parâmetros: três ângulos entre o torso
e a linha que une anca ao tornozelo; dois ângulos entre o pé e a perpendicular
do torso; e a distância entre a anca e o tornozelo. Nesta dissertação foi
também desenvolvido um algoritmo para calcular os três ângulos das juntas
da anca que produzam a desejada rotação vertical, visto o robô Nao não
ter uma junta na anca que rode verticalmente. Esta dissertação também
apresenta os comportamentos desenvolvidos para a SPL, alguns dos quais
foram baseados nos comportamentos já existentes na 3DSSL. É apresentado
um modelo de comportamento que permite criar movimentos para o robô
de nindo uma sequência de poses, um algoritmo para um andar open-loop e
omnidirecional e um andar otimizado no simulador e adaptado para o robô
real. A este último andar foi adicionado um sistema de feedback para o
tornar mais robusto. Usando os comportamentos apresentados nesta dissertação, o robô atingiu uma velocidade de 16 cm/s para frente, 6 cm/s para
o lado e rodou sobre si pr oprio a 40 graus/s. O trabalho desenvolvido nesta
dissertação permite ter um agente que controle o robô Nao e execute os
comportamentos básicos de baixo nível para competir na SPL. Além disso,
as semelhan cas entre a arquitetura do agente para a SPL com a arquitetura
do agente da 3DSSL permite usar os mesmos comportamentos de alto nível
em ambas as ligas
- …