Efficient hardware implementations of low bit depth motion estimation algorithms

In this paper, we present efficient hardware implementation of multiplication free one-bit transform (MF1BT) based and constraint one-bit transform (C-1BT) based motion estimation (ME) algorithms, in order to provide low bit-depth representation based full search block ME hardware for real-time video encoding. We used a source pixel based linear array (SPBLA) hardware architecture for low bit depth ME for the first time in the literature. The proposed SPBLA based implementation results in a genuine data flow scheme which significantly reduces the number of data reads from the current block memory, which in turn reduces the power consumption by at least 50% compared to conventional 1BT based ME hardware architecture presented in the literature. Because of the binary nature of low bit-depth ME algorithms, their hardware architectures are more efficient than existing 8 bits/pixel representation based ME architectures

A high performance hardware architecture for one bit transform based motion estimation

Motion Estimation (ME) is the most computationally intensive part of video compression and video enhancement systems. One bit transform (IBT) based ME algorithms have low computational complexity. Therefore, in this paper, we propose a high performance systolic hardware architecture for IBT based ME. The proposed hardware performs full search ME for 4 Macroblocks in parallel and it is the fastest IBT based ME hardware reported in the literature. In addition, it uses less on-chip memory than the previous IBT based ME hardware by using a novel data reuse scheme and memory organization. The proposed hardware is implemented in Verilog HDL. It consumes %34 of the slices in a Xilinx XC2VP30-7 FPGA. It works at 115 MHz in the same FPGA and is capable of processing 50 1920x1080 full High Definition frames per second. Therefore, it can be used in consumer electronics products that require real-time video processing or compression

A low complexity hardware architecture for motion estimation

This paper tackles the problem of accelerating motion estimation for video processing. A novel architecture using binary data is proposed, which attempts to reduce power consumption. The solution exploits redundant operations in the sum of absolute differences (SAD) calculation, by a mechanism known as early termination. Further data redundancies are exploited by using a run length coding addressing scheme, where access to pixels which do not contribute to the final SAD value is minimised. By using these two techniques operations and memory accesses are reduced by 93.29% and 69.17% respectively relative to a systolic array implementation

Energy-efficient acceleration of MPEG-4 compression tools

We propose novel hardware accelerator architectures for the most computationally demanding algorithms of the MPEG-4 video compression standard-motion estimation, binary motion estimation (for shape coding), and the forward/inverse discrete cosine transforms (incorporating shape adaptive modes). These accelerators have been designed using general low-energy design philosophies at the algorithmic/architectural abstraction levels. The themes of these philosophies are avoiding waste and trading area/performance for power and energy gains. Each core has been synthesised targeting TSMC 0.09 μm TCBN90LP technology, and the experimental results presented in this paper show that the proposed cores improve upon the prior art

Efficient hardware architectures for MPEG-4 core profile

Efficient hardware acceleration architectures are proposed for the most demandingMPEG-4 core profile algorithms, namely; texture motion estimation (TME), binary motion estimation (BME)and the shape adaptive discrete cosine transform (SA-DCT). The proposed ME designs may also be used for H.264, since both architectures can handle variable block sizes. Both ME architectures employ early termination techniques that reduce latency and save needless memory accesses and power consumption. They also use a pixel subsampling technique to facilitate parallelism, while balancing the computational load. The BME datapath also saves operations by using Run Length Coded (RLC) pixel addressing. The SA-DCT module has a re-configuring multiplier-less serial datapath using adders and multiplexers only to improve area and power. The SA-DCT packing steps are done using a minimal switching addressing scheme with guarded evaluation. All three modules have been synthesised targeting the WildCard-II FPGA benchmarking platform adopted by the MPEG-4 Part9 reference hardware group

Hardware acceleration architectures for MPEG-Based mobile video platforms: a brief overview

This paper presents a brief overview of past and current hardware acceleration (HwA) approaches that have been proposed for the most computationally intensive compression tools of the MPEG-4 standard. These approaches are classified based on their historical evolution and architectural approach. An analysis of both evolutionary and functional classifications is carried out in order to speculate on the possible trends of the HwA architectures to be employed in mobile video platforms

3D high definition video coding on a GPU-based heterogeneous system

H.264/MVC is a standard for supporting the sensation of 3D, based on coding from 2 (stereo) to N views. H.264/MVC adopts many coding options inherited from single view H.264/AVC, and thus its complexity is even higher, mainly because the number of processing views is higher. In this manuscript, we aim at an efficient parallelization of the most computationally intensive video encoding module for stereo sequences. In particular, inter prediction and its collaborative execution on a heterogeneous platform. The proposal is based on an efficient dynamic load balancing algorithm and on breaking encoding dependencies. Experimental results demonstrate the proposed algorithm's ability to reduce the encoding time for different stereo high definition sequences. Speed-up values of up to 90× were obtained when compared with the reference encoder on the same platform. Moreover, the proposed algorithm also provides a more energy-efficient approach and hence requires less energy than the sequential reference algorith

Implementation of JPEG compression and motion estimation on FPGA hardware

A hardware implementation of JPEG allows for real-time compression in data intensivve applications, such as high speed scanning, medical imaging and satellite image transmission. Implementation options include dedicated DSP or media processors, FPGA boards, and ASICs. Factors that affect the choice of platform selection involve cost, speed, memory, size, power consumption, and case of reconfiguration. The proposed hardware solution is based on a Very high speed integrated circuit Hardware Description Language (VHDL) implememtation of the codec with prefered realization using an FPGA board due to speed, cost and flexibility factors; The VHDL language is commonly used to model hardware impletations from a top down perspective. The VHDL code may be simulated to correct mistakes and subsequently synthesized into hardware using a synthesis tool, such as the xilinx ise suite. The same VHDL code may be synthesized into a number of sifferent hardware architetcures based on constraints given. For example speed was the major constraint when synthesizing the pipeline of jpeg encoding and decoding, while chip area and power consumption were primary constraints when synthesizing the on-die memory because of large area. Thus, there is a trade off between area and speed in logic synthesis