Multi-port Memory Design for Advanced Computer Architectures

In this thesis, we describe and evaluate novel memory designs for multi-port on-chip and off-chip use in advanced computer architectures. We focus on combining multi-porting and evaluating the performance over a range of design parameters. Multi-porting is essential for caches and shared-data systems, especially multi-core System-on-chips (SOC). It can significantly increase the memory access throughput. We evaluate FinFET voltage-mode multi-port SRAM cells using different metrics including leakage current, static noise margin and read/write performance. Simulation results show that single-ended multi-port FinFET SRAMs with isolated read ports offer improved read stability and flexibility over classical double-ended structures at the expense of write performance. By increasing the size of the access transistors, we show that the single-ended multi-port structures can achieve equivalent write performance to the classical double-ended multi-port structure for 9% area overhead. Moreover, compared with CMOS SRAM, FinFET SRAM has better stability and standby power. We also describe new methods for the design of FinFET current-mode multi-port SRAM cells. Current-mode SRAMs avoid the full-swing of the bitline, reducing dynamic power and access time. However, that comes at the cost of voltage drop, which compromises stability. The design proposed in this thesis utilizes the feature of Independent Gate (IG) mode FinFET, which can leverage threshold voltage by controlling the back gate voltage, to merge two transistors into one through high-Vt and low-Vt transistors. This design not only reduces the voltage drop, but it also reduces the area in multi-port current-mode SRAM design. For off-chip memory, we propose a novel two-port 1-read, 1-write (1R1W) phasechange memory (PCM) cell, which significantly reduces the probability of blocking at the bank levels. Different from the traditional PCM cell, the access transistors are at the top and connected to the bitline. We use Verilog-A to model the behavior of Ge2Sb2Te5 (GST: the storage component). We evaluate the performance of the two-port cell by transistor sizing and voltage pumping. Simulation results show that pMOS transistor is more practical than nMOS transistor as the access device when both area and power are considered. The estimated area overhead is 1.7�, compared to single-port PCM cell. In brief, the contribution we make in this thesis is that we propose and evaluate three different kinds of multi-port memories that are favorable for advanced computer architectures

Aging-Aware Design Methods for Reliable Analog Integrated Circuits using Operating Point-Dependent Degradation

The focus of this thesis is on the development and implementation of aging-aware design methods, which are suitable to satisfy current needs of analog circuit design. Based on the well known \gm/\ID sizing methodology, an innovative tool-assisted aging-aware design approach is proposed, which is able to estimate shifts in circuit characteristics using mostly hand calculation schemes. The developed concept of an operating point-dependent degradation leads to the definition of an aging-aware sensitivity, which is compared to currently available degradation simulation flows and proves to be efficient in the estimation of circuit degradation. Using the aging-aware sensitivity, several analog circuits are investigated and optimized towards higher reliability. Finally, results are presented for numerous target specifications

A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Static noise margin analysis for CMOS logic cells in near-threshold

The advancement of semiconductor technology enabled the fabrication of devices with faster switching activity and chips with higher integration density. However, these advances are facing new impediments related to energy and power dissipation. Besides, the increasing demand for portable devices leads the circuit design paradigm to prioritize energy efficiency instead of performance. Altogether, this scenario motivates engineers towards reducing the supply voltage to the near and subthreshold regime to increase the lifespan of battery-powered devices. Even though operating in these regime offer interesting energy-frequency trade-offs, it brings challenges concerning noise tolerance. As the supply voltage reduces, the available noise margins decrease, and circuits become more prone to functional failures. In addition, near and subthreshold circuits are more susceptible to manufacturing variability, hence further aggravating noise issues. Other issues, such as wire minimization and gate fan-out, also contribute to the relevance of evaluating the noise margin of circuits early in the design Accordingly, this work investigates how to improve the static noise margin of digital synchronous circuits that will operate at the near/subthreshold regime. This investigation produces a set of three original contributions. The first is an automated tool to estimate the static noise margin of CMOS combinational cells. The second contribution is a realistic static noise margin estimation methodology that considers process-voltage-temperature variations. Results show that the proposed methodology allows to reduce up to 70% of the static noise margin pessimism. Finally, the third contribution is the noise-aware cell design methodology and the inclusion of a noise evaluation of complex circuits during the logic synthesis. The resulting library achieved higher static noise margin (up to 24%) and less spread among different cells (up to 62%).Os avanços na tecnologia de semicondutores possibilitou que se fabricasse dispositivos com atividade de chaveamento mais rápida e com maior capacidade de integração de transistores. Estes avanços, todavia, impuseram novos empecilhos relacionados com a dissipação de potência e energia. Além disso, a crescente demanda por dispositivos portáteis levaram à uma mudança no paradigma de projeto de circuitos para que se priorize energia ao invés de desempenho. Este cenário motivou à reduzir a tensão de alimentação com qual os dispositivos operam para um regime próximo ou abaixo da tensão de limiar, com o objetivo de aumentar sua duração de bateria. Apesar desta abordagem balancear características de performance e energia, ela traz novos desafios com relação a tolerância à ruído. Ao reduzirmos a tensão de alimentação, também reduz-se a margem de ruído disponível e, assim, os circuitos tornam-se mais suscetíveis à falhas funcionais. Somado à este efeito, circuitos com tensões de alimentação nestes regimes são mais sensíveis à variações do processo de fabricação, logo agravando problemas com ruído. Existem também outros aspectos, tais como a miniaturização das interconexões e a relação de fan-out de uma célula digital, que incentivam a avaliação de ruído nas fases iniciais do projeto de circuitos integrados Por estes motivos, este trabalho investiga como aprimorar a margem de ruído estática de circuitos síncronos digitais que irão operar em tensões no regime de tensão próximo ou abaixo do limiar. Esta investigação produz um conjunto de três contribuições originais. A primeira é uma ferramenta capaz de avaliar automaticamente a margem de ruído estática de células CMOS combinacionais. A segunda contribuição é uma metodologia realista para estimar a margem de ruído estática considerando variações de processo, tensão e temperatura. Os resultados obtidos mostram que a metodologia proposta permitiu reduzir até 70% do pessimismo das margens de ruído estática, Por último, a terceira contribuição é um fluxo de projeto de células combinacionais digitais considerando ruído, e uma abordagem para avaliar a margem de ruído estática de circuitos complexos durante a etapa de síntese lógica. A biblioteca de células resultante deste fluxo obteve maior margem de ruído (até 24%) e menor variação entre diferentes células (até 62%)

Design of Low Power Data Preserving Flip Flop Using MTCMOS Technique

In order to reduce overall power consumption, a well-known technique is to scale supply voltages. However, to maintain performance, device threshold voltages must scale as well, which will cause sub threshold leakage currents to increase exponentially. The sub threshold voltage has to affect the two parameters one is the delay and other one is the sub threshold leakage current. Smaller the threshold voltage smaller will be delay while larger will be the sub threshold current. Controlling sub threshold leakage has been explored significantly in the literature, especially in the context of reducing leakage currents in burst mode type circuits, where the system spends the majority of the time in an idle standby, or sleep, state where no computation is taking place. MTCMOS or multi-threshold CMOS has been proposed as a very effective technique for reducing leakage currents during the standby by state by utilizing high sleep devices to gate the power supplies of a low logic block. Although MTCMOS circuit techniques are effective for controlling leakage currents in combinational logic, a drawback is that it can cause internal nodes to float, and cannot be directly used in standard memory cells without corrupting stored data. As a result, several researchers have explored possible MTCMOS latch designs that can reduce leakage currents yet maintain state during the standby modes. In this work a data preserving flip flop with reduced leakage power is designed using MTCMOS technique in 90nm technology with the help of CADENCE tool. The simulation results have shown that the leakage power is reduced by 25.70% compared to CMOS flip flop

Design and Assembly of High-Temperature Signal Conditioning System on LTCC with Silicon Carbide CMOS Circuits

The objective of the work described in this dissertation paper is to develop a prototype electronic module on a low-temperature co-fired ceramic (LTCC) material. The electronic module would perform signal conditioning of sensor signals (thermocouples) operating under extreme conditions for applications like gas turbines to collect data on the health of the turbine blades during operation so that the turbines do not require shutdown for inspection to determine if maintenance is required. The collected data can indicate when such shutdowns, which cost $1M per day, should be scheduled and maintenance actually performed. The circuits for the signal conditioning system within the prototype module must survive the extreme temperature, pressure, and centrifugal force, or G-force, present in these settings. Multiple fabrication runs on different integrated silicon carbide (SiC) process technologies have been carried out to meet the system requirements. The key circuits described in this dissertation are - two-stage op amp topologies and voltage reference, which are designed and fabricated in a new SiC CMOS process. The SiC two-stage op amp with PFET differential input pair showed 48.9 dB of DC gain at 500oC. The voltage reference is the first in SiC CMOS technology to employ an op amp-based topology. The op amp circuit in the voltage reference is a two-stage with NFET differential input pair that uses the indirect compensation technique for the first time in the SiC CMOS process to provide 42.5 dB gain at 350oC. The designed prototype module implemented with these circuits was verified to provide signal conditioning and signal transmission at 300oC. The signal transmission circuit on the module was also verified to operate with a resonant inductive wireless power transfer method at a frequency of 11.8 MHz for the first time. A second prototype module was also developed with the previously fabricated 1.2 µm SiC CMOS process. The second module was successfully tested (with wired power supply) to operate at 440oC inside a probe-station and also verified for the first time to sustain signal transmission (34.65 MHz) capability inside a spin-rig at a rotational speed of 10,920 rpm. All designed modules have dimensions of (length) 68.5 mm by (width) 34.3 mm to conform to the physical size requirements of the gas turbine blade

Asynchronous Circuit Stacking for Simplified Power Management

As digital integrated circuits (ICs) continue to increase in complexity, new challenges arise for designers. Complex ICs are often designed by incorporating multiple power domains therefore requiring multiple voltage converters to produce the corresponding supply voltages. These converters not only take substantial on-chip layout area and/or off-chip space, but also aggregate the power loss during the voltage conversions that must occur fast enough to maintain the necessary power supplies. This dissertation work presents an asynchronous Multi-Threshold NULL Convention Logic (MTNCL) “stacked” circuit architecture that alleviates this problem by reducing the number of voltage converters needed to supply the voltage the ICs operate at. By stacking multiple MTNCL circuits between power and ground, supplying a multiple of VDD to the entire stack and incorporating simple control mechanisms, the dynamic range fluctuation problem can be mitigated. A 130nm Bulk CMOS process and a 32nm Silicon-on-Insulator (SOI) CMOS process are used to evaluate the theoretical effect of stacking different circuitry while running different workloads. Post parasitic physical implementations are then carried out in the 32nm SOI process for demonstrating the feasibility and analyzing the advantages of the proposed MTNCL stacking architecture