4,746 research outputs found
Distributed data cache designs for clustered VLIW processors
Wire delays are a major concern for current and forthcoming processors. One approach to deal with this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the L1 data cache typically remains centralized in What we call partially distributed architectures. However, as technology evolves, the relative latency of such a centralized cache will increase, leading to an important impact on performance. In this paper, we propose partitioning the L1 data cache among clusters for clustered VLIW processors. We refer to this kind of design as fully distributed processors. In particular; we propose and evaluate three different configurations: a snoop-based cache coherence scheme, a word-interleaved cache, and flexible LO-buffers managed by the compiler. For each alternative, instruction scheduling techniques targeted to cyclic code are developed. Results for the Mediabench suite'show that the performance of such fully distributed architectures is always better than the performance of a partially distributed one with the same amount of resources. In addition, the key aspects of each fully distributed configuration are explored.Peer ReviewedPostprint (published version
Recommended from our members
A performance comparison of several superscalar processsor [sic] models with a VLIW processor
Superscalar and VLIW processors can both execute multiple instructions each cycle. Each employs a different instruction scheduling method to achieve multiple instruction execution. Superscalar processors schedule instructions dynamically, and VLIW processors execute statically scheduled instructions. This paper quantitatively compares various superscalar processor architectures with a Very Long Instruction Word architecture developed at the University of California, Irvine. An architectural overview and performance analysis of the superscalar processor models and VIPER, a VLIW processor designed to take advantage of the parallelizing capabilities of Percolation Scheduling, are presented. The motivation for this comparison is to study the capability of a dynamically scheduled processor to obtain the same performance achieved by a statically scheduled processor, and examine the hardware resources required by each
Recommended from our members
Fault tolerance in super-scalar and VLIW processors
In this paper, we present a method for utilizing the spare capacity in super-scalar and very long instruction word (VLIW) processors to tolerate functional unit failures. Unlike previous work that was primarily interested in detection of transient faults, we are concerned with more permanent and/or intermittent faults which necessitate processor reconfiguration. Our method utilizes the VLIW compiler or the superscalar scheduler to insert redundant operations whenever idle functional units exist. The results of these redundant operations are used to detect and diagnose functional unit failures. For super-scalar processors, the scheduler can then utilize this information to ensure that operations are performed only on non-faulty units. In VLIW processors, this is equivalent to recompiling the code to run on the remaining non-faulty functional units. Since in certain applications, recompilation may not be possible, we consider two alternative reconfiguration strategies for VLIW processors. These strategies sacrifice storage space and execution time, respectively, in order to reconfigure without recompiling. We present Markov models that describe the behavior of processors using these different approaches and we evaluate their reliabilities. The results show that, while super-scalar and VLIW with recompilation provide the highest reliability, all proposed strategies significantly increase reliability over that of an unprotected processor
Variable-based multi-module data caches for clustered VLIW processors
Memory structures consume an important fraction of the total processor energy. One solution to reduce the energy consumed by cache memories consists of reducing their supply voltage and/or increase their threshold voltage at an expense in access time. We propose to divide the L1 data cache into two cache modules for a clustered VLIW processor consisting of two clusters. Such division is done on a variable basis so that the address of a datum determines its location. Each cache module is assigned to a cluster and can be set up as a fast power-hungry module or as a slow power-aware module. We also present compiler techniques in order to distribute variables between the two cache modules and generate code accordingly. We have explored several cache configurations using the Mediabench suite and we have observed that the best distributed cache organization outperforms traditional cache organizations by 19%-31% in energy-delay and by 11%-29% in energy-delay. In addition, we also explore a reconfigurable distributed cache, where the cache can be reconfigured on a context switch. This reconfigurable scheme further outperforms the best previous distributed organization by 3%-4%.Peer ReviewedPostprint (published version
Hierarchical clustered register file organization for VLIW processors
Technology projections indicate that wire delays will become one of the biggest constraints in future microprocessor designs. To avoid long wire delays and therefore long cycle times, processor cores must be partitioned into components so that most of the communication is done locally. In this paper, we propose a novel register file organization for VLIW cores that combines clustering with a hierarchical register file organization. Functional units are organized in clusters, each one with a local first level register file. The local register files are connected to a global second level register file, which provides access to memory. All intercluster communications are done through the second level register file. This paper also proposes MIRS-HC, a novel modulo scheduling technique that simultaneously performs instruction scheduling, cluster selection, inserts communication operations, performs register allocation and spill insertion for the proposed organization. The results show that although more cycles are required to execute applications, the execution time is reduced due to a shorter cycle time. In addition, the combination of clustering and hierarchy provides a larger design exploration space that trades-off performance and technology requirements.Peer ReviewedPostprint (published version
The effectiveness of loop unrolling for modulo scheduling in clustered VLIW architectures
Clustered organizations are becoming a common trend in the design of VLIW architectures. In this work we propose a novel modulo scheduling approach for such architectures. The proposed technique performs the cluster assignment and the instruction scheduling in a single pass, which is shown to be more effective than doing first the assignment and later the scheduling. We also show that loop unrolling significantly enhances the performance of the proposed scheduler especially when the communication channel among clusters is the main performance bottleneck. By selectively unrolling some loops, we can obtain the best performance with the minimum increase in code size. Performance evaluation for the SPECfp95 shows that the clustered architecture achieves about the same IPC (Instructions Per Cycle) as a unified architecture with the same resources. Moreover when the cycle time is taken into account, a 4-cluster configurations is 3.6 times faster than the unified architecture.Peer ReviewedPostprint (published version
Coarse-grained reconfigurable array architectures
Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code
- …