Towards Automated Network Configuration Management

Modern networks are designed to satisfy a wide variety of competing goals related to network operation requirements such as reachability, security, performance, reliability and availability. These high level goals are realized through a complex chain of low level configuration commands performed on network devices. As networks become larger, more complex and more heterogeneous, human errors become the most significant threat to network operation and the main cause of network outage. In addition, the gap between high-level requirements and low-level configuration data is continuously increasing and difficult to close. Although many solutions have been introduced to reduce the complexity of configuration management, network changes, in most cases, are still manually performed via low--level command line interfaces (CLIs). The Internet Engineering Task Force (IETF) has introduced NETwork CONFiguration (NETCONF) protocol along with its associated data--modeling language, YANG, that significantly reduce network configuration complexity. However, NETCONF is limited to the interaction between managers and agents, and it has weak support for compliance to high-level management functionalities. We design and develop a network configuration management system called AutoConf that addresses the aforementioned problems. AutoConf is a distributed system that manages, validates, and automates the configuration of IP networks. We propose a new framework to augment NETCONF/YANG framework. This framework includes a Configuration Semantic Model (CSM), which provides a formal representation of domain knowledge needed to deploy a successful management system. Along with CSM, we develop a domain--specific language called Structured Configuration language to specify configuration tasks as well as high--level requirements. CSM/SCL together with NETCONF/YANG makes a powerful management system that supports network--wide configuration. AutoConf supports two levels of verifications: consistency verification and behavioral verification. We apply a set of logical formalizations to verifying the consistency and dependency of configuration parameters. In behavioral verification, we present a set of formal models and algorithms based on Binary Decision Diagram (BDD) to capture the behaviors of forwarding control lists that are deployed in firewalls, routers, and NAT devices. We also adopt an enhanced version of Dyna-Q algorithm to support dynamic adaptation of network configuration in response to changes occurred during network operation. This adaptation approach maintains a coherent relationship between high level requirements and low level device configuration. We evaluate AutoConf by running several configuration scenarios such as interface configuration, RIP configuration, OSPF configuration and MPLS configuration. We also evaluate AutoConf by running several simulation models to demonstrate the effectiveness and the scalability of handling large-scale networks

SDN Architecture and Southbound APIs for IPv6 Segment Routing Enabled Wide Area Networks

The SRv6 architecture (Segment Routing based on IPv6 data plane) is a promising solution to support services like Traffic Engineering, Service Function Chaining and Virtual Private Networks in IPv6 backbones and datacenters. The SRv6 architecture has interesting scalability properties as it reduces the amount of state information that needs to be configured in the nodes to support the network services. In this paper, we describe the advantages of complementing the SRv6 technology with an SDN based approach in backbone networks. We discuss the architecture of a SRv6 enabled network based on Linux nodes. In addition, we present the design and implementation of the Southbound API between the SDN controller and the SRv6 device. We have defined a data-model and four different implementations of the API, respectively based on gRPC, REST, NETCONF and remote Command Line Interface (CLI). Since it is important to support both the development and testing aspects we have realized an Intent based emulation system to build realistic and reproducible experiments. This collection of tools automate most of the configuration aspects relieving the experimenter from a significant effort. Finally, we have realized an evaluation of some performance aspects of our architecture and of the different variants of the Southbound APIs and we have analyzed the effects of the configuration updates in the SRv6 enabled nodes

A Survey on the Contributions of Software-Defined Networking to Traffic Engineering

Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567 Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-

Deliverable DJRA1.2. Solutions and protocols proposal for the network control, management and monitoring in a virtualized network context

This deliverable presents several research proposals for the FEDERICA network, in different subjects, such as monitoring, routing, signalling, resource discovery, and isolation. For each topic one or more possible solutions are elaborated, explaining the background, functioning and the implications of the proposed solutions.This deliverable goes further on the research aspects within FEDERICA. First of all the architecture of the control plane for the FEDERICA infrastructure will be defined. Several possibilities could be implemented, using the basic FEDERICA infrastructure as a starting point. The focus on this document is the intra-domain aspects of the control plane and their properties. Also some inter-domain aspects are addressed. The main objective of this deliverable is to lay great stress on creating and implementing the prototype/tool for the FEDERICA slice-oriented control system using the appropriate framework. This deliverable goes deeply into the definition of the containers between entities and their syntax, preparing this tool for the future implementation of any kind of algorithm related to the control plane, for both to apply UPB policies or to configure it by hand. We opt for an open solution despite the real time limitations that we could have (for instance, opening web services connexions or applying fast recovering mechanisms). The application being developed is the central element in the control plane, and additional features must be added to this application. This control plane, from the functionality point of view, is composed by several procedures that provide a reliable application and that include some mechanisms or algorithms to be able to discover and assign resources to the user. To achieve this, several topics must be researched in order to propose new protocols for the virtual infrastructure. The topics and necessary features covered in this document include resource discovery, resource allocation, signalling, routing, isolation and monitoring. All these topics must be researched in order to find a good solution for the FEDERICA network. Some of these algorithms have started to be analyzed and will be expanded in the next deliverable. Current standardization and existing solutions have been investigated in order to find a good solution for FEDERICA. Resource discovery is an important issue within the FEDERICA network, as manual resource discovery is no option, due to scalability requirement. Furthermore, no standardization exists, so knowledge must be obtained from related work. Ideally, the proposed solutions for these topics should not only be adequate specifically for this infrastructure, but could also be applied to other virtualized networks.Postprint (published version

On the standardisation of Web service management operations

Given the current interest in TCP/IP network management research towards Web services, it is important to recognise how standardisation can be achieved. This paper mainly focuses on the standardisation of operations and not management information. We state that standardisation should be done by standardising the abstract parts of a WSDL document, i.e. the interfaces and the messages. Operations can vary in granularity and parameter transparency, creating four extreme operation signatures, all of which have advantages and disadvantages

Algorithms for advance bandwidth reservation in media production networks

Media production generally requires many geographically distributed actors (e.g., production houses, broadcasters, advertisers) to exchange huge amounts of raw video and audio data. Traditional distribution techniques, such as dedicated point-to-point optical links, are highly inefficient in terms of installation time and cost. To improve efficiency, shared media production networks that connect all involved actors over a large geographical area, are currently being deployed. The traffic in such networks is often predictable, as the timing and bandwidth requirements of data transfers are generally known hours or even days in advance. As such, the use of advance bandwidth reservation (AR) can greatly increase resource utilization and cost efficiency. In this paper, we propose an Integer Linear Programming formulation of the bandwidth scheduling problem, which takes into account the specific characteristics of media production networks, is presented. Two novel optimization algorithms based on this model are thoroughly evaluated and compared by means of in-depth simulation results

An ICT-oriented Management Solution for NGNs

NGN architecture reused several standards from the IP world, as exemplified by the Session Initiation Protocol SIP, which is ubiquitous in the majority of these network components. However, the NGN management architecture simply presented a very generic management model that follows TMN. Several management technologies are proposed, such as Web services, CORBA and SNMP, to implement management solutions. Network and systems management standardizing bodies currently promote newer technologies that aim to solve known shortcomings to these. This paper proposes a management solution for NGNs based on recent IP world technologies. The presented solution was implemented in the form of a middleware to manage NGN elements. This middleware was used in the management of an element belonging to the IP Multimedia Subsystem platform, namely the Policy and Charging Rules Function