Single-Laser Multi-Terabit/s Systems

Optical communication systems carry the bulk of all data traffic worldwide. This book introduces multi-Terabit/s transmission systems and three key technologies for next generation networks. A software-defined multi-format transmitter, an optical comb source and an optical processing scheme for the fast Fourier transform for Tbit/s signals. Three world records demonstrate the potential: The first single laser 10 Tbit/s and 26 Tbit/s OFDM and the first 32.5 Tbit/s Nyquist WDM experiments

Single-Laser Multi-Terabit/s Systems

Optical communication systems carry the bulk of all data traffic worldwide. This book introduces multi-Terabit/s transmission systems and three key technologies for next generation networks. A software-defined multi-format transmitter, an optical comb source and an optical processing scheme for the fast Fourier transform for Tbit/s signals. Three world records demonstrate the potential: The first single laser 10 Tbit/s and 26 Tbit/s OFDM and the first 32.5 Tbit/s Nyquist WDM experiments

Optimization of system’s parameters for wavelength conversion of E-band signals

Current and future wireless communication systems are designed to achieve the user’s demands such as high data rate and high speed with low latency and simultaneously to save bandwidth and spectrum. In 5G and 6G networks, a high speed of transmitting and switching is required for internet of things (IoT) applications with higher capacity. To achieve these requirements a semiconductor optical amplifier (SOA) is considered as a wavelength converter to transmit a signal with an orthogonal frequency division multiplexing with subcarrier power modulation (OFDM-SPM). It exploits the subcarrier’s power in conventional OFDM block in order to send additional bits beside the normally transmitted bits. In this paper, we optimized the SOA’s parameters to have efficient wavelength conversion process. These parameters are included the injection current (IC) of SOA, power of pump and probe signals. A 7 Gbps OFDM-SPM signal with a millimeter waves (MMW) carrier of 80 GHz is considered for signal switching. The simulation results investigated and analyzed the performance of the designed system in terms of error vector magnitude (EVM), bit error rate (BER) and optical signal-to-noise ratio (OSNR). The optimum value of IC is 0.6 A while probe power is 9.45 and 8.9 dBm for pump power. The simulation is executed by virtual photonic integrated (VPI) software

Semiconductor Optical Amplifiers and mm-Wave Wireless Links for Converged Access Networks

Future access networks are converged optical-wireless networks, where fixed-line and wireless services share the same infrastructure. In this book, semiconductor optical amplifiers (SOA) and mm-wave wireless links are investigated, and their use in converged access networks is explored: SOAs compensate losses in the network, and thereby extend the network reach. Millimeter-wave wireless links substitute fiber links when cabling is not economical

Experimental demonstration of digital predistortion for orthogonal frequency-division multiplexing-radio over fibre links near laser resonance

Radio over fibre (RoF), an enabling technology for distribution of wireless broadband service signals through analogue optical links, suffers from non-linear distortion. Digital predistortion has been demonstrated as an effective approach to overcome the RoF non-linearity. However, questions remain as to how the approach performs close to laser resonance, a region of significant dynamic non-linearity, and how resilient the approach is to changes in input signal and link operating conditions. In this work, the performance of a digital predistortion approach is studied for directly modulated orthogonal frequency-division multiplexing RoF links operating from 2.47 to 3.7 GHz. It extends previous works to higher frequencies, and to higher quadrature amplitude modulation (QAM) levels. In addition, the resilience of the predistortion approach to changes in modulation level of QAM schemes, and average power levels are investigated, and a novel predistortion training approach is proposed and demonstrated. Both memoryless and memory polynomial predistorter models, and a simple off-line least-squares-based identification method, are used, with excellent performance improvements demonstrated up to 3.0 GHz

Photonic devices for next generation fiber-to-the-home access network

It would be unaffordable if the WDM-PON technologies were directly applied for massive deployment. Hence, the potential WDM-PON is to be integrated and improved in order to adapt it for NGPON and the future 5G. The UDWDM-PON can be considered as an ultimate solution for the next-generation access network capable of providing unlimited bandwidth for each user, thanks to the coherent detection. Plenty of scientists have believed that it is crucial to increase the operating speed and maximum reach of WDM-PON, while it has no sense if people achieve them without a ordable cost. In order to apply them cost-effciently, the system should require colorless ONUs and bidirectional systems. It is desired that the whole system use modulators on a low bias consumption, even limit the number of amplifiers. However, for bidirectional transmission the backscattering effects would limit the performance if we want to reuse the carrier from OLT. So, we should design a method to separate the wavelength between upstream and downstream. The traditional UDWDM-PON uses 2 laser at ONU, in this thesis, the single-DFB based ONUs are presented with integrated devices. What is the most plausible configuration? The photonic devices such as RSOA, DEML, FML with advanced configurations are presented in this thesis with different applications. The proposed thesis includes these parts: key devices for WDM-PON and the chirp parameters of these integrated photonic devices are measured, the polarization independent RSOA with different applications is also included, demonstration of dual output DEML with bidirectional coherent UDWDM-PON transmission, mitigating residual AM of DEML for phase modulation, and fast tuning for the UDWDM channel via FML are described.Por sus altos requerimientos técnicos, sería inasumible aplicar las tecnologías WDM-PON directamente para el despliegue masivo de Fiber-to-the-Home de nueva generación. Por lo tanto, el potencial se WDM-PON se debe integrar y mejorar con el fin de adaptarlo para NGPON y el futuro 5G. Hoy dia, operadores, usuarios y científicos, ven crucial augmentar la velocitat de funcionament y el alcance de las redes de acceso PON, si bien no tiene sentido conseguirlo con un coste inasequible. El UDWDM-PON puede considerarse como una solución definitiva para la red de acceso de próxima generación, capaz de proporcionar ancho de banda ilimitado para cada usuario, gracias a la detección coherente, por lo que en esta tesis se aborda su realización con un coste e integración prácticos. Con el fin de aplicarlos de manera rentable, el sistema debería exigir a las ONU que sean idénticas, si láseres preseleccionados o incoloros, y ser bidireccionales. Se desea que el conjunto de moduladores del sistema tengan en un bajo consumo, e incluso limitar el número de amplificadores. Sin embargo, para la transmisión bidireccional los efectos de retrodispersión limitarían el rendimiento si queremos volver a utilizar la portadora generada en la OLT. Por lo tanto, debemos diseñar un método para separar la longitud de onda en las transmisiones de bajada y de retorno del usuario a la central. El tradicional UDWDM-PON utiliza 2 láseres en la ONU; en esta tesis, las ONUs usan dispositivos integrados basados en un sólo DFB. ¿Cuál es la configuración más plausible? Los dispositivos fotónicos como RSOA, DEML, FML con configuraciones avanzadas se presentan en esta tesis con diferentes aplicaciones, que resuelven distintos problemas técnicos. La tesis incluye las siguientes partes: análisis y medida de dispositivos fotónicos clave para WDM-PON con modulación de fase, la independencia a la polarización de RSOA con diferentes aplicaciones, demostración de DEML con doble salida para transmisión bidireccional coherente UDWDM-PON, mitigación de AM residual de DEML para la modulación de fase, y la sintonía rápida de canal de UDWDM a través de FML.Postprint (published version