Newark Engineering Notes, Volume 2, No. 2, November 1938

A journal by the administration, faculty and alumni of the Newark College of Engineering. This issue includes: The President\u27s Diary Designing the Rim Under Gear Teeth by Waldemar F. Larsen Evolution of the Electrical Courses by James C. Peet Registrar\u27s Report Alumni Personalities A Graphical Representation of the a-Operator by S. Fishman The Gyuris Storage Battery by V. T. Stewart Introduction to Engineering Physics book review by Eastman Smith Student Engineering Societieshttps://digitalcommons.njit.edu/nen/1007/thumbnail.jp

Hyper Converged Infrastructures: Beyond virtualization

Hyper Convergence has brought virtualization and IT strategies to a new level. Datacenters are undergoing a deep paradigm shift from a hardware-centric to an application-centric approach which leverages on software defined architectures, while IT is more and more being delivered as services rather than assets or products. Throughout different evolving phases since the initial attempts to convergence, the concept has been refined down to a level where,ultimately, a whole datacenter could be fully managed from a centralized single point, abstracting the whole hardware layer and exposing it to the administrators as a transparent pool of resources. This paper analyzes the evolution of infrastructures and tries to dig into the reality and convenience of Hyper Convergence

Methodological considerations in the analysis of fecal glucocorticoid metabolites in tufted capuchins (Cebus apella)

Analysis of fecal glucocorticoid (GC) metabolites has recently become the standard method to monitor adrenocortical activity in primates noninvasively. However, given variation in the production, metabolism, and excretion of GCs across species and even between sexes, there are no standard methods that are universally applicable. In particular, it is important to validate assays intended to measure GC production, test extraction and storage procedures, and consider the time course of GC metabolite excretion relative to the production and circulation of the native hormones. This study examines these four methodological aspects of fecal GC metabolite analysis in tufted capuchins (Cebus apella). Specifically, we conducted an adrenocorticotrophic hormone (ACTH) challenge on one male and one female capuchin to test the validity of four GC enzyme immunoassays (EIAs) and document the time course characterizing GC me- tabolite excretion in this species. In addition, we compare a common field-friendly technique for extracting fecal GC metabolites to an established laboratory extraction methodology and test for effects of storing “field extracts” for up to 1 yr. Results suggest that a corticosterone EIA is most sensitive to changes in GC production, provides reliable measures when extracted according to the field method, and measures GC metabolites which remain highly stable after even 12 mo of storage. Further, the time course of GC metabolite excretion is shorter than that described yet for any primate taxa. These results provide guidelines for studies of GCs in tufted capuchins, and underscore the importance of validating methods for fecal hormone analysis for each species of interest

The Efficient Water Market of the Northern Colorado Water Conservancy District: Colorado, USA

The case study presented is focused on the use of tradable and rentable water permits designed to maximise the efficiency of the use of water resources in Colorado (USA). The State of Colorado is divided into two distinct regions: the eastern, dry plains and the western areas that start with the Rocky Mountains and extend through rugged lands to the western border of the State. Rainfall and snow are heavy on the western side of the Rockies, while the eastern slopes of the mountains (the "East Slope") and the plains are semi-arid. In order to compensate this unequal distribution of the water resources, a complicated project of water transfer has been designed. The Colorado-Big Thompson Project is the largest transmountain water diversion project in Colorado. Built between 1938 and 1957, the C-BT Project provides supplemental water to 30 cities and towns and is used to provide supplemental irrigation to 693,000 acres of north-eastern. In order to efficiently manage the "foreign water provision" ensured by the CB-t project, it was founded the Northern Colorado Water Conservation District (NCWCD). It was established in 1937 to contract with the Federal Government to build the large trans-mountain water transfer project. NCWCD is responsible for the diversion works of the project and for the allocation of water on the eastern side of the mountains

A layered framework for pattern-based ontology evolution

The challenge of ontology-driven modelling of information components is well known in both academia and industry. In this paper, we present a novel approach to deal with customisation and abstraction of ontology-based model evolution. As a result of an empirical study, we identify a layered change operator framework based on the granularity, domain-specificity and abstraction of changes. The implementation of the operator framework is supported through layered change logs. Layered change logs capture the objective of ontology changes at a higher level of granularity and support a comprehensive understanding of ontology evolution. The layered change logs are formalised using a graph-based approach. We identify the recurrent ontology change patterns from an ontology change log for their reuse. The identified patterns facilitate optimizing and improving the definition of domain-specific change patterns

Virtue integrated platform : holistic support for distributed ship hydrodynamic design

Ship hydrodynamic design today is often still done in a sequential approach. Tools used for the different aspects of CFD (Computational Fluid Dynamics) simulation (e.g. wave resistance, cavitation, seakeeping, and manoeuvring), and even for the different levels of detail within a single aspect, are often poorly integrated. VIRTUE (the VIRtual Tank Utility in Europe) project has the objective to develop a platform that will enable various distributed CFD and design applications to be integrated so that they may operate in a unified and holistic manner. This paper presents an overview of the VIRTUE Integrated Platform (VIP), e.g. research background, objectives, current work, user requirements, system architecture, its implementation, evaluation, and current development and future work

Toward sustainable management: 2D modelling of a self-cleaning system to improve geometry in front of the flushing gate

This paper aims to show how numerical modelling based on 2D SWE can be used to analyze the cleaning effectiveness of flushing waves in storm tanks. The case study under consideration is an existing storm tank located in Badalona, a municipality of Barcelona, Spain. Storm tank cleaning systems are critical features that must be carefully addressed. If not appropriately addressed, operation and maintenance work costs can drastically increase. There are numerous currently available technologies for cleaning storage tanks. However, no specific guide on this field has been identified. References are provided by the manufacturers through their commercial catalogues. Generally, this information is not based on experimental or numerical experiences or results have not been published in the literature of scientific papers. In this study, a public domain software (IBER) was used to develop 2D hydraulic analysis of the selected tank. The results obtained show how the phenomenon of recirculation is acting in some areas of the lane. This implies a dissipation of energy, thus causing difficulties in terms of cleaning procedures. Furthermore, two new scenarios have been tested to determine how a different lane width might affect hydrodynamic behavior. A newly suggested geometry for the existing lane of the tank is proposed by using the numerical modeling software. The proposed geometry in the current pilot tank achieves higher velocities and avoids recirculation areas. The results demonstrate that numerical modelling of these types of processes is possible with the computer models available (commercial codes) and can be used to optimize cleaning system designPeer ReviewedPostprint (published version

Hot-melt co-extrusion for the production of fixed-dose combination products with a controlled release ethylcellulose matrix core

A