Robust Target Localization Based on Squared Range Iterative Reweighted Least Squares

In this paper, the problem of target localization in the presence of outlying sensors is tackled. This problem is important in practice because in many real-world applications the sensors might report irrelevant data unintentionally or maliciously. The problem is formulated by applying robust statistics techniques on squared range measurements and two different approaches to solve the problem are proposed. The first approach is computationally efficient; however, only the objective convergence is guaranteed theoretically. On the other hand, the whole-sequence convergence of the second approach is established. To enjoy the benefit of both approaches, they are integrated to develop a hybrid algorithm that offers computational efficiency and theoretical guarantees. The algorithms are evaluated for different simulated and real-world scenarios. The numerical results show that the proposed methods meet the Cr'amer-Rao lower bound (CRLB) for a sufficiently large number of measurements. When the number of the measurements is small, the proposed position estimator does not achieve CRLB though it still outperforms several existing localization methods.Comment: 2017 IEEE 14th International Conference on Mobile Ad Hoc and Sensor Systems (MASS): http://ieeexplore.ieee.org/document/8108770

Distributed localization of a RF target in NLOS environments

We propose a novel distributed expectation maximization (EM) method for non-cooperative RF device localization using a wireless sensor network. We consider the scenario where few or no sensors receive line-of-sight signals from the target. In the case of non-line-of-sight signals, the signal path consists of a single reflection between the transmitter and receiver. Each sensor is able to measure the time difference of arrival of the target's signal with respect to a reference sensor, as well as the angle of arrival of the target's signal. We derive a distributed EM algorithm where each node makes use of its local information to compute summary statistics, and then shares these statistics with its neighbors to improve its estimate of the target localization. Since all the measurements need not be centralized at a single location, the spectrum usage can be significantly reduced. The distributed algorithm also allows for increased robustness of the sensor network in the case of node failures. We show that our distributed algorithm converges, and simulation results suggest that our method achieves an accuracy close to the centralized EM algorithm. We apply the distributed EM algorithm to a set of experimental measurements with a network of four nodes, which confirm that the algorithm is able to localize a RF target in a realistic non-line-of-sight scenario.Comment: 30 pages, 11 figure

Localization in GPS denied environment

No abstract available

Robust Wireless Localization in Harsh Mixed Line-of-Sight/Non-Line-of-Sight Environments

This PhD thesis considers the problem of locating some target nodes in different wireless infrastructures such as wireless cellular radio networks and wireless sensor networks. To be as realistic as possible, mixed line-of-sight and non-line-of-sight (LOS/NLOS) localization environment is introduced. Both the conventional non-cooperative localization and the new emerging cooperative localization have been studied thoroughly. Owing to the random nature of the measurements, probabilistic methods are more advanced as compared to the old-fashioned geometric methods. The gist behind the probabilistic methods is to infer the unknown positions of the target nodes in an estimation process, given a set of noisy position related measurements, a probabilistic measurement model, and a few known reference positions. In contrast to the majority of the existing methods, harsh but practical constraints are taken into account: neither offline calibration nor non-line-of-sight state identification is equipped in the desired localization system. This leads to incomplete knowledge about the measurement error statistics making the inference task extremely challenging. Two new classes of localization algorithms have been proposed to jointly estimate the positions and measurement error statistics. All unknown parameters are assumed to be deterministic, and maximum likelihood estimator is sought after throughout this thesis. The first class of algorithms assumes no knowledge about the measurement error distribution and adopts a nonparametric modeling. The idea is to alternate between a pdf estimation step, which approximates the exact measurement error pdf via adaptive kernel density estimation, and a parameter estimation step, which resolves a position estimate numerically from an approximated log-likelihood function. The computational complexity of this class of algorithms scales quadratically in the number of measurements. Hence, the first class of algorithms is applicable primarily for non-cooperative localization in wireless cellular radio networks. In order to reduce the computational complexity, a second class of algorithms resorts to approximate the measurement error distribution parametrically as a linear combination of Gaussian distributions. Iterative algorithms that alternate between updating the position(s) and other parameters have been developed with the aid of expectation-maximization (EM), expectation conditional maximization (ECM) and joint maximum a posterior-maximum likelihood (JMAP-ML) criteria. As a consequence, the computational complexity turns out to scale linearly in the number of measurements. Hence, the second class of algorithms is also applicable for cooperative localization in wireless sensor networks. Apart from the algorithm design, systematical analyses in terms of Cramer-Rao lower bound, computational complexity, and communication energy consumption have also been conducted for comprehensive algorithm evaluations. Simulation and experimental results have demonstrated that the proposed algorithms all tend to achieve the fundamental limits of the localization accuracy for large data records and outperform their competitors by far when model mismatch problems can be ignored

Opportunistic timing signals for pervasive mobile localization

Mención Internacional en el título de doctorThe proliferation of handheld devices and the pressing need of location-based services call for precise and accurate ubiquitous geographic mobile positioning that can serve a vast set of devices. Despite the large investments and efforts in academic and industrial communities, a pin-point solution is however still far from reality. Mobile devices mainly rely on Global Navigation Satellite System (GNSS) to position themselves. GNSS systems are known to perform poorly in dense urban areas and indoor environments, where the visibility of GNSS satellites is reduced drastically. In order to ensure interoperability between the technologies used indoor and outdoor, a pervasive positioning system should still rely on GNSS, yet complemented with technologies that can guarantee reliable radio signals in indoor scenarios. The key fact that we exploit is that GNSS signals are made of data with timing information. We then investigate solutions where opportunistic timing signals can be extracted out of terrestrial technologies. These signals can then be used as additional inputs of the multi-lateration problem. Thus, we design and investigate a hybrid system that combines range measurements from the Global Positioning System (GPS), the world’s most utilized GNSS system, and terrestrial technologies; the most suitable one to consider in our investigation is WiFi, thanks to its large deployment in indoor areas. In this context, we first start investigating standalone WiFi Time-of-flight (ToF)-based localization. Time-of-flight echo techniques have been recently suggested for ranging mobile devices overWiFi radios. However, these techniques have yielded only moderate accuracy in indoor environments because WiFi ToF measurements suffer from extensive device-related noise which makes it challenging to differentiate between direct path from non-direct path signal components when estimating the ranges. Existing multipath mitigation techniques tend to fail at identifying the direct path when the device-related Gaussian noise is in the same order of magnitude, or larger than the multipath noise. In order to address this challenge, we propose a new method for filtering ranging measurements that is better suited for the inherent large noise as found in WiFi radios. Our technique combines statistical learning and robust statistics in a single filter. The filter is lightweight in the sense that it does not require specialized hardware, the intervention of the user, or cumbersome on-site manual calibration. This makes the method we propose as the first contribution of the present work particularly suitable for indoor localization in large-scale deployments using existing legacy WiFi infrastructures. We evaluate our technique for indoor mobile tracking scenarios in multipath environments, and, through extensive evaluations across four different testbeds covering areas up to 1000m2, the filter is able to achieve a median ranging error between 1:7 and 2:4 meters. The next step we envisioned towards preparing theoretical and practical basis for the aforementioned hybrid positioning system is a deep inspection and investigation of WiFi and GPS ToF ranges, and initial foundations of single-technology self-localization. Self-localization systems based on the Time-of-Flight of radio signals are highly susceptible to noise and their performance therefore heavily rely on the design and parametrization of robust algorithms. We study the noise sources of GPS and WiFi ToF ranging techniques and compare the performance of different selfpositioning algorithms at a mobile node using those ranges. Our results show that the localization error varies greatly depending on the ranging technology, algorithm selection, and appropriate tuning of the algorithms. We characterize the localization error using real-world measurements and different parameter settings to provide guidance for the design of robust location estimators in realistic settings. These tools and foundations are necessary to tackle the problem of hybrid positioning system providing high localization capabilities across indoor and outdoor environments. In this context, the lack of a single positioning system that is able the fulfill the specific requirements of diverse indoor and outdoor applications settings has led the development of a multitude of localization technologies. Existing mobile devices such as smartphones therefore commonly rely on a multi-RAT (Radio Access Technology) architecture to provide pervasive location information in various environmental contexts as the user is moving. Yet, existing multi-RAT architectures consider the different localization technologies as monolithic entities and choose the final navigation position from the RAT that is foreseen to provide the highest accuracy in the particular context. In contrast, we propose in this work to fuse timing range (Time-of-Flight) measurements of diverse radio technologies in order to circumvent the limitations of the individual radio access technologies and improve the overall localization accuracy in different contexts. We introduce an Extended Kalman filter, modeling the unique noise sources of each ranging technology. As a rich set of multiple ranges can be available across different RATs, the intelligent selection of the subset of ranges with accurate timing information is critical to achieve the best positioning accuracy. We introduce a novel geometrical-statistical approach to best fuse the set of timing ranging measurements. We also address practical problems of the design space, such as removal of WiFi chipset and environmental calibration to make the positioning system as autonomous as possible. Experimental results show that our solution considerably outperforms the use of monolithic technologies and methods based on classical fault detection and identification typically applied in standalone GPS technology. All the contributions and research questions described previously in localization and positioning related topics suppose full knowledge of the anchors positions. In the last part of this work, we study the problem of deriving proximity metrics without any prior knowledge of the positions of the WiFi access points based on WiFi fingerprints, that is, tuples of WiFi Access Points (AP) and respective received signal strength indicator (RSSI) values. Applications that benefit from proximity metrics are movement estimation of a single node over time, WiFi fingerprint matching for localization systems and attacks on privacy. Using a large-scale, real-world WiFi fingerprint data set consisting of 200,000 fingerprints resulting from a large deployment of wearable WiFi sensors, we show that metrics from related work perform poorly on real-world data. We analyze the cause for this poor performance, and show that imperfect observations of APs with commodity WiFi clients in the neighborhood are the root cause. We then propose improved metrics to provide such proximity estimates, without requiring knowledge of location for the observed AP. We address the challenge of imperfect observations of APs in the design of these improved metrics. Our metrics allow to derive a relative distance estimate based on two observed WiFi fingerprints. We demonstrate that their performance is superior to the related work metrics.This work has been supported by IMDEA Networks InstitutePrograma Oficial de Doctorado en Ingeniería TelemáticaPresidente: Francisco Barceló Arroyo.- Secretario: Paolo Casari.- Vocal: Marco Fior

Smart Passive Localization Using Time Difference of Arrival

A smart passive localization system using time difference of arrival (TDoA) measurements is designed and analyzed with the goal of providing the position information for the construction of frequency allocation maps

Outdoor location tracking of mobile devices in cellular networks

This paper presents a technique and experimental validation for anonymous outdoor location tracking of all users residing on a mobile cellular network. The proposed technique does not require any intervention or cooperation on the mobile side but runs completely on the network side, which is useful to automatically monitor traffic, estimate population movements, or detect criminal activity. The proposed technique exploits the topology of a mobile cellular network, enriched open map data, mode of transportation, and advanced route filtering. Current tracking algorithms for cellular networks are validated in optimal or controlled environments on a small dataset or are merely validated by simulations. In this work, validation data consisting of millions of parallel location estimations from over a million users are collected and processed in real time, in cooperation with a major network operator in Belgium. Experiments are conducted in urban and rural environments near Ghent and Antwerp, with trajectories on foot, by bike, and by car, in the months May and September 2017. It is shown that the mode of transportation, smartphone usage, and environment impact the accuracy and that the proposed AMT location tracking algorithm is more robust and outperforms existing techniques with relative improvements up to 88%. Best performances were obtained in urban environments with median accuracies up to 112 m