Unambiguous Acquisition and Tracking Technique for General BOC Signals

This article presents a new unambiguous acquisition and tracking technique for general Binary Offset Carrier (BOC) ranging signals, which will be used in modern GPS, European Galileo system and Chinese BeiDou system. The test criterion employed in this technique is based on a synthesized correlation function which completely removes positive side peaks while keeping the sharp main peak. Simulation results indicate that the proposed technique completely removes the ambiguity threat in the acquisition process while maintaining relatively higher acquisition performance for low order BOC signals. The potential false lock points in the tracking phase for any order BOC signals are avoided by using the proposed method. Impacts of thermal noise and multipath on the proposed technique are investigated; the simulation results show that the new method allows the removal of false lock points with slightly degraded tracking performance. In addition, this method is convenient to implement via logic circuits

Low-frequency radio navigation system

A method of continuous wave navigation using four transmitters operating at sufficiently low frequencies to assure essentially pure groundwave operation is described. The transmitters are keyed to transmit constant bursts (1/4 sec) in a time-multiplexed pattern with phase modulation of at least one transmitter for identification of the transmitters and with the ability to identify the absolute phase of the modulated transmitter and the ability to modulate low rate data for transmission. The transmitters are optimally positioned to provide groundwave coverage over a service region of about 50 by 50 km for the frequencies selected in the range of 200 to 500 kHz, but their locations are not critical because of the beneficial effect of overdetermination of position of a receiver made possible by the fourth transmitter. Four frequencies are used, at least two of which are selected to provide optimal resolution. All transmitters are synchronized to an average phase as received by a monitor receiver

Unambiguous Sine-phased BOC(kn,n) Signal Acquisition Based on Combined Correlation Functions

Galileo and GPS have been developing their new signals in recent years. Multiplexed Binary Offset Carrier (MBOC) is the final implementation of Galileo E1 and GPS L1C, which is the multiplexing of BOC(1,1) and BOC(6,1). Therefore, it is helpful to satisfy the demand that the new signals must be compatible with GPS BPSK signal. BOC(kn,n) modulation will provide better track performance and higher positioning accuracy. However, the main drawback of the BOC modulated signal is that its autocorrelation has multiple side peaks around the main peak. This paper will focus on a family of signals: sine-phased BOC(kn,n). We are trying to explore a new method to cancel the side peaks of BOC(kn,n) autocorrelation, making use of two kinds of correlation functions. One is the correlation of the incoming signal and the sine-phased BOC(kn,n) modulated spreading code(PRN code multiplied by subcarrier), and the other is the correlation of the incoming signal and the PRN code only. Two kinds of correlation function are separated into several sub-correlations. Sub-correlations have less side peaks which are in different code delays. Corresponding parts of two sub-correlations will be combined to cancel the side peaks separately, and finally the new function without side peaks will be acquired after several correlations added together. Simulation results will be given. It is shown that the proposed method is contributed to the side peaks cancellation for unambiguous sine-phased BOC (kn, n) signal acquisition

Shuttle S-band communications technical concepts

Using the S-band communications system, shuttle orbiter can communicate directly with the Earth via the Ground Spaceflight Tracking and Data Network (GSTDN) or via the Tracking and Data Relay Satellite System (TDRSS). The S-band frequencies provide the primary links for direct Earth and TDRSS communications during all launch and entry/landing phases of shuttle missions. On orbit, S-band links are used when TDRSS Ku-band is not available, when conditions require orbiter attitudes unfavorable to Ku-band communications, or when the payload bay doors are closed. the S-band communications functional requirements, the orbiter hardware configuration, and the NASA S-band communications network are described. The requirements and implementation concepts which resulted in techniques for shuttle S-band hardware development discussed include: (1) digital voice delta modulation; (2) convolutional coding/Viterbi decoding; (3) critical modulation index for phase modulation using a Costas loop (phase-shift keying) receiver; (4) optimum digital data modulation parameters for continuous-wave frequency modulation; (5) intermodulation effects of subcarrier ranging and time-division multiplexing data channels; (6) radiofrequency coverage; and (7) despreading techniques under poor signal-to-noise conditions. Channel performance is reviewed

A METHOD OF SIDE-PEAK MITIGATION APPLIED TO BINARY OFFSET CARRIER MODULATED GNSS SIGNALS TRACKING APPLIED IN GNSS RECEIVERS

ABSTRACT In this study, a new method of signal tracking technique in Global Navigation Satellite System (GNSS) is proposed. It is based on a combination of the autocorrelation function (ACF) with another cross correlation function in order to eliminate or reduce the power of the side peaks in ACF of Binary Offset Carrier (BOC) modulated signals. These types of modulated signals are adopted by both GNSSs like the modernized Global Positioning System (GPS) and Galileo. Moreover, this method still keep the sharp of main peak of ACF in order to maintain the advantage of BOC(n,n) signals in code tracking and multipath mitigation. In the proposed method, the output of the discriminator in delay tracking loop has no false lock point. The performance of multipath mitigation of the proposed method is better than Narrow Correlator method. The good performance of the proposed scheme in multipath mitigation has been tested using simulation results

GNSS Signals Acquisition and Tracking in Unfavorable Environment

In this paper, we propose a method based on applying specific transformations to the Global Navigation Satellite System (GNSS) signals received in unfavorable environment. As a result, one simple classical receiver including these adjustments becomes sensitive to several Multi-Constellation and Multi-Frequency (MC/MF) GNSS signals and achieves efficiently their collective acquisition. The proposed method consists of three variants each dedicated to a particular type of Binary Offset Carrier (BOC) family signals; the primary is based on undersampling process, the second is founded on time expansion and the last one permits the acquisition of more than five different GNSS signals by a single local Composite Binary Coded Symbols (CBCS) waveform replica. Hence, the proposed scheme, by avoiding the use of multiple demodulators in the baseband, allows less receiver complexity and accordingly better realization cost. The simulation results showed that the proposed method presents an effective solution for the reception of MC/MF signals in unfavorable environments

The Global Navigation System Scope (GNSScope): a toolbox for the end-to-end modelling simulation and analysis of GNSS

The thesis provides a detailed overview of the work carried out by the author over the course of the research for the award of the degree of Doctor of Philosophy at the University of Westminster, and the performance results of the novel techniques introduced into the literature. The outcome of the work is collectively referred to as the Global Navigation System Scope (GNSScope) Toolbox, offering a complete, fully reconfigurable platform for the end-to-end modeling, simulation and analysis of satellite navigation signals and systems, covering the signal acquisition, tracking, and range processing operations that take place in a generic Global Navigation Satellite System (GNSS) receiver, accompanied by a Graphical User Interface (GUI) providing access to all the techniques available in the toolbox. Designed and implemented entirely in the MATLAB mathematical programming environment using Software Defined Radio (SDR) receiver techniques, the toolbox offers a novel new acquisition algorithm capable of handling all Phase-Shift Keying (PSK) type modulations used on all frequency bands in currently available satellite navigation signals, including all sub-classes of the Binary Offset Carrier (BOC) modulated signals. In order to be able to process all these signals identified by the acquisition search, a novel tracking algorithm was also designed and implemented into the toolbox to track and decode all acquired satellite signals, including those currently intended to be used in future navigation systems, such as the Galileo test signals transmitted by the GIOVE satellites orbiting the Earth. In addition to the developed receiver toolbox, three novel algorithms were also designed to handle weak signals, multipath, and multiple access interference in GNSScope. The Mirrored Channel Mitigation Technique, based on the successive and parallel interference cancellation techniques, reduces the hardware complexity of the interference mitigation process by utilizing the local code and carrier replicas generated in the tracking channels, resulting in a reduction in hardware resources proportional to the number of received strong signals. The Trigonometric Interference Cancellation Technique, used in cross-correlation interference mitigation, exploits the underlying mathematical expressions to simplify the interference removal process, resulting in reduced complexity and execution times by reducing the number of operations by 25% per tracking channel. The Split Chip Summation Technique, based on the binary valued signal modulation compression technique, enhances the amount of information captured from compressing the signal to reveal specific filtering effects on the positive and negative polarity chips of the spreading code. Simulation case studies generated entirely using the GNSScope toolbox will be used throughout the thesis to demonstrate the effectiveness of the novel techniques developed over the course of the research, and the results will be compared to those obtained from other techniques reported in the literature

The tone range/telemetry interferometer tracking system for support of sounding rocket payloads

Combined range rate and telemetric interferometer system for radar tracking of scientific sounding rocket

Performance of precise marine positioning using future modernised global satellite positioning systems and a novel partial ambiguity resolution technique

The International Maritime Organisation (IMO) established a set of positioning requirements for future Global Navigation Satellite System (GNSS) constellations in IMO resolution A.915. It is important to be able to determine if these requirements can be met, and what shore infrastructure would be required. This thesis describes the collection of data in a marine environment and the analysis of these data with regards to the requirements. The data collection exercise was held at the beginning of May 2008 and saw THV Alert navigate into Harwich Harbour whilst Global Positioning System (GPS) observation data were recorded from onboard the vessel and from shore-based reference stations. Additional data were obtained from nearby Ordnance Survey reference stations, and two total stations were used to track the vessel’s passage to provide a truth model. Several modernised GPS satellites were tracked. The data were processed under different scenarios, using software developed at UCL, and the positioning performance was analysed in the context of the IMO requirements. Potential performance improvements from modernised GPS and Galileo were then discussed. Providing integrity through single-epoch real-time kinematic positioning, required to meet the strictest IMO requirements, is particularly difficult. The identification of phase observation outliers is not possible before the integer ambiguities are resolved, but an undetected outlier could prevent successful ambiguity resolution. It will not always be necessary to fix all the ambiguities to achieve the required positioning precision, particularly with a multi-GNSS constellation. This thesis introduces a new algorithm for partial ambiguity resolution in the presence of measurement bias. Although computationally intensive, this algorithm significantly improves the ambiguity resolution success rate, increasing the maximum baseline length over which the highest requirements are met with dual-frequency GPS from 1 km to 66 km