A Compact UWB BPF with a Notch Band using Rectangular Resonator Sandwiched between Interdigital Structure

This paper presents a compact design of an ultra wide band bandpass filters with a notch band using interdigital structure. The aim of the design is to reduce the size of filter, reduce the complexity of the design, and improve the performance of filter response. The proposed filter comprises of a rectangular resonator sandwiched between Interdigital structures, with rectangular slot as defected microstrip structure at the input and output ports. This design has been used for the first time to achieve the above aim. The advantage with this design is that, it does not use any via or defected ground structure. The insertion loss of proposed filter, in passband between 3.1 GHz to 10.8 GHz, is less than 0.7dB, and for the notched band it is 21.5 dB centred at 7.9 GHz. The proposed filter is fabricated, tested and compared with simulated results. The proposed design was small in size with less complexity, and shows performance better than the other designs available in the literatures at this dimension

Design, Modelling and Implementation of Several Multi-Standard High Performance Single-Wideband and Multi-Wideband Microwave Planar Filters

The objectives of this work are to review, investigate and model the microwave planar filters of the modern wireless communication system. The recent main stream of microwave filters are classified and discussed separately. Various microwave filters with detailed applications are investigated in terms of their geometrical structures and operational performances. A comprehensive theoretical study of microwave filters is presented. The main types of microwave filters including the basic low-pass filters such as Butterworth and Chebyshev filters are fully analysed and described in detail. The transformation from low-pass prototype filters to high-pass filters, band-pass filters and band-stop filters are illustrated and introduced. Research work on stepped impedance resonator (SIR) and asymmetric stepped impedance resonator (ASIR) structure is presented. The characteristics of λg/4, λg/2 and λg (λg is the guided wavelength of the fundamental frequency in the free space) type SIR resonators, and the characteristic of asymmetric SIR resonator are categorized and investigated. Based on the content mentioned above, novel multi-standard high performance asymmetric stepped impedance resonator single-wideband and dual-wideband filters with wide stopbands are proposed. The methodologies to realize wide passband and wide stop-band filters are detailed. In addition, multi-standard high performance triplewideband, quadruple-wideband and quint-wideband filters are suggested and studied. The measurement results for all prototype filters agree well with the theoretical predictions and simulated results from Ansoft HFSS software. The featured broad bandwidths over single/multiple applicable frequency bands and the high performances of the proposed filters make them very promising for applications in future multistandard wireless communication

Development of planar filters and diplexers for wireless transceiver front ends

The central theme of this work is the design of compact microstrip bandpass filters and diplexers and the investigation of applications of these circuits in integrated transceiver RF front-end. The core of this thesis therefore presents the following stages of the work: - Analysis of coupled pseudo-interdigital resonators and lines; formulation of approximate transmission zero conditions and the investigation of coupling between these two resonators and related structures. - Development of compact, low loss and high selectivity microstrip pseudointerdigital bandpass filters. The design procedure of the filter consists of three simple steps, starting from the design of a parallel-coupled bandpass filter using the image parameter method applied to coupled microstrip lines. The development of compact microstrip diplexers composed of these filters uses the optimized common-transformer diplexing technique. An experimental verification of the developed filters and diplexers is made. - Investigation of the use of stepped impedance resonators (SIR) for the design of pseudo-interdigital bandpass filters with advanced characteristics. The design of compact dual-band filter using SIR. The investigation of possible improvement of the stopband of bandpass filters using bandstop generating structures. The application of SIR, defected ground structures (DGS), spur-lines, and opencircuited stubs in the design of compact bandpass filters with improved stopband. - The application of the proposed filters and diplexers in the design of integrated antenna filters and antenna diplexers. Improvement of performance of patch antennas, such as suppression of spurious harmonics of single-band antenna and improvement of bandwidth and selectivity of dual-band antenna, as a result of integration with filters. Separation of antennas’ bands and reduction of component count in integrated antenna diplexer

Passive Planar Microwave Devices

The aim of this book is to highlight some recent advances in microwave planar devices. The development of planar technologies still generates great interest because of their many applications in fields as diverse as wireless communications, medical instrumentation, remote sensing, etc. In this book, particular interest has been focused on an electronically controllable phase shifter, wireless sensing, a multiband textile antenna, a MIMO antenna in microstrip technology, a miniaturized spoof plasmonic antipodal Vivaldi antenna, a dual-band balanced bandpass filter, glide-symmetric structures, a transparent multiband antenna for vehicle communications, a multilayer bandpass filter with high selectivity, microwave planar cutoff probes, and a wideband transition from microstrip to ridge empty substrate integrated waveguide

Design and analysis of wideband passive microwave devices using planar structures

A selected volume of work consisting of 84 published journal papers is presented to demonstrate the contributions made by the author in the last seven years of his work at the University of Queensland in the area of Microwave Engineering. The over-arching theme in the author’s works included in this volume is the engineering of novel passive microwave devices that are key components in the building of any microwave system. The author’s contribution covers innovative designs, design methods and analyses for the following key devices and associated systems: Wideband antennas and associated systems Band-notched and multiband antennas Directional couplers and associated systems Power dividers and associated systems Microwave filters Phase shifters Much of the motivation for the work arose from the desire to contribute to the engineering o

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

The design and fabrication of miniature microwave bandpass filters using multilayer liquid crystal polymer technology

This thesis presents the design and fabrication techniques for miniature microwave bandpass filters using multilayer liquid crystal polymer (LCP) technology. As a multilayer technology for microwave devices, LCP is of low cost and light weight. It also has excellent electrical properties across a wide frequency range. These characteristics make it promising for the development of next generation microwave devices for applications across commercial, defence and civil sectors. However, very limited work has been found in the open literature to apply this technology to the design of miniature bandpass filters, especially at low microwave frequencies. In addition, the reported work shows lack of fabrication techniques, which limits the size reduction of multilayer LCP devices. To address these problems, this thesis develops advanced fabrication techniques for sophisticated LCP structures, such as multilayer capacitors, via connections and cavities. These techniques are then used to support the design of novel miniature bandpass filters for wideband and narrowband applications. For the design of miniature wideband bandpass filters, a cascaded approach, which combines highpass and lowpass filters, is presented first to provide a flexible design solution. This is followed by another novel ultra-wideband bandpass filter which produces extra transmission zeroes with minimum number of elements. It does not only have high performance but also a compact structure for high yield fabrication. For narrowband applications, two types of advanced coupled-resonator filters are developed. One type produces a very good selectivity at the upper passband edge, and its spurious-free stopband is extremely wide and of high interference attenuation. The other type, based on novel mixed-couplings approaches developed in this thesis, provides a solution to produce almost the same response as the coupling matrix prototype. This type is used to generate arbitrarily-located transmission zeroes. All designs presented in this thesis are simulated using CAD design tools and then validated by measurements of fabricated samples. Good agreements between simulations and measurements are shown in the thesis

Development and Experimental Analysis of Wireless High Accuracy Ultra-Wideband Localization Systems for Indoor Medical Applications

This dissertation addresses several interesting and relevant problems in the field of wireless technologies applied to medical applications and specifically problems related to ultra-wideband high accuracy localization for use in the operating room. This research is cross disciplinary in nature and fundamentally builds upon microwave engineering, software engineering, systems engineering, and biomedical engineering. A good portion of this work has been published in peer reviewed microwave engineering and biomedical engineering conferences and journals. Wireless technologies in medicine are discussed with focus on ultra-wideband positioning in orthopedic surgical navigation. Characterization of the operating room as a medium for ultra-wideband signal transmission helps define system design requirements. A discussion of the first generation positioning system provides a context for understanding the overall system architecture of the second generation ultra-wideband positioning system outlined in this dissertation. A system-level simulation framework provides a method for rapid prototyping of ultra-wideband positioning systems which takes into account all facets of the system (analog, digital, channel, experimental setup). This provides a robust framework for optimizing overall system design in realistic propagation environments. A practical approach is taken to outline the development of the second generation ultra-wideband positioning system which includes an integrated tag design and real-time dynamic tracking of multiple tags. The tag and receiver designs are outlined as well as receiver-side digital signal processing, system-level design support for multi-tag tracking, and potential error sources observed in dynamic experiments including phase center error, clock jitter and drift, and geometric position dilution of precision. An experimental analysis of the multi-tag positioning system provides insight into overall system performance including the main sources of error. A five base station experiment shows the potential of redundant base stations in improving overall dynamic accuracy. Finally, the system performance in low signal-to-noise ratio and non-line-of-sight environments is analyzed by focusing on receiver-side digitally-implemented ranging algorithms including leading-edge detection and peak detection. These technologies are aimed at use in next-generation medical systems with many applications including surgical navigation, wireless telemetry, medical asset tracking, and in vivo wireless sensors

Novel narrowband microstrip filters for wireless communications systems

The novel resonant structures based on microstrip integrated circuit technology have been developed and extensively studied in this research project for filter applications in next generation wireless communication systems. Several novel microstrip bandpass filter structures have been introduced that meet the stringent requirements for high-performance (shaip-cutoff frequency response, low insertion-loss, high return-loss, and high out-of-band isolation), compact size, low cost, and ease of integration in subsystem and systems. The analysis and modelling methods for these resonators includes a transmission-line theory, ABCD matrix, and EM simulation based on method of moments. The measured results are used to validate the performance of the devices developed and show good agreement with the theory and simulation results. The various ‘C-shape’ open-loop ring resonators were developed and fabricated, namely ‘Embedded-Square’ and ‘Embedded-Triangle’ resonators, exhibited a quasielliptic function bandpass filter response free from spurii across an ultra-wide bandwidth. The theoretical analysis on these structures revealed that the transmission zeros (or attenuation poles) disposed at either side of the passband were a function of the length of the open-ends relative to the feed-line. It was also discovered that the input/output feed-lines had to be located asymmetrically relative to each other to yield the desired bandpass response. The ‘C-shape’ resonator is able to produce a very broad 3-dB bandwidth of 1027 MHz, which has a fractional bandwidth of 24.63%. This broad passband is achieved with the resonator with line width of 200 microns. In addition, it has a return-loss of 13.16 dB and insertion-loss of 1.22 dB at centre frequency of 4.17 GHz. The newly designed ‘Embedded-Square’ and ‘Embedded-Triangle’ resonators were fabricated and the measured results showed an excellent suppression of out-ofband spurious responses up to 13.8 GHz and 17.7 GHz, respectively, where the rejection is greater than 10 dB. These new structures not only achieve fractional bandwidth of around 18% and 22% for the ‘Embedded-Square’ resonator and ‘Embedded-Triangle’ resonator, respectively; but also maintain an insertion-loss at maximum of 0.7 dB. These proposed filters exhibit good stopband rejection and the measured results confirm the validity and the usefulness of these proposed filters in many practical applications. Compact dual bandpass filters were also developed using a variant of the openloop resonator and interconnected using an inter-digital capacitor. These microstrip structures have the ability to tune the upper passband without affecting the characteristics of the lower passband response. The tuning range is across a frequency range of 1.51 fo, where fo is centre frequency of the primary passband. The novel filter designs presented in this thesis provide advantage of compact size, low insertion-loss, high selectivity, and high out-of-band isolation across an ultra-bandwidth frequency range

Impedance Transformers

Non