Wideband mobile propagation channels: Modelling measurements and characterisation for microcellular environments

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Modelling of radio wave propagation using Finite Element Analysis.

Fourth generation (4G) wireless communication systems are intended to support high data rates which requires careful and accurate modelling of the radio environment. In this thesis, for the first time finite clement based accurate and computationally efficient models of wave propagation in different outdoor and indoor environments has been developed. Three different environments were considered: the troposphere, vegetation and tunnels and wave propagation in these environments were modelled using finite element analysis. Use of finite elements in wave propagation modelling is a novel idea although many propagation models and approaches were used in past. Coverage diagrams, path loss contours and power levels were calculated using developed models in the troposphere, vegetation and tunnels. Results obtained were compared with commercially available software Advanced Refractive Effects Prediction Software (AREPS) to validate the accuracy of the developed approach and it is shown that results were accurate with an accuracy of 3dB. The developed models were very flexible in handling complex geometries and similar analysis can be easily extended to other environments. A fully vectored finite element base propagation model was developed for straight and curved tunnels. An optimum range of values of different electrical parameters for tunnels of different shapes has been derived. The thesis delivered a novel approach to modelling radio channels that provided a fast and accurate solution of radio wave propagation in realistic environments. The results of this thesis will have a great impact in modelling and characterisation of future wireless communication systems

Modelling and characterisation of antennas and propagation for body-centric wireless communication

PhDBody-Centric Wireless Communication (BCWC) is a central point in the development of fourth generation mobile communications. The continuous miniaturisation of sensors, in addition to the advancement in wearable electronics, embedded software, digital signal processing and biomedical technologies, have led to a new concept of usercentric networks, where devices can be carried in the user’s pockets, attached to the user’s body or even implanted. Body-centric wireless networks take their place within the personal area networks, body area networks and body sensor networks which are all emerging technologies that have a broad range of applications such as healthcare and personal entertainment. The major difference between BCWC and conventional wireless systems is the radio channel over which the communication takes place. The human body is a hostile environment from radio propagation perspective and it is therefore important to understand and characterise the effect of the human body on the antenna elements, the radio channel parameters and hence the system performance. This is presented and highlighted in the thesis through a combination of experimental and electromagnetic numerical investigations, with a particular emphasis to the numerical analysis based on the finite-difference time-domain technique. The presented research work encapsulates the characteristics of the narrowband (2.4 GHz) and ultra wide-band (3-10 GHz) on-body radio channels with respect to different digital phantoms, body postures, and antenna types hence highlighting the effect of subject-specific modelling, static and dynamic environments and antenna performance on the overall body-centric network. The investigations covered extend further to include in-body communications where the radio channel for telemetry with medical implants is also analysed by considering the effect of different digital phantoms on the radio channel characteristics. The study supports the significance of developing powerful and reliable numerical modelling to be used in conjunction with measurement campaigns for a comprehensive understanding of the radio channel in body-centric wireless communication. It also emphasises the importance of considering subject-specific electromagnetic modelling to provide a reliable prediction of the network performance

Radio channel characterisation and system-level modelling for ultra wideband body-centric wireless communications

PhDThe next generation of wireless communication is evolving towards user-centric networks, where constant and reliable connectivity and services are essential. Bodycentric wireless network (BCWN) is the most exciting and emerging 4G technology for short (1-5 m) and very short (below 1 m) range communication systems. It has got numerous applications including healthcare, entertainment, surveillance, emergency, sports and military. The major difference between the BCWN and conventional wireless systems is the radio channel over which the communication takes place. The human body is a hostile medium from the radio propagation perspective and it is therefore important to understand and characterise the effect of the human body on the antenna elements, the radio propagation channel parameters and hence the system performance. In addition, fading is another concern that affects the reliability and quality of the wireless link, which needs to be taken into account for a low cost and reliable wireless communication system for body-centric networks. The complex nature of the BCWN requires operating wireless devices to provide low power requirements, less complexity, low cost and compactness in size. Apart from these characteristics, scalable data rates and robust performance in most fading conditions and jamming environment, even at low signal to noise ratio (SNR) is needed. Ultra-wideband (UWB) technology is one of the most promising candidate for BCWN as it tends to fulfill most of these requirements. The thesis focuses on the characterisation of ultra wideband body-centric radio propagation channel using single and multiple antenna techniques. Apart from channel characterisation, system level modelling of potential UWB radio transceivers for body-centric wireless network is also proposed. Channel models with respect to large scale and delay analysis are derived from measured parameters. Results and analyses highlight the consequences of static and dynamic environments in addition to the antenna positions on the performance of body-centric wireless communication channels. Extensive measurement i campaigns are performed to analyse the significance of antenna diversity to combat the channel fading in body-centric wireless networks. Various diversity combining techniques are considered in this process. Measurement data are also used to predict the performance of potential UWB systems in the body-centric wireless networks. The study supports the significance of single and multiple antenna channel characterisation and modelling in producing suitable wireless systems for ultra low power body-centric wireless networks.University of Engineering and Technology Lahore Pakista

Human Body Scattering Effects at Millimeter Waves Frequencies for Future 5G Systems and Beyond

[ES] Se espera que las futuras comunicaciones móviles experimenten una revolución técnica que vaya más allá de las velocidades de datos de Gbps y reduzca las latencias de las velocidades de datos a niveles muy cercanos al milisegundo. Se han investigado nuevas tecnologías habilitadoras para lograr estas exigentes especificaciones. Y la utilización de las bandas de ondas milimétricas, donde hay mucho espectro disponible, es una de ellas. Debido a las numerosas dificultades técnicas asociadas a la utilización de esta banda de frecuencias, se necesitan complicados modelos de canal para anticipar las características del canal de radio y evaluar con precisión el rendimiento de los sistemas celulares en milimétricas. En concreto, los modelos de propagación más precisos son los basados en técnicas de trazado de rayos deterministas. Pero estas técnicas tienen el estigma de ser computacionalmente exigentes, y esto dificulta su uso para caracterizar el canal de radio en escenarios interiores complejos y dinámicos. La complejidad de la caracterización de estos escenarios depende en gran medida de la interacción del cuerpo humano con el entorno radioeléctrico, que en las ondas milimétricas suele ser destructiva y muy impredecible. Por otro lado, en los últimos años, la industria de los videojuegos ha desarrollado potentes herramientas para entornos hiperrealistas, donde la mayor parte de los avances en esta emulación de la realidad tienen que ver con el manejo de la luz. Así, los motores gráficos de estas plataformas se han vuelto cada vez más eficientes para manejar grandes volúmenes de información, por lo que son ideales para emular el comportamiento de la propagación de las ondas de radio, así como para reconstruir un escenario interior complejo. Por ello, en esta Tesis se ha aprovechado la capacidad computacional de este tipo de herramientas para evaluar el canal radioeléctrico milimétricas de la forma más eficiente posible. Esta Tesis ofrece unas pautas para optimizar la propagación de la señal en milimétricas en un entorno interior dinámico y complejo, para lo cual se proponen tres objetivos principales. El primer objetivo es evaluar los efectos de dispersión del cuerpo humano cuando interactúa con el canal de propagación. Una vez evaluado, se propuso un modelo matemático y geométrico simplificado para calcular este efecto de forma fiable y rápida. Otro objetivo fue el diseño de un reflector pasivo modular en milimétricas, que optimiza la cobertura en entornos de interior, evitando la interferencia del ser humano en la propagación. Y, por último, se diseñó un sistema de apuntamiento del haz predictivo en tiempo real, para que opere con el sistema de radiación en milimétricas, cuyo objetivo es evitar las pérdidas de propagación causadas por el cuerpo humano en entornos interiores dinámicos y complejos.[CA] S'espera que les futures comunicacions mòbils experimenten una revolució tècnica que vaja més enllà de les velocitats de dades de Gbps i reduïsca les latències de les velocitats de dades a nivells molt pròxims al milisegundo. S'han investigat noves tecnologies habilitadoras per a aconseguir estes exigents especificacions. I la utilització de les bandes d'ones millimètriques, on hi ha molt espectre disponible, és una d'elles. A causa de les nombroses dificultats tècniques associades a la utilització d'esta banda de freqüències, es necessiten complicats models de canal per a anticipar les característiques del canal de ràdio i avaluar amb precisió el rendiment dels sistemes cellulars en millimètriques. En concret, els models de propagació més precisos són els basats en tècniques de traçat de rajos deterministes. Però estes tècniques tenen l'estigma de ser computacionalment exigents, i açò dificulta el seu ús per a caracteritzar el canal de ràdio en escenaris interiors complexos i dinàmics. La complexitat de la caracterització d'estos escenaris depén en gran manera de la interacció del cos humà amb l'entorn radioelèctric, que en les ones millimètriques sol ser destructiva i molt impredicible. D'altra banda, en els últims anys, la indústria dels videojocs ha desenrotllat potents ferramentes per a entorns hiperrealistes, on la major part dels avanços en esta emulació de la realitat tenen a veure amb el maneig de la llum. Així, els motors gràfics d'estes plataformes s'han tornat cada vegada més eficients per a manejar grans volums d'informació, per la qual cosa són ideals per a emular el comportament de la propagació de les ones de ràdio, així com per a reconstruir un escenari interior complex. Per això, en esta Tesi s'ha aprofitat la capacitat computacional d'este tipus de ferramentes per a avaluar el canal radioelèctric millimètriques de la manera més eficient possible. Esta Tesi oferix unes pautes per a optimitzar la propagació del senyal en millimètriques en un entorn interior dinàmic i complex, per a la qual cosa es proposen tres objectius principals. El primer objectiu és avaluar els efectes de dispersió del cos humà quan interactua amb el canal de propagació. Una vegada avaluat, es va proposar un model matemàtic i geomètric simplificat per a calcular este efecte de forma fiable i ràpida. Un altre objectiu va ser el disseny d'un reflector passiu modular en millimètriques, que optimitza la cobertura en entorns d'interior, evitant la interferència del ser humà en la propagació, per a així evitar pèrdues de propagació addicionals. I, finalment, es va dissenyar un sistema d'apuntament del feix predictiu en temps real, perquè opere amb el sistema de radiació en millimètriques, l'objectiu del qual és evitar les pèrdues de propagació causades pel cos humà en entorns interiors dinàmics i complexos.[EN] Future mobile communications are expected to experience a technical revolution that goes beyond Gbps data rates and reduces data rate latencies to levels very close to a millisecond. New enabling technologies have been researched to achieve these demanding specifications. The utilization of mmWave bands, where a lot of spectrum is available, is one of them. Due to the numerous technical difficulties associated with using this frequency band, complicated channel models are necessary to anticipate the radio channel characteristics and to accurately evaluate the performance of cellular systems in mmWave. In particular, the most accurate propagation models are those based on deterministic ray tracing techniques. But these techniques have the stigma of being computationally intensive, and this makes it difficult to use them to characterize the radio channel in complex and dynamic indoor scenarios. The complexity of characterizing these scenarios depends largely on the interaction of the human body with the radio environment, which at mmWaves is often destructive and highly unpredictable. On the other hand, in recent years, the video game industry has developed powerful tools for hyper-realistic environments, where most of the progress in this reality emulation has to do with the handling of light. Therefore, the graphic engines of these platforms have become more and more efficient to handle large volumes of information, becoming ideal to emulate the radio wave propagation behavior, as well as to reconstruct a complex interior scenario. Therefore, in this Thesis one has taken advantage of the computational capacity of this type of tools to evaluate the mmWave radio channel in the most efficient way possible. This Thesis offers some guidelines to optimize the signal propagation in mmWaves in a dynamic and complex indoor environment, for which three main objectives are proposed. The first objective has been to evaluate the scattering effects of the human body when it interacts with the propagation channel. Once evaluated, a simplified mathematical and geometrical model has been proposed to calculate this effect in a reliable and fast way. Another objective has been the design of a modular passive reflector in mmWaves, which optimizes the coverage in indoor environments, avoiding human interference in the propagation, in order to avoid its harmful scattering effects. And finally, a real-time predictive beam steering system has been designed for the mmWaves radiation system, in order to avoid propagation losses caused by the human body in dynamic and complex indoor environments.Romero Peña, JS. (2022). Human Body Scattering Effects at Millimeter Waves Frequencies for Future 5G Systems and Beyond [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19132

Reflection measurement of building materials at microwaves

Abstract. Radio waves interact differently with different materials. The knowledge of reflection and transmission characteristics of the electromagnetic waves through and from the building walls is the key in designing a radio propagation model. The dielectric properties of the material determine the behavior of reflection and transmission of the electromagnetic waves. Therefore, an oblique reflection model is implemented in this thesis to estimate the dielectric properties of various walls at frequency range of 0.7–7 GHz (6.3 GHz bandwidth). The measurement setup consists of a four-port vector network analyzer, two wideband dual-polarized cross-shaped Vivaldi antennas and two 8 m long coaxial cables. Measurements for parallel and perpendicular polarizations are achieved simultaneously by using the dual-polarized antennas. Time-domain gating is applied to separate the desired reflection and eliminate all other multiple reflections from the environment and to suppress the Line-of-Sight component from the delayed response. The estimation of dielectric property of a material is an optimization problem where a suitable objective function is minimized to get the appropriate value. A theoretical model is implemented, so that the minimum difference between the theoretical and measured absolute value of reflection coefficient gives an estimated value of complex relative permittivity. The non-linear least squares algorithm is used for optimization purpose. The real and imaginary part of complex relative permittivity is investigated in this thesis. The real part signifies the amount of electric energy stored in a material, and is called dielectric constant whereas the imaginary part is called the loss factor, which signifies the dissipation of the radiated energy. The estimated values are in good agreement with the values found in the literature. The estimated dielectric properties in this study, such as dielectric constant, loss tangent and Brewster angle of the various materials can be utilized further in designing radio propagation models for similar environments

Modeling EMI Resulting from a Signal Via Transition Through Power/Ground Layers

Signal transitioning through layers on vias are very common in multi-layer printed circuit board (PCB) design. For a signal via transitioning through the internal power and ground planes, the return current must switch from one reference plane to another reference plane. The discontinuity of the return current at the via excites the power and ground planes, and results in noise on the power bus that can lead to signal integrity, as well as EMI problems. Numerical methods, such as the finite-difference time-domain (FDTD), Moment of Methods (MoM), and partial element equivalent circuit (PEEC) method, were employed herein to study this problem. The modeled results are supported by measurements. In addition, a common EMI mitigation approach of adding a decoupling capacitor was investigated with the FDTD method