Efficient metal halide perovskite light-emitting diodes with significantly improved light extraction on nanophotonic substrates.

Metal halide perovskite has emerged as a promising material for light-emitting diodes. In the past, the performance of devices has been improved mainly by optimizing the active and charge injection layers. However, the large refractive index difference among different materials limits the overall light extraction. Herein, we fabricate efficient methylammonium lead bromide light-emitting diodes on nanophotonic substrates with an optimal device external quantum efficiency of 17.5% which is around twice of the record for the planar device based on this material system. Furthermore, optical modelling shows that a high light extraction efficiency of 73.6% can be achieved as a result of a two-step light extraction process involving nanodome light couplers and nanowire optical antennas on the nanophotonic substrate. These results suggest that utilization of nanophotonic structures can be an effective approach to achieve high performance perovskite light-emitting diodes

Remote temperature mapping of high-power InGaN/GaN MQW flip-chip design LEDs

We report on the study of heat 2D-distribution in InGaN LEDs with the stress made on local device overheating and temperature gradients inside the structure. The MQW InGaN/GaN/sapphire blue LEDs are designed as bottom emitting devices where light escapes the structure through the transparent GaN current spreading layer and sapphire substrate, whereas the LED structure with high-reflectivity Ni/Ag p-contact is bonded to the thermally conductive Si submount by a flip-chip method. The measurements are performed with an IR microscope operating in a time-resolved mode (3-5 μm spectral range, <20 μm spatial and 10 μs temporal resolution), while scanning a heat emission map through a transparent sapphire substrate. We show how current crowding (which is difficult to avoid) causes a local hot region near the n-contact pads and affects the performance of the device at a high injection level

Photonic quasi-crystal LEDs: design, modelling, and optimisation

In this paper we investigate improvement in performance attainable by etching Photonic Crystals and Photonic Quasi-Crystals into the top emitting surface of LEDs. We describe the physical mechanisms of extraction enhancement through ordered surface patterning and investigate benefits in terms of total extraction enhancement, beam directionality, and far field beam quality. Factors such as lattice geometry, etch depth, and epitaxy thickness are investigated. We show that a great variety of far field beam profiles of benefit in applications such as projection TV light engines and direct flat panel display illumination can be obtained simply by adjusting geometric design parameters. Our results show that PCs can provide significant improvement in extraction enhancement for applications requiring non Lambertian beam shapes when etched into standard "production line" epitaxy wafers in comparison to "state of the art" surface roughened thin-GaN LED devices. We investigate PC beam steering effects in these devices confirming that PCs do in fact re-direct light from trapped modes confined within the epi-structure to radiating modes. We also show that by tailoring the thickness of the epi-structure to complement the properties of the photonic crystal, extraction enhancement can be improved by a factor of 9 for some applications

Structural and spectral dynamics of single-crystalline Ruddlesden-Popper phase halide perovskite blue light-emitting diodes.

Achieving perovskite-based high-color purity blue-emitting light-emitting diodes (LEDs) is still challenging. Here, we report successful synthesis of a series of blue-emissive two-dimensional Ruddlesden-Popper phase single crystals and their high-color purity blue-emitting LED demonstrations. Although this approach successfully achieves a series of bandgap emissions based on the different layer thicknesses, it still suffers from a conventional temperature-induced device degradation mechanism during high-voltage operations. To understand the underlying mechanism, we further elucidate temperature-induced device degradation by investigating the crystal structural and spectral evolution dynamics via in situ temperature-dependent single-crystal x-ray diffraction, photoluminescence (PL) characterization, and density functional theory calculation. The PL peak becomes asymmetrically broadened with a marked intensity decay, as temperature increases owing to [PbBr6]4- octahedra tilting and the organic chain disordering, which results in bandgap decrease. This study indicates that careful heat management under LED operation is a key factor to maintain the sharp and intense emission

The Role Of Photonics In Energy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)In celebration of the 2015 International Year of Light, we highlight major breakthroughs in photonics for energy conversion and conservation. The section on energy conversion discusses the role of light in solar light harvesting for electrical and thermal power generation; chemical energy conversion and fuel generation; as well as photonic sensors for energy applications. The section on energy conservation focuses on solid-state lighting, flat-panel displays, and optical communications and interconnects. (C) The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.5Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)U.S. National Science Foundation [DMR-1309459, ECCS 1408051, DMR 1505122]U.S. Office of Naval ResearchEngineering and Physical Sciences Research Council of the UK [EP/K00042X, EP/L012294]European Research Council of the European Union [321305]Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP

Coherently coupled photonic-crystal surface-emitting laser array

The realization of a 1 × 2 coherently coupled photonic crystal surface emitting laser array is reported. New routes to power scaling are discussed and the electronic control of coherence is demonstrated

Nanomaterial integration in micro LED technology: Enhancing efficiency and applications

The micro-light emitting diode (µLED) technology is poised to revolutionise display applications through the introduction of nanomaterials and Group III-nitride nanostructures. This review charts state-of-the-art in this important area of micro-LEDs by highlighting their key roles, progress and concerns. The review encompasses details from various types of nanomaterials to the complexity of gallium nitride (GaN) and III nitride nanostructures. The necessity to integrate nanomaterials with III-nitride structures to create effective displays that could disrupt industries was emphasised in this review. Commercialisation challenges and the economic enhancement of micro-LED integration into display applications using monolithic integrated devices have also been discussed. Furthermore, different approaches in micro-LED development are discussed from top-down and bottom-up approaches. The last part of the review focuses on nanomaterials employed in the production of micro-LED displays. It also highlights the combination of III-V LEDs with silicon LCDs and perovskite-based micro-LED displays. There is evidence that efficiency and performance have improved significantly since the inception of the use of nanomaterials in manufacturing these