NASA Tech Briefs, May 2012

Topics covered include: An "Inefficient Fin" Non-Dimensional Parameter to Measure Gas Temperatures Efficiently; On-Wafer Measurement of a Multi-Stage MMIC Amplifier with 10 dB of Gain at 475 GHz; Software to Control and Monitor Gas Streams; Miniaturized Laser Heterodyne Radiometer (LHR) for Measurements of Greenhouse Gases in the Atmospheric Column; Anomaly Detection in Test Equipment via Sliding Mode Observers; Absolute Position of Targets Measured Through a Chamber Window Using Lidar Metrology Systems; Goldstone Solar System Radar Waveform Generator; Fast and Adaptive Lossless Onboard Hyperspectral Data Compression System; Iridium Interfacial Stack - IrIS; Downsampling Photodetector Array with Windowing; Optical Phase Recovery and Locking in a PPM Laser Communication Link; High-Speed Edge-Detecting Line Scan Smart Camera; Optical Communications Channel Combiner; Development of Thermal Infrared Sensor to Supplement Operational Land Imager; Amplitude-Stabilized Oscillator for a Capacitance-Probe Electrometer; Automated Performance Characterization of DSN System Frequency Stability Using Spacecraft Tracking Data; Histogrammatic Method for Determining Relative Abundance of Input Gas Pulse; Predictive Sea State Estimation for Automated Ride Control and Handling - PSSEARCH; LEGION: Lightweight Expandable Group of Independently Operating Nodes; Real-Time Projection to Verify Plan Success During Execution; Automated Performance Characterization of DSN System Frequency Stability Using Spacecraft Tracking Data; Web-Based Customizable Viewer for Mars Network Overflight Opportunities; Fabrication of a Cryogenic Terahertz Emitter for Bolometer Focal Plane Calibrations; Fabrication of an Absorber-Coupled MKID Detector; Graphene Transparent Conductive Electrodes for Next- Generation Microshutter Arrays; Method of Bonding Optical Elements with Near-Zero Displacement; Free-Mass and Interface Configurations of Hammering Mechanisms; Wavefront Compensation Segmented Mirror Sensing and Control; Long-Life, Lightweight, Multi-Roller Traction Drives for Planetary Vehicle Surface Exploration; Reliable Optical Pump Architecture for Highly Coherent Lasers Used in Space Metrology Applications; Electrochemical Ultracapacitors Using Graphitic Nanostacks; Improved Whole-Blood-Staining Device; Monitoring Location and Angular Orientation of a Pill; Molecular Technique to Reduce PCR Bias for Deeper Understanding of Microbial Diversity; Laser Ablation Electrodynamic Ion Funnel for In Situ Mass Spectrometry on Mars; High-Altitude MMIC Sounding Radiometer for the Global Hawk Unmanned Aerial Vehicle; PRTs and Their Bonding for Long-Duration, Extreme-Temperature Environments; Mid- and Long-IR Broadband Quantum Well Photodetector; 3D Display Using Conjugated Multiband Bandpass Filters; Real-Time, Non-Intrusive Detection of Liquid Nitrogen in Liquid Oxygen at High Pressure and High Flow; Method to Enhance the Operation of an Optical Inspection Instrument Using Spatial Light Modulators; Dual-Compartment Inflatable Suitlock; Large-Strain Transparent Magnetoactive Polymer Nanocomposites; Thermodynamic Vent System for an On-Orbit Cryogenic Reaction Control Engine; Time Distribution Using SpaceWire in the SCaN Testbed on ISS; and Techniques for Solution- Assisted Optical Contacting

Vidutinių dažnių 5G belaidžių tinklų galios stiprintuvų tyrimas

This dissertation addresses the problems of ensuring efficient radio fre-quency transmission for 5G wireless networks. Taking into account, that the next generation 5G wireless network structure will be heterogeneous, the device density and their mobility will increase and massive MIMO connectivity capability will be widespread, the main investigated problem is formulated – increasing the efficiency of portable mid-band 5G wireless network CMOS power amplifier with impedance matching networks. The dissertation consists of four parts including the introduction, 3 chapters, conclusions, references and 3 annexes. The investigated problem, importance and purpose of the thesis, the ob-ject of the research methodology, as well as the scientific novelty are de-fined in the introduction. Practical significance of the obtained results, defended state-ments and the structure of the dissertation are also included. The first chapter presents an extensive literature analysis. Latest ad-vances in the structure of the modern wireless network and the importance of the power amplifier in the radio frequency transmission chain are de-scribed in detail. The latter is followed by different power amplifier archi-tectures, parameters and their improvement techniques. Reported imped-ance matching network design methods are also discussed. Chapter 1 is concluded distinguishing the possible research vectors and defining the problems raised in this dissertation. The second chapter is focused around improving the accuracy of de-signing lumped impedance matching network. The proposed methodology of estimating lumped inductor and capacitor parasitic parameters is dis-cussed in detail provi-ding complete mathematical expressions, including a summary and conclusions. The third chapter presents simulation results for the designed radio fre-quency power amplifiers. Two variations of Doherty power amplifier archi-tectures are presented in the second part, covering the full step-by-step de-sign and simulation process. The latter chapter is concluded by comparing simulation and measurement results for all designed radio frequency power amplifiers. General conclusions are followed by an extensive list of references and a list of 5 publications by the author on the topic of the dissertation. 5 papers, focusing on the subject of the discussed dissertation, have been published: three papers are included in the Clarivate Analytics Web of Sci-ence database with a citation index, one paper is included in Clarivate Ana-lytics Web of Science database Conference Proceedings, and one paper has been published in unreferred international conference preceedings. The au-thor has also made 9 presentations at 9 scientific conferences at a national and international level.Dissertatio

Journal of Telecommunications and Information Technology, 2001, nr 3

kwartalni

FPGA-Based Software GNSS Receiver Design for Satellite Applications

Global Navigation Satellite System (GNSS) receiver technology has tremendous scope for satellite applications such as radio occultation, precise orbit determination and reflectometry. Spaceborne GNSS receivers are characterised by low power requirements, high processing speed and radiation resistant electronic components. Such sophisticated receivers, also called hardware GNSS receivers, are fabricated for specific applications and hence lack design flexibility. On the other hand, a software GNSS receiver allows easy design modifications without any hardware component replacement. Software receivers employ reconfigurable hardware elements called Field Programmable Gate Arrays (FPGAs). In this research, a low-power, low-cost software GNSS receiver has been designed and developed using a combination of a microprocessor and FPGA (System-on-Chip or SoC). The developed software GNSS receiver is capable of detecting GPS satellites, tracking them and computing receiver position estimates. Efficient task partitioning is achieved by implementing operations in both, the FPGA and the microprocessor. Also demonstrated is the improvement of processing speed by 20% when certain GNSS receiver operations are performed in the FPGA instead of the microprocessor

DVB-S Signal Tracking Techniques for Mobile Phased Arrays

Abstract—A system that uses adaptive beamforming techniques for mobile Digital Video Broadcasting Satellite (DVB-S) reception is proposed in this paper. The purpose is to enable DVB-S reception in moving vehicles. Phased arrays are able to electronically track the desired signal during dynamic behaviour of the vehicle the array is mounted on.\ud The proposed system uses blind beamforming to adapt the array steering vector to changing signal (conditions and) directions. Movement of the vehicle, the phased array is mounted on, leads to modulus and phase deviations at the beamformer output. An extended version of the Constant Modulus Algorithm (CMA) algorithm is used to adapt the steering vector weights to compensate for those deviations.\ud For simulation of the proposed system a model of vehicle dynamics is used to generate realistic antenna data. Simulation of the proposed system based on this antenna data shows appropriate corrections for modulus and phase deviations

W-band noise radar in short range applications

Noise Radar Technology (NRT) uses noise waveforms (continuous or pulsed) as a radar signal and correlation processing of the returns for their optimal reception. This paper is devoted to some possible applications of NRT in civil field, in particular to millimetre-wave radars, with comparison of the use of Noise W-band radar versus the more classical FM-CW or pulse compression solutions

Analog and Digital Signal Processing Strategies for a Six-Port based Direction of Arrival Detector

This thesis presents technologies and prototypes measurements to acquire and to process the data for a DOA system based on a Phase-Measurement performed by a Six-Portope

Embedded System Optimization of Radar Post-processing in an ARM CPU Core

Algorithms executed on the radar processor system contributes to a significant performance bottleneck of the overall radar system. One key performance concern is the latency in target detection when dealing with hard deadline systems. Research has shown software optimization as one major contributor to radar system performance improvements. This thesis aims at software optimizations using a manual and automatic approach and analyzing the results to make informed future decisions while working with an ARM processor system. In order to ascertain an optimized implementation, a question put forward was whether the algorithms on the ARM processor could work with a 6-antenna implementation without a decline in the performance. However, an answer would also help project how many additional algorithms can still be added without performance decline. The manual optimization was done based on the quantitative analysis of the software execution time. The manual optimization approach looked at the vectorization strategy using the NEON vector register on the ARM CPU to reimplement the initial Constant False Alarm Rate(CFAR) Detection algorithm. An additional optimization approach was eliminating redundant loops while going through the Range Gates and Doppler filters. In order to determine the best compiler for automatic code optimization for the radar algorithms on the ARM processor, the GCC and Clang compilers were used to compile the initial algorithms and the optimized implementation on the radar post-processing stage. Analysis of the optimization results showed that it is possible to run the radar post-processing algorithms on the ARM processor at the 6-antenna implementation without system load stress. In addition, the results show an excellent headroom margin based on the defined scenario. The result analysis further revealed that the effect of dynamic memory allocation could not be underrated in situations where performance is a significant concern. Additional statements from the result demonstrated that the GCC and Clang compiler has their strength and weaknesses when used in the compilation. One limiting factor to note on the optimization using the NEON register is the sample size’s effect on the optimization implementation. Although it fits into the test samples used based on the defined scenario, there might be varying results in varying window cell size situations that might not necessarily improve the time constraints