10,798 research outputs found
DTLS Performance in Duty-Cycled Networks
The Datagram Transport Layer Security (DTLS) protocol is the IETF standard
for securing the Internet of Things. The Constrained Application Protocol,
ZigBee IP, and Lightweight Machine-to-Machine (LWM2M) mandate its use for
securing application traffic. There has been much debate in both the
standardization and research communities on the applicability of DTLS to
constrained environments. The main concerns are the communication overhead and
latency of the DTLS handshake, and the memory footprint of a DTLS
implementation. This paper provides a thorough performance evaluation of DTLS
in different duty-cycled networks through real-world experimentation, emulation
and analysis. In particular, we measure the duration of the DTLS handshake when
using three duty cycling link-layer protocols: preamble-sampling, the IEEE
802.15.4 beacon-enabled mode and the IEEE 802.15.4e Time Slotted Channel
Hopping mode. The reported results demonstrate surprisingly poor performance of
DTLS in radio duty-cycled networks. Because a DTLS client and a server exchange
more than 10 signaling packets, the DTLS handshake takes between a handful of
seconds and several tens of seconds, with similar results for different duty
cycling protocols. Moreover, because of their limited memory, typical
constrained nodes can only maintain 3-5 simultaneous DTLS sessions, which
highlights the need for using DTLS parsimoniously.Comment: International Symposium on Personal, Indoor and Mobile Radio
Communications (PIMRC - 2015), IEEE, IEEE, 2015,
http://pimrc2015.eee.hku.hk/index.htm
Old Wine in New Skins? Revisiting the Software Architecture for IP Network Stacks on Constrained IoT Devices
In this paper, we argue that existing concepts for the design and
implementation of network stacks for constrained devices do not comply with the
requirements of current and upcoming Internet of Things (IoT) use cases. The
IoT requires not only a lightweight but also a modular network stack, based on
standards. We discuss functional and non-functional requirements for the
software architecture of the network stack on constrained IoT devices. Then,
revisiting concepts from the early Internet as well as current implementations,
we propose a future-proof alternative to existing IoT network stack
architectures, and provide an initial evaluation of this proposal based on its
implementation running on top of state-of-the-art IoT operating system and
hardware.Comment: 6 pages, 2 figures and table
Information Centric Networking in the IoT: Experiments with NDN in the Wild
This paper explores the feasibility, advantages, and challenges of an
ICN-based approach in the Internet of Things. We report on the first NDN
experiments in a life-size IoT deployment, spread over tens of rooms on several
floors of a building. Based on the insights gained with these experiments, the
paper analyses the shortcomings of CCN applied to IoT. Several interoperable
CCN enhancements are then proposed and evaluated. We significantly decreased
control traffic (i.e., interest messages) and leverage data path and caching to
match IoT requirements in terms of energy and bandwidth constraints. Our
optimizations increase content availability in case of IoT nodes with
intermittent activity. This paper also provides the first experimental
comparison of CCN with the common IoT standards 6LoWPAN/RPL/UDP.Comment: 10 pages, 10 figures and tables, ACM ICN-2014 conferenc
Bindings and RESTlets: a novel set of CoAP-based application enablers to build IoT applications
Sensors and actuators are becoming important components of Internet of Things (IoT) applications. Today, several approaches exist to facilitate communication of sensors and actuators in IoT applications. Most communications go through often proprietary gateways requiring availability of the gateway for each and every interaction between sensors and actuators. Sometimes, the gateway does some processing of the sensor data before triggering actuators. Other approaches put this processing logic further in the cloud. These approaches introduce significant latencies and increased number of packets. In this paper, we introduce a CoAP-based mechanism for direct binding of sensors and actuators. This flexible binding solution is utilized further to build IoT applications through RESTlets. RESTlets are defined to accept inputs and produce outputs after performing some processing tasks. Sensors and actuators could be associated with RESTlets (which can be hosted on any device) through the flexible binding mechanism we introduced. This approach facilitates decentralized IoT application development by placing all or part of the processing logic in Low power and Lossy Networks (LLNs). We run several tests to compare the performance of our solution with existing solutions and found out that our solution reduces communication delay and number of packets in the LLN
TCP in the Internet of Things: from ostracism to prominence
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.TCP has traditionally been neglected as a transport-layer protocol for the Internet of Things (IoT). However, recent trends and industry needs are favoring TCP presence in IoT environments. In this article, we describe the main IoT scenarios where TCP will be used. We then analyze the historically claimed issues of TCP in the IoT context. We argue that, in contrast to generally accepted wisdom, most of those possible issues fall in one of the following categories: i) are also found in well-accepted IoT end-to-end reliability mechanisms, ii) can be solved, or iii) are not actual issues. Considering the future prominent role of TCP in the IoT, we provide recommendations for lightweight TCP implementation and suitable operation in such scenarios, based on our IETF standardization work on the topic.Postprint (author's final draft
Securing Internet of Things with Lightweight IPsec
Real-world deployments of wireless sensor networks (WSNs) require
secure communication. It is important that a receiver is able to verify that sensor
data was generated by trusted nodes. In some cases it may also be necessary
to encrypt sensor data in transit. Recently, WSNs and traditional IP networks
are more tightly integrated using IPv6 and 6LoWPAN. Available IPv6 protocol
stacks can use IPsec to secure data exchange. Thus, it is desirable to extend
6LoWPAN such that IPsec communication with IPv6 nodes is possible. It is
beneficial to use IPsec because the existing end-points on the Internet do not
need to be modified to communicate securely with the WSN. Moreover, using
IPsec, true end-to-end security is implemented and the need for a trustworthy
gateway is removed.
In this paper we provide End-to-End (E2E) secure communication between
an IP enabled sensor nodes and a device on traditional Internet. This is the
first compressed lightweight design, implementation, and evaluation of 6LoWPAN
extension for IPsec on Contiki. Our extension supports both IPsec's Authentication
Header (AH) and Encapsulation Security Payload (ESP). Thus,
communication endpoints are able to authenticate, encrypt and check the integrity
of messages using standardized and established IPv6 mechanisms
A Low-Power CoAP for Contiki
Internet of Things devices will by and large
be battery-operated, but existing application protocols
have typically not been designed with power-efficiency in
mind. In low-power wireless systems, power-efficiency is
determined by the ability to maintain a low radio duty
cycle: keeping the radio off as much as possible. We
present an implementation of the IETF Constrained
Application Protocol (CoAP) for the Contiki operating system
that leverages the ContikiMAC low-power duty cycling
mechanism to provide power efficiency. We experimentally
evaluate our low-power CoAP, demonstrating that an
existing application layer protocol can be made power-efficient
through a generic radio duty cycling mechanism.
To the best of our knowledge, our CoAP implementation is
the first to provide power-efficient operation through radio
duty cycling. Our results question the need for specialized
low-power mechanisms at the application layer, instead
providing low-power operation only at the radio duty
cycling layer
Evolving SDN for Low-Power IoT Networks
Software Defined Networking (SDN) offers a flexible and scalable architecture
that abstracts decision making away from individual devices and provides a
programmable network platform. However, implementing a centralized SDN
architecture within the constraints of a low-power wireless network faces
considerable challenges. Not only is controller traffic subject to jitter due
to unreliable links and network contention, but the overhead generated by SDN
can severely affect the performance of other traffic. This paper addresses the
challenge of bringing high-overhead SDN architecture to IEEE 802.15.4 networks.
We explore how traditional SDN needs to evolve in order to overcome the
constraints of low-power wireless networks, and discuss protocol and
architectural optimizations necessary to reduce SDN control overhead - the main
barrier to successful implementation. We argue that interoperability with the
existing protocol stack is necessary to provide a platform for controller
discovery and coexistence with legacy networks. We consequently introduce
{\mu}SDN, a lightweight SDN framework for Contiki, with both IPv6 and
underlying routing protocol interoperability, as well as optimizing a number of
elements within the SDN architecture to reduce control overhead to practical
levels. We evaluate {\mu}SDN in terms of latency, energy, and packet delivery.
Through this evaluation we show how the cost of SDN control overhead (both
bootstrapping and management) can be reduced to a point where comparable
performance and scalability is achieved against an IEEE 802.15.4-2012 RPL-based
network. Additionally, we demonstrate {\mu}SDN through simulation: providing a
use-case where the SDN configurability can be used to provide Quality of
Service (QoS) for critical network flows experiencing interference, and we
achieve considerable reductions in delay and jitter in comparison to a scenario
without SDN
- …