A housekeeping prognostic health management framework for microfluidic systems

Micro-Electro-Mechanical Systems (MEMS) and Microfluidics are becoming popular solutions for sensing, diagnostics and control applications. Reliability and validation of function is of increasing importance in the majority of these applications. On-line testing strategies for these devices have the potential to provide real-time condition monitoring information. It is shown that this information can be used to diagnose and prognose the health of the device. This information can also be used to provide an early failure warning system by predicting the remaining useful life. Diagnostic and prognostic outcomes can also be leveraged to improve the reliability, dependability and availability of these devices. This work has delivered a methodology for a “lightweight” prognostics solution for a microfluidic device based on real-time diagnostics. An oscillation based test methodology is used to extract diagnostic information that is processed using a Linear Discriminant Analysis based classifier. This enables the identification of current health based on pre-defined health levels. As the deteriorating device is periodically classified, the rate at which the device degrades is used to predict the devices remaining useful life

NASA Tech Briefs, April 2005

Gas-Tolerant Device Senses Electrical Conductivity of Liquid Nanoactuators Based on Electrostatic Forces on Dielectrics Replaceable Microfluidic Cartridges for a PCR Biosensor CdZnTe Image Detectors for Hard-X-Ray Telescopes High-Aperture-Efficiency Horn Antenna Full-Circle Resolver-to-Linear-Analog Converter Continuous, Full-Circle Arctangent Circuit Advanced Three-Dimensional Display System Automatic Focus Adjustment of a Microscope Topics covered include: FastScript3D - A Companion to Java 3D; Generating Mosaics of Astronomical Images; Simulating Descent and Landing of a Spacecraft; Simulating Vibrations in a Complex Loaded Structure; Rover Sequencing and Visualization Program; Software Template for Instruction in Mathematics; Support for User Interfaces for Distributed Systems; Nanostructured MnO2-Based Cathodes for Li-Ion/Polymer Cells; Multi-Layer Laminated Thin Films for Inflatable Structures; Two-Step Laser Ranging for Precise Tracking of a Spacecraft; Growing Aligned Carbon Nanotubes for Interconnections in ICs; Multilayer Composite Pressure Vessels; Texturing Blood-Glucose-Monitoring Optics Using Oxygen Beams; Fault-Tolerant Heat Exchanger; Atomic Clock Based on Opto-Electronic Oscillator; Microfocus/Polycapillary-Optic Crystallographic X-Ray Sys; Depth-Penetrating Luminescence Thermography of Thermal- Barrier Coatings; One-Dimensional Photonic Crystal Superprisms; Measuring Low-Order Aberrations in a Segmented Telescope; Mapping From an Instrumented Glove to a Robot Hand; Application of the Hilbert-Huang Transform to Financial Data; Optimizing Parameters for Deep-Space Optical Communication; and Low-Shear Microencapsulation and Electrostatic Coating

NASA Tech Briefs, August 2011

Topics covered include: Miniature, Variable-Speed Control Moment Gyroscope; NBL Pistol Grip Tool for Underwater Training of Astronauts; HEXPANDO Expanding Head for Fastener-Retention Hexagonal Wrench; Diagonal-Axes Stage for Pointing an Optical Communications Transceiver; Improvements in Speed and Functionality of a 670-GHz Imaging Radar; IONAC-Lite; Large Ka-Band Slot Array for Digital Beam-Forming Applications; Development of a 150-GHz MMIC Module Prototype for Large-Scale CMB Radiation; Coupling Between Waveguide-Fed Slot Arrays; PCB-Based Break-Out Box; Multiple-Beam Detection of Fast Transient Radio Sources; Router Agent Technology for Policy-Based Network Management; Remote Asynchronous Message Service Gateway; Automatic Tie Pointer for In-Situ Pointing Correction; Jitter Correction; MSLICE Sequencing; EOS MLS Level 2 Data Processing Software Version 3; DspaceOgre 3D Graphics Visualization Tool; Metallization for Yb14MnSb11-Based Thermoelectric Materials; Solvent/Non-Solvent Sintering To Make Microsphere Scaffolds; Enhanced Fuel-Optimal Trajectory-Generation Algorithm for Planetary Pinpoint Landing; Self-Cleaning Coatings and Materials for Decontaminating Field-Deployable Land and Water-Based Optical Systems; Separation of Single-Walled Carbon Nanotubes with DEP-FFF; Li Anode Technology for Improved Performance; Post-Fragmentation Whole Genome Amplification-Based Method; Microwave Tissue Soldering for Immediate Wound Closure; Principles, Techniques, and Applications of Tissue Microfluidics; Robotic Scaffolds for Tissue Engineering and Organ Growth; Stress-Driven Selection of Novel Phenotypes; Method for Accurately Calibrating a Spectrometer Using Broadband Light; Catalytic Microtube Rocket Igniter; Stage Cylindrical Immersive Display; Vacuum Camera Cooler; Atomic Oxygen Fluence Monitor; Thermal Management Tools for Propulsion System Trade Studies and Analysis; Introduction to Physical Intelligence; Technique for Solving Electrically Small to Large Structures for Broadband Applications; Accelerated Adaptive MGS Phase Retrieval; Large Eddy Simulation Study for Fluid Disintegration and Mixing; Tropospheric Correction for InSAR Using Interpolated ECMWF Data and GPS Zenith Total Delay; Technique for Calculating Solution Derivatives With Respect to Geometry Parameters in a CFD Code; Acute Radiation Risk and BRYNTRN Organ Dose Projection Graphical User Interface; Probabilistic Path Planning of Montgolfier Balloons in Strong, Uncertain Wind Fields; Flight Simulation of ARES in the Mars Environment; Low-Outgassing Photogrammetry Targets for Use in Outer Space; Planning the FUSE Mission Using the SOVA Algorithm; Monitoring Spacecraft Telemetry Via Optical or RF Link; and Robust Thermal Control of Propulsion Lines for Space Missions

Towards In-situ Based Printed Sensor Systems for Real-Time Soil-Root Nutrient Monitoring and Prediction with Polynomial Regression

This dissertation explores how to increase sensor density in the agricultural framework using low-cost sensors, while also managing major bottlenecks preventing their full commercial adoption for agriculture, accuracy and drift. It also investigated whether low-cost biodegradable printed sensor sheets can result in improved stability, accuracy or drift for use in precision agriculture. In this dissertation, multiple electrode systems were investigated with much of the work focused on printed carbon graphene electrodes (with and without nanoparticles). The sensors were used in two configurations: 1) in varying soil to understand sensor degradation and the effect of environment on sensors, and 2) in plant pod systems to understand growth. It was established that 3) the sensor drift can be controlled and predicted 2) the fabricated low-cost sensors work as well as commercial sensors, and 3) these sensors were then successfully validated in the pod platform. A standardized testing system was developed to investigate soil physicochemical effects on the modified nutrient sensors through a series of controlled experiments. The construct was theoretically modeled and the sensor data was matched to the models. Supervised machine learning algorithms were used to predict sensor responses. Further models produced actionable insight which allowed us to identify a) the minimal amounts of irrigation required and b) optimal time after applying irrigation or rainfall event before achieving accurate sensor readings, both with respect to sensor depth placement within the soil matrix. The pore-scale behavior of solute transport through different depths within the sandy soil matrix was further simulated using COMSOL Multi-physics. This work leads to promising disposable printed systems for precision agriculture

NASA Tech Briefs, December 2009

Topics include: A Deep Space Network Portable Radio Science Receiver; Detecting Phase Boundaries in Hard-Sphere Suspensions; Low-Complexity Lossless and Near-Lossless Data Compression Technique for Multispectral Imagery; Very-Long-Distance Remote Hearing and Vibrometry; Using GPS to Detect Imminent Tsunamis; Stream Flow Prediction by Remote Sensing and Genetic Programming; Pilotless Frame Synchronization Using LDPC Code Constraints; Radiometer on a Chip; Measuring Luminescence Lifetime With Help of a DSP; Modulation Based on Probability Density Functions; Ku Telemetry Modulator for Suborbital Vehicles; Photonic Links for High-Performance Arraying of Antennas; Reconfigurable, Bi-Directional Flexfet Level Shifter for Low-Power, Rad-Hard Integration; Hardware-Efficient Monitoring of I/O Signals; Video System for Viewing From a Remote or Windowless Cockpit; Spacesuit Data Display and Management System; IEEE 1394 Hub With Fault Containment; Compact, Miniature MMIC Receiver Modules for an MMIC Array Spectrograph; Waveguide Transition for Submillimeter-Wave MMICs; Magnetic-Field-Tunable Superconducting Rectifier; Bonded Invar Clip Removal Using Foil Heaters; Fabricating Radial Groove Gratings Using Projection Photolithography; Gratings Fabricated on Flat Surfaces and Reproduced on Non-Flat Substrates; Method for Measuring the Volume-Scattering Function of Water; Method of Heating a Foam-Based Catalyst Bed; Small Deflection Energy Analyzer for Energy and Angular Distributions; Polymeric Bladder for Storing Liquid Oxygen; Pyrotechnic Simulator/Stray-Voltage Detector; Inventions Utilizing Microfluidics and Colloidal Particles; RuO2 Thermometer for Ultra-Low Temperatures; Ultra-Compact, High-Resolution LADAR System for 3D Imaging; Dual-Channel Multi-Purpose Telescope; Objective Lens Optimized for Wavefront Delivery, Pupil Imaging, and Pupil Ghosting; CMOS Camera Array With Onboard Memory; Quickly Approximating the Distance Between Two Objects; Processing Images of Craters for Spacecraft Navigation; Adaptive Morphological Feature-Based Object Classifier for a Color Imaging System; Rover Slip Validation and Prediction Algorithm; Safety and Quality Training Simulator; Supply-Chain Optimization Template; Algorithm for Computing Particle/Surface Interactions; Cryogenic Pupil Alignment Test Architecture for Aberrated Pupil Images; and Thermal Transport Model for Heat Sink Design

Optimisation of microfluidic experiments for model calibration of a synthetic promoter in S. cerevisiae

This thesis explores, implements, and examines the methods to improve the efficiency of model calibration experiments for synthetic biological circuits in three aspects: experimental technique, optimal experimental design (OED), and automatic experiment abnormality screening (AEAS). Moreover, to obtain a specific benchmark that provides clear-cut evidence of the utility, an integrated synthetic orthogonal promoter in yeast (S. cerevisiae) and a corresponded model is selected as the experiment object. This work first focuses on the “wet-lab” part of the experiment. It verifies the theoretical benefit of adopting microfluidic technique by carrying out a series of in-vivo experiments on a developed automatic microfluidic experimental platform. Statistical analysis shows that compared to the models calibrated with flow-cytometry data (a representative traditional experimental technique), the models based on microfluidic data of the same experiment time give significantly more accurate behaviour predictions of never-encountered stimuli patterns. In other words, compare to flow-cytometry experiments, microfluidics can obtain models of the required prediction accuracy within less experiment time. The next aspect is to optimise the “dry-lab” part, i.e., the design of experiments and data processing. Previous works have proven that the informativeness of experiments can be improved by optimising the input design (OID). However, the amount of work and the time cost of the current OID approach rise dramatically with large and complex synthetic networks and mathematical models. To address this problem, this thesis introduces the parameter clustering analysis and visualisation (PCAV) to speed up the OID by narrowing down the parameters of interest. For the first time, this thesis proposes a parameter clustering algorithm based on the Fisher information matrix (FIMPC). Practices with in-silico experiments on the benchmarking promoter show that PCAV reduces the complexity of OID and provides a new way to explore the connections between parameters. Moreover, the analysis shows that experiments with FIMPC-based OID lead to significantly more accurate parameter estimations than the current OID approach. Automatic abnormality screening is the third aspect. For microfluidic experiments, the current identification of invalid microfluidic experiments is carried out by visual checks of the microscope images by experts after the experiments. To improve the automation level and robustness of this quality control process, this work develops an automatic experiment abnormality screening (AEAS) system supported by convolutional neural networks (CNNs). The system learns the features of six abnormal experiment conditions from images taken in actual microfluidic experiments and achieves identification within seconds in the application. The training and validation of six representative CNNs of different network depths and design strategies show that some shallow CNNs can already diagnose abnormal conditions with the desired accuracy. Moreover, to improve the training convergence of deep CNNs with small data sets, this thesis proposes a levelled-training method and improves the chance of convergence from 30% to 90%. With a benchmark of a synthetic promoter model in yeast, this thesis optimises model calibration experiments in three aspects to achieve a more efficient procedure: experimental technique, optimal experimental design (OED), and automatic experiment abnormality screening (AEAS). In this study, the efficiency of model calibration experiments for the benchmarking model can be improved by: adopting microfluidics technology, applying CAVP parameter analysis and FIMPC-based OID, and setting up an AEAS system supported by CNN. These contributions have the potential to be exploited for designing more efficient in-vivo experiments for model calibration in similar studies